Micromechanical analysis of off-axis loading of fiber reinforced composites with imperfect interface bonding

Shen, 2006 Huang, 2006 Evans, 2001, The topological design of multifunctional cellular metals, Prog Mater Sci, 46, 309, 10.1016/S0079-6425(00)00016-5 Tvergaard, 1990, Analysis of tensile properties for a whisker-reinforced metal-matrix composite, Acta Metall Mater, 3, 185, 10.1016/0956-7151(90)90048-L Wieckowski, 2000, Dual finite element methods in homogenization for elastic–plastic fibrous composite material, Int J Plasticity, 16, 199, 10.1016/S0749-6419(99)00070-4 Jiang, 2004, Elastic–plastic stress transfer in short fibre-reinforced metal-matrix composites, Compos Sci Technol, 64, 1661, 10.1016/j.compscitech.2003.12.003 Majumdar BS, Newaz GM. Inelastic deformation of metal matrix composites: plasticity and damage mechanisms—Part II. NASA Contractor Report 189096—Part II; 1992. Lissenden, 1996, Interfacial debonding in laminated titanium matrix composites, Mech Mater, 22, 279, 10.1016/0167-6636(95)00031-3 Lissenden, 1995, Numerical modeling of damage development and viscoplastic in metal matrix composites, Comput Methods Appl Mech Eng, 126, 289, 10.1016/0045-7825(95)00810-N Mondal, 2006, FEM modeling of the interface and its effect on the elasto-plastic behavior of metal matrix composites, Mater Sci Eng A, 433, 286, 10.1016/j.msea.2006.06.094 Biner, 1996, A finite element method analysis of the role of interface behavior in the creep rupture characteristics of a discontinuously reinforced composite with sliding grain boundaries, Mater Sci Eng A, 208, 239, 10.1016/0921-5093(95)10045-8 Zhou, 2001, Three-dimensional FEM interface coupled method and its engineering application, Finite Elem Anal Des, 37, 739, 10.1016/S0168-874X(01)00041-5 Povirk, 1993, Finite element simulations of fiber pull-out, J Eng Mater Technol, 115, 286, 10.1115/1.2904220 Jones, 1967, Waves at flexibly bonded interfaces, J Appl Mech, 34, 905, 10.1115/1.3607854 Aboudi, 1987, Damage in composites—modeling of imperfect bonding, Compos Sci Technol, 28, 103, 10.1016/0266-3538(87)90093-5 Nie, 2005, A micromechanical model for effective elastic properties of particulate composites with imperfect interfacial bonds, Int J Solids Struct, 42, 4179, 10.1016/j.ijsolstr.2004.12.009 Lee, 2001, A damage constitutive model of progressive debonding in aligned discontinuous fiber composites, Int J Solids Struct, 38, 875, 10.1016/S0020-7683(00)00060-3 Orozco, 1999, Plastic analysis of complex microstructure composites using the generalized method of cells, AIAA J, 37, 482, 10.2514/2.739 Tsai, 2008, Investigating thermal residual stress effect on mechanical behaviors of fiber composites with different fiber arrays, Composites Part B, 39, 714, 10.1016/j.compositesb.2007.05.005 Pindera MJ, Bednarcyk BA. An efficient implementation of the GMC micromechanics model for multi-phased materials with complex microstructures. NASA Contractor Report 202350; 1997. Arnold SM, Bednarcyk BA, Aboudi J. Comparison of the computational efficiency of the original versus reformulated high-fidelity generalized method of cells. NASA/TM-2004-213438; 2004. Bansal, 2006, Finite-volume direct averaging micromechanics of heterogeneous materials with elastic–plastic phases, Int J Plasticity, 22, 775, 10.1016/j.ijplas.2005.04.012 Achenbach, 1989, Effect of interfacial zone on mechanical behavior and failure of fiber-reinforced composites, J Mech Phys Solids, 37, 381, 10.1016/0022-5096(89)90005-7 Goldberg RK, Arnold SM. A study of influencing factors on the tensile response of a titanium matrix composite with weak interfacial bonding. NASA/TM-2000-209798; 2000. Levy, 1996, The effective dilatational response of fiber-reinforced composites with nonlinear interface, J Appl Mech, 63, 357, 10.1115/1.2788873 Bodner, 1975, Constitutive equations for elastic viscoplastic strain-hardening materials, J Appl Mech, 42, 385, 10.1115/1.3423586 Paley, 1992, Micromechanical analysis of composites by the generalized cells model, Mech Mater, 14, 127, 10.1016/0167-6636(92)90010-B Bednarcyk, 2001, Micromechanics-based deformation and failure prediction for longitudinally reinforced titanium composites, Compos Sci Technol, 61, 705, 10.1016/S0266-3538(01)00004-5 Lissenden, 1995, Numerical modelling of damage development and viscoplasticity in metal matrix composites, Comput Methods Appl Mech Eng, 126, 289, 10.1016/0045-7825(95)00810-N