Comparison of stress evolution under TGO growth simulated by two different methods in thermal barrier coatings

Evans, 2001, Mechanics-based scaling laws for the durability of thermal barrier coatings, Prog. Mater. Sci., 46, 249, 10.1016/S0079-6425(00)00007-4 Padture, 2002, Thermal barrier coatings for gas-turbine engine applications, Science, 296, 280, 10.1126/science.1068609 Clarke, 2018, 891 Schulz, 2001, Influence of substrate material on oxidation behavior and cyclic lifetime of EB-PVD TBC systems, Surf. Coat. Technol., 146–147, 117, 10.1016/S0257-8972(01)01481-5 Shillington, 1999, Spalling failure of a thermal barrier coating associated with aluminum depletion in the bond-coat, Acta Mater., 47, 1297, 10.1016/S1359-6454(98)00407-8 Chen, 2008, TGO growth behaviour in TBCs with APS and HVOF bond coats, Surf. Coat. Technol., 202, 2677, 10.1016/j.surfcoat.2007.09.042 Sun, 2013, Local stress evolution in thermal barrier coating system during isothermal growth of irregular oxide layer, Surf. Coat. Technol., 216, 237, 10.1016/j.surfcoat.2012.11.052 Sun, 2013, Local stress around cap-like portions of anisotropically and nonuniformly grown oxide layer in thermal barrier coating system, J. Mater. Sci., 48, 5962, 10.1007/s10853-013-7393-7 Ambrico, 2001, Stress and shape evolution of irregularities in oxide films on elastic-plastic substrates due to thermal cycling and film growth, Acta Mater., 49, 1577, 10.1016/S1359-6454(01)00059-3 Panicaud, 2006, On the growth strain origin and stress evolution prediction during oxidation of metals, Appl. Surf. Sci., 252, 5700, 10.1016/j.apsusc.2005.07.075 Maharjan, 2011, Residual stresses within oxide layers due to lateral growth strain and creep strain: analytical modeling, J. Appl. Phys., 110, 10.1063/1.3626052 Clarke, 2003, The lateral growth strain accompanying the formation of a thermally grown oxide, Acta Mater., 51, 1393, 10.1016/S1359-6454(02)00532-3 Ruan, 2012, Residual stress analysis in the oxide scale/metal substrate system due to oxidation growth strain and creep deformation, Acta Mech., 223, 2597, 10.1007/s00707-012-0739-4 Ruan, 2013, On the elastic and creep stress analysis modeling in the oxide scale/metal substrate system due to oxidation growth strain, Corros. Sci., 66, 315, 10.1016/j.corsci.2012.09.035 Hsueh, 1983, Oxidation induced stresses and some effects on the behavior of oxide films, J. Appl. Phys., 54, 6672, 10.1063/1.331854 Xie, 2019, Modelling of catastrophic stress development due to mixed oxide growth in thermal barrier coatings, Ceram. Int., 45, 11353, 10.1016/j.ceramint.2019.02.214 Su, 2014, Effect of TGO creep on top-coat cracking induced by cyclic displacement instability in a thermal barrier coating system, Surf. Coat. Technol., 254, 410, 10.1016/j.surfcoat.2014.06.052 Karlsson, 2001, A numerical model for the cyclic instability of thermally grown oxides in thermal barrier systems, Acta Mater., 49, 1793, 10.1016/S1359-6454(01)00073-8 Li, 2017, Effect of oxide growth on the stress development in double-ceramic-layer thermal barrier coatings, Ceram. Int., 43, 14763, 10.1016/j.ceramint.2017.07.218 Cen, 2019, Analysis of interface delamination in thermal barrier coating system with axisymmetric structure based on corresponding normal and tangential stresses, Surf. Coat. Technol., 358, 785, 10.1016/j.surfcoat.2018.12.008 Karlsson, 2002, A model study of displacement instabilities during cyclic oxidation, Acta Mater., 50, 1263, 10.1016/S1359-6454(01)00403-7 Sun, 2011, Thermal cycling induced crack nucleation and propagation in thermal barrier coating system, Key Eng. Mater., 462 Song, 2019, Effect of non-uniform growth of TGO layer on cracking behaviors in thermal barrier coatings: a numerical study, Surf. Coat. Technol., 370, 113, 10.1016/j.surfcoat.2019.04.069 He, 2000, The ratcheting of compressed thermally grown thin films on ductile substrates, Acta Mater., 48, 2593, 10.1016/S1359-6454(00)00053-7 Wei, 2019, Stress states in plasma-sprayed thermal barrier coatings upon temperature cycling: combined effects of creep, plastic deformation, and TGO growth, Ceram. Int., 0 Bargraser, 2012, Life approximation of thermal barrier coatings via quantitative microstructural analysis, Mater. Sci. Eng. A, 549, 76, 10.1016/j.msea.2012.04.008 Ranjbar-Far, 2011, Impact of the non-homogenous temperature distribution and the coatings process modeling on the thermal barrier coatings system, Mater. Des., 32, 728, 10.1016/j.matdes.2010.07.034 Ranjbar-Far, 2010, Simulation of the effect of material properties and interface roughness on the stress distribution in thermal barrier coatings using finite element method, Mater. Des., 31, 772, 10.1016/j.matdes.2009.08.005 Yu, 2018, Numerical study of residual stress and crack nucleation in thermal barrier coating system with plane model, Ceram. Int., 44, 5116, 10.1016/j.ceramint.2017.12.112 Yu, 2018, Effect of material properties on residual stress distribution in thermal barrier coatings, Ceram. Int., 44, 3371, 10.1016/j.ceramint.2017.11.127 Yu, 2017, Residual stress distribution along interfaces in thermal barrier coating system under thermal cycles, Ceram. Int., 43, 3089, 10.1016/j.ceramint.2016.11.119 Ranjbar-Far, 2010, Effect of residual stresses and prediction of possible failure mechanisms on thermal barrier coating system by finite element method, J. Therm. Spray Technol., 19, 1054, 10.1007/s11666-010-9512-1 Shi, 2019, Cracking behaviors of EB-PVD thermal barrier coating under temperature gradient, Ceram. Int., 45, 18518, 10.1016/j.ceramint.2019.06.071