Effect of coarse basalt aggregates on the properties of Ultra-high Performance Concrete (UHPC)

Richard, 1995, Composition of reactive powder concretes, Cem. Concr. Res., 25, 1501, 10.1016/0008-8846(95)00144-2 Yoo, 2016, Mechanical properties of ultra-high-performance fiber-reinforced concrete: a review, Cem. Concr. Compos., 73, 267, 10.1016/j.cemconcomp.2016.08.001 Yu, 2016, Impact resistance of a sustainable Ultra-high performance fibre reinforced concrete (UHPFRC) under pendulum impact loadings, Constr. Build. Mater., 107, 203, 10.1016/j.conbuildmat.2015.12.157 Makita, 2014, Tensile fatigue behaviour of Ultra-High Performance fibre reinforced concrete combined with steel rebars (R-UHPFRC), Int. J. Fatigue., 59, 145, 10.1016/j.ijfatigue.2013.09.004 Wang, 2014, Durability of an Ultra High performance fiber reinforced concrete (UHPFRC) under progressive aging, Cem. Concr. Res., 55, 1, 10.1016/j.cemconres.2013.09.008 Shi, 2015, A review on ultra high performance concrete: part I. Raw materials and mixture design, Constr. Build. Mater., 96, 368, 10.1016/j.conbuildmat.2015.08.095 Rozalija, 1997 J. Ma, M. Orgass, F. Dehn, D. Schmidt, N. V. Tue, Comparative Investigations on Ultra-High Performance Concrete with or without Coarse Aggregates, Proc. Int. Symp. Ultra High Perform. Concr. Kassel. (2004) 205–212. Collepardi, 1997, Mechanical properties of modified reactive powder concrete, ACI Spec. Publ., 173, 1 Wille, 2011, Ultra-High Performance Concrete with compressive strength exceeding 150 MPa (22ksi): A Simpler Way, ACI Mater. J., 108, 46 Peng, 2016, Impact resistance of basalt aggregated UHP-SFRC/fabric composite panel against small caliber arm, Int. J. Impact Eng., 88, 201, 10.1016/j.ijimpeng.2015.10.011 Tai, 2016, Performance of deformed steel fibers embedded in ultra-high performance concrete subjected to various pullout rates, Cem. Concr. Res., 89, 1, 10.1016/j.cemconres.2016.07.013 Yu, 2014, Effect of nano-silica on the hydration and microstructure development of Ultra-High Performance Concrete (UHPC) with a low binder amount, Constr. Build. Mater., 65, 140, 10.1016/j.conbuildmat.2014.04.063 B. Vermeulen, Ultra High Performance Concrete in Action, 2nd Grad. Lab AE Conf. 2013. Nikbin, 2014, A comprehensive investigation into the effect of water to cement ratio and powder content on mechanical properties of self-compacting concrete, Constr. Build. Mater., 57, 69, 10.1016/j.conbuildmat.2014.01.098 Domone, 2007, A review of the hardened mechanical properties of self-compacting concrete, Cem. Concr. Compos., 29, 1, 10.1016/j.cemconcomp.2006.07.010 Bentz, 1994, Evolution of porosity and calcium hydroxide in laboratory concretes containing silica fume, Cem. Concr. Res., 24, 1044, 10.1016/0008-8846(94)90027-2 Duan, 2013, Effects of metakaolin, silica fume and slag on pore structure, interfacial transition zone and compressive strength of concrete, Constr. Build. Mater., 44, 1, 10.1016/j.conbuildmat.2013.02.075 Shi, 2015, The hydration and microstructure of ultra high-strength concrete with cement–silica fume–slag binder, Cem. Concr. Compos., 61, 44, 10.1016/j.cemconcomp.2015.04.013 Nili, 2015, Investigating the effect of the cement paste and transition zone on strength development of concrete containing nanosilica and silica fume, Mater. Des., 75, 174, 10.1016/j.matdes.2015.03.024 Bentz, 2017, Limestone and silica powder replacements for cement: early-age performance, Cem. Concr. Compos., 78, 43, 10.1016/j.cemconcomp.2017.01.001 Kakali, 2000, Hydration products of C3A, C3S and Portland cement in the presence of CaCO3, Cem. Concr. Res., 30, 1073, 10.1016/S0008-8846(00)00292-1 Nehdi, 1996, Optimization of high strength limestone filler cement mortars, Cem. Concr. Res., 26, 883, 10.1016/0008-8846(96)00071-3 Zhu, 2005, Use of different limestone and chalk powders in self-compacting concrete, Cem. Concr. Res., 35, 1457, 10.1016/j.cemconres.2004.07.001 Wu, 2016, Influence of silica fume content on microstructure development and bond to steel fiber in ultra-high strength cement-based materials (UHSC), Cem. Concr. Compos., 71, 97, 10.1016/j.cemconcomp.2016.05.005 Lei, 2016, A new dispersing method on silica fume and its influence on the performance of cement-based materials, Constr. Build. Mater., 115, 716, 10.1016/j.conbuildmat.2016.04.023 Yajun, 2003, Effects of densified silica fume on microstructure and compressive strength of blended cement pastes, Cem. Concr. Res., 33, 1543, 10.1016/S0008-8846(03)00100-5 Soufeiani, 2016, Influences of the volume fraction and shape of steel fibers on fiber-reinforced concrete subjected to dynamic loading – A review, Eng. Struct., 124, 405, 10.1016/j.engstruct.2016.06.029 Habel, 2006, Development of the mechanical properties of an Ultra-High Performance Fiber Reinforced Concrete (UHPFRC), Cem. Concr. Res., 36, 1362, 10.1016/j.cemconres.2006.03.009 Mahmud, 2013, Experimental and Numerical Studies of Size effects of Ultra High Performance Steel Fibre Reinforced Concrete (UHPFRC) beams, Constr. Build. Mater., 48, 1027, 10.1016/j.conbuildmat.2013.07.061 Meng, 2017, Optimization and performance of cost-effective ultra-high performance concrete, Mater. Struct., 50, 29, 10.1617/s11527-016-0896-3 Alkaysi, 2016, Effects of silica powder and cement type on durability of ultra high performance concrete (UHPC), Cem. Concr. Compos., 66, 47, 10.1016/j.cemconcomp.2015.11.005 Gu, 2015, Ultrahigh performance concrete-properties, applications and perspectives, Sci. China Technol. Sci., 58, 587, 10.1007/s11431-015-5769-4 Funk, 1994 Brouwers, 2005, Self-compacting concrete: Theoretical and experimental study, Cem. Concr. Res., 35, 2116, 10.1016/j.cemconres.2005.06.002 Quercia, 2012, Water demand of amorphous nano silica and its impact on the workability of cement paste, Cem. Concr. Res., 42, 344, 10.1016/j.cemconres.2011.10.008 Yu, 2013, Development of cement-based lightweight composites – Part 1: mix design methodology and hardened properties, Cem. Concr. Compos., 44, 17, 10.1016/j.cemconcomp.2013.03.030 Yu, 2012, Development of a self-compacting gypsum-based lightweight composite, Cem. Concr. Compos., 34, 1033, 10.1016/j.cemconcomp.2012.05.004 M. Hunger, An integral design concept for ecological self-compacting concrete, PhD thesis, Eindhoven Universtiy of Technology, Eindhoven, the Netherland, 2010. R. Yu, Development of sustainable protective Ultra-High Performance Fibre Reinforced Concrete (UHPFRC), PhD thesis, Eindhoven Universtiy of Technology, Eindhoven, the Netherland, 2015. EN-1015-3, Methods of test for mortar for masonry – Part 3: Determination of consistence of fresh mortar (by flow table), Br. Stand. Institution-BSI CEN Eur. Comm. Stand. (2007). Yu, 2011, Microstructure and mechanical properties of β-hemihydrate produced gypsum: an insight from its hydration process, Constr. Build. Mater., 25, 3149, 10.1016/j.conbuildmat.2010.12.005 Li, 2017, Effect of PCE-type superplasticizer on early-age behaviour of ultra-high performance concrete (UHPC), Constr. Build. Mater., 153, 740, 10.1016/j.conbuildmat.2017.07.145 EN 12390-3, Testing hardened concrete – Part 3: Compressive strength of test specimens, Br Stand. Institution-BSI CEN Eur. Comm. Stand., 2009. EN-196-1, Methods of testing cement – Part 1: Determination of strength., Br. Stand. Institution-BSI CEN Eur. Comm. Stand. (2005). EN 12390-6, Testing hardened concrete – Part 6: Tensile splitting strength of test specimens, Br Stand. Institution-BSI CEN Eur. Comm. Stand., 2000. DIN 52-450, Determination of Shrinkage and Expansion of small test specimens, Ger. Stand. (1985). Hajime Okamura, 2003, Ouchi, self-compacting concrete, J. Adv. Concr. Technol., 1, 5, 10.3151/jact.1.5 Domone, 1997, Testing of binders for high performance concrete, Cem. Concr. Res., 27, 1141, 10.1016/S0008-8846(97)00107-5 Schröfl, 2012, Preferential adsorption of polycarboxylate superplasticizers on cement and silica fume in ultra-high performance concrete (UHPC), Cem. Concr. Res., 42, 1401, 10.1016/j.cemconres.2012.08.013 Sekkal, 2013, Nanoscale analysis of the morphology and surface stability of calcium carbonate polymorphs, Sci. Rep., 3, 1587, 10.1038/srep01587 Hosseini, 2011, Developing concrete recycling strategies by utilization of nano-SiO 2 particles, Waste Biomass Valorization., 2, 347, 10.1007/s12649-011-9071-9 Itim, 2011, Compressive strength and shrinkage of mortar containing various amounts of mineral additions, Constr. Build. Mater., 25, 3603, 10.1016/j.conbuildmat.2011.03.055 Vance, 2013, Hydration and strength development in ternary portland cement blends containing limestone and fly ash or metakaolin, Cem. Concr. Compos., 39, 93, 10.1016/j.cemconcomp.2013.03.028 Wang, 2012, Preparation of Ultra-High Performance Concrete with common technology and materials, Cem. Concr. Compos., 34, 538, 10.1016/j.cemconcomp.2011.11.005 Mermerdaş, 2015, Explicit formulation of drying and autogenous shrinkage of concretes with binary and ternary blends of silica fume and fly ash, Constr. Build. Mater., 94, 371, 10.1016/j.conbuildmat.2015.07.074 Zhang, 2015, Drying shrinkage and microstructure characteristics of mortar incorporating ground granulated blast furnace slag and shrinkage reducing admixture, Constr. Build. Mater., 93, 267, 10.1016/j.conbuildmat.2015.05.103 Varhen, 2016, Effect of the substitution of cement by limestone filler on the rheological behaviour and shrinkage of microconcretes, Constr. Build. Mater., 125, 375, 10.1016/j.conbuildmat.2016.08.062 R. Detwiler, P.D. Tennis, The Use of Limestone in Portland Cement : A State-of-the-Art Review, 2003. Tennis, 2011, State-of-the-art report on use of limestone in cements at levels of up to 15%, Portl. Cem. Assoc., 1 Mackenzie, 2002, The elastic constants of a solid containing spherical holes, Proc. Phys. Soc. Sect. B, 63, 2, 10.1088/0370-1301/63/1/302 Bentz, 2008, A review of early-age properties of cement-based materials, Cem. Concr. Res., 38, 196, 10.1016/j.cemconres.2007.09.005 Wongkeo, 2012, Compressive strength and drying shrinkage of fly ash-bottom ash-silica fume multi-blended cement mortars, Mater. Des., 36, 655, 10.1016/j.matdes.2011.11.043 Benachour, 2008, Effect of a high calcite filler addition upon microstructural, mechanical, shrinkage and transport properties of a mortar, Cem. Concr. Res., 38, 727, 10.1016/j.cemconres.2008.02.007 Alsayed, 1998, Influence of superplasticizer, plasticizer, and silica fume on the drying shrinkage of high-strength concrete subjected to hot-dry field conditions, Cem. Concr. Res., 28, 1405, 10.1016/S0008-8846(98)00102-1 Fennis, 2009 Ferraris, 1998 Van Der Putten, 2017, Determination of packing profiles for the verification of the compressible packing model in case of UHPC pastes, Mater. Struct., 50, 118, 10.1617/s11527-016-0986-2 EN-1097-3, Tests for mechanical and physical properties of aggregates- Part 3: Determination of loose bulk density and voids, Br. Stand. Institution-BSI CEN Eur. Comm. Stand. (1998). Brouwers, 2006, Particle-size distribution and packing fraction of geometric random packings, Phys. Rev. E, 74, 31309, 10.1103/PhysRevE.74.031309 Madandoust, 2015, Shahabi, assessment of factors influencing mechanical properties of steel fiber reinforced self-compacting concrete, Mater. Des., 83, 284, 10.1016/j.matdes.2015.06.024