Filtration and dust cake experiment by ceramic candle filter in high temperature conditions
Tóm tắt
Particulate collection at high temperature and high pressure (HTHP) is important in an advanced coal power generation system not only to improve the thermal efficiency of the system, but also to prevent the gas turbine from erosion and to meet the emission limits of the effluent gas. The specifications for particulate collection in those systems such as Integrated Gasification Combined Cycle (IGCC) and Pressurized Fluidized Bed Combustion (PFBC) require absolutely high collection efficiency and reliability. Advanced cyclone, granular bed filter, electrostatic precipitator, and ceramic filter have been developed for particulate collection in the advanced coal power generation system. However, rigid ceramic filters and granular bed filters among them show the best potential. The problems experienced of these systems on performance, materials, and mechanical design were investigated. Ceramic candle filters have the best potential for IGCC at this moment because they have nearly the highest efficiency compared with other filtering systems and have accumulated many reliable design data from many field experiences. The purpose of this study was to investigate the efficiency of ceramic filters and stability of material against high temperature and longterm operation condition by applying fly ash on the surface of the filter and relation of pressure drop and dust cake thickness. Experimental conditions were 50 hours at 450 °C, 650 °C and 850 °C.
Tài liệu tham khảo
Alvin, M. A., “Evaluation of Ceramic Filter Materials, Selection for Application,” Proceedings of the Coal-Fired Power Systems 93-Advanced in IGCC and PFBC Review Meetings, DOE, Morgantown, DE 93000289, 515 (1993).
Alvin, M. A., Lane, J. E., Tressler, R. E. and Jakus, K., “Long Term Hightemperature Degradation of Ceramic Cross-flow Filter,” Proceedings of the Ninth Annual Gasification and Gas Stream Cleanup Systems Contractors Review Meeting, METC, Morgantown, WV, 129 (1989).
Choi, J. H. and Chung, J. D., “The Design and Operation Technologies of Ceramic Filters for High Temperature High Pressure Dust Collection,”Theories and Application of Chem. Eng.,1, 891 (1995).
Choi, J. H., Keum, S. M. and Chung, J. D., “Operation of Ceramic Candle Filter at High Temperature for PFBC Application,”Korean J. Chem. Eng.,16, 823 (1999).
Choi, J. H, Kim, S. K. and Ha, S. J., “The Preparation of V2O5/TiO2 Catalyst Supported on the Ceramic Filter Candle for Selective Reduction of NO,”Korean J. Chem. Eng.,18, 456 (2001).
Dust, M., Reinhardt, A., Vollmer, H. and Koch, W., “Filtration & Separation,” Academic Press, London (1994).
Gilliberti, D. F. and Lippert, T E., “Gas Cleaning at High Temperatures,”The Inst. of Chem. Eng. Symposium,331, 3 (1986).
John, S., “Grimethrope High-temperature/High-pressure Gas Filter Experimental Program,” EPRITR-100499,2, 5 (1992).
Kanaoka, C., Kishima, T. and Furuuchi, M., “Accumulation and Release of Dust from Rigid Ceramic Filter Element; 3rd International Symposium on Gas Cleaning at High Temperatures, 183 (1996).
Laux, S., Giernoth, B., Bulak, H. and Renz, U., “Aspects of Pulse Jet Cleaning of Ceramic Filter Elements,” Aachen Univ., Germany (1990).
Laux, S., Giernoth, B., Bulak, H. and Renz, U., “Hot Gas Filtration with Ceramic Filter Elements,” Proceedings of the 12th International Conference on Fluidized-Bed Combustion, San Diego, USA, May 8-13 (1993).
Laux, S., Schiffer, H. P. and Renz, U, “Terformance of Ceramic Filter Elements for Combined Cycle Power Plant High Temperature Gas Clean-Up,” Proceedings of the 11th International Conference on Fluidized-Bed Combustion, Montreal, Canada, April 21-25 (1991).
Pulkrabek, W. and Ibele, W., “The Effect of Temperature on the Permeability of a Porous Material,”Int. J. Heat and Mass Transfer,30, 1103 (1987).
Seville, J. P. K., Ivatt, S. and Burnard, G K., “Recent Advances Particulate Removal from Hot Process Gases,” 3rd International Symposium on Gas Cleaning at High Temperatures, 3 (1996).
Yang, D. H., Lee, D. H. and Han, G. Y., “Pressure Fluctuation Characteristics of Polyethylene Particles in a Gas-solid Fluidized Bed with Different Distributors,”Korean J. Chem. Eng.,19,1112 (2002).