Surface treatment of alumina ceramic for improved adhesion to a glass fibre-reinforced polyester composite

Zaera, 2011, Ballistic impacts on polymer matrix composites, composite armor, personal armor, 305 Grujicic, 2007, Ballistic performance of alumina/S-2 glass-reinforced polymer–matrix composite hybrid lightweight armor against armor piercing (AP) and non-AP projectiles, Multidiscip Model Mater Struct, 3, 287, 10.1163/157361107781389562 Grujicic, 2012, The role of adhesive in the ballistic/structural performance of ceramic/polymer matrix composite hybrid armor, Mater Des, 41, 380, 10.1016/j.matdes.2012.05.023 Medvedovski, 2010, Ballistic performance of armour ceramics: influence of design and structure. Part 2, Ceram Int, 36, 2117, 10.1016/j.ceramint.2010.05.022 Medvedovski, 2010, Ballistic performance of armour ceramics: influence of design and structure. Part 1, Ceram Int, 36, 2103, 10.1016/j.ceramint.2010.05.021 Opportunities in protection materials science and technology for future army applications. Washingon: National Academy of Sciences, The National Academies Press; 2011. Zaera, 2000, Modelling of the adhesive layer in mixed ceramic/metal armours subjected to impact, Compos A: Appl Sci Manuf, 31, 823, 10.1016/S1359-835X(00)00027-0 Kinloch, 1987 Harris, 2012, Surface preparation of alumina for improved adhesive bond strength in armour applications, Ceram Eng Sci Proc Adv Ceram Armor VIII, 33, 149, 10.1002/9781118217498.ch14 Bujanda, 2008 Bujanda, 2006 Park, 1998, The effect of surface roughness on the adhesion properties of ceramic/hybrid FRP adhesively bonded systems, J Adhes Sci Technol, 12, 713, 10.1163/156856198X00254 Rodriguez-Santiago, 2013, Modification of silicon carbide surfaces by atmospheric pressure plasma for composite applications, ACS Appl Mater Interfaces, 5, 4725, 10.1021/am303227q Bujanda AA, Rodriguez-Santiago V, Ho CC, Stein CE, Jensen RE, Pappas DD. Atmospheric plasma treatment of polymer films and alumina ceramics for enhanced adhesive bonding. In: Proceedings of the 34th annual meeting of the adhesion society. Savannah; 2011. Asai, 2001, Influence of ceramic surface treatment on peel-off strength between aluminum nitride and epoxy-modified polyaminobismaleimide adhesive, IEEE Trans Adv Packag, 24, 104, 10.1109/6040.909633 Harris, 2013, Surface preparation of silicon carbide for improved adhesive bond strength in armour applications, J Eur Ceram Soc, 33, 2925, 10.1016/j.jeurceramsoc.2013.05.026 Tanoglu, 1998, Use of silane coupling agents to enhance the performance of adhesively bonded alumina to resin hybrid composites, Int J Adhes Adhes, 18, 431, 10.1016/S0143-7496(98)00021-9 Rodrigues, 2013, Silane surface modification of boron carbide in epoxy composites, Int J Adhes Adhes, 46, 62, 10.1016/j.ijadhadh.2013.05.014 Buchwalter, 1991, Adhesion of polyimides to ceramics ‐ effects of aminopropyltriethoxysilane and temperature and humidity exposure on adhesion, J Adhes Sci Technol, 5, 333, 10.1163/156856191X00396 Blatz, 2003, Resin–ceramic bonding: a review of the literature, J Prosthet Dent, 89, 268, 10.1067/mpr.2003.50 Harris AJ, Yeomans JA, Smith PA, Vaughan B, Burnage ST. Surface treatment of alumina and silicon carbide for improved adhesive bond strength in armour. Presented at the 38th International Conference and Exposition on Advanced Ceramics and Composites. Daytona Beach; 2014. Wang, 2012, Synthesis of a novel preceramic polymer (V-PMS) and its performance in heat-resistant organic adhesives for joining SiC ceramic, J Eur Ceram Soc, 32, 3415, 10.1016/j.jeurceramsoc.2012.03.032 Oh, 1990, Adhesion of polyimides to ceramic substrates ‐ Role of acid–base interactions, J Adhes Sci Technol, 4, 303, 10.1163/156856190X00315 Moore, 2008, An introduction to the special issue on peel testing, Int J Adhes Adhes, 28, 153, 10.1016/j.ijadhadh.2007.01.001 Xie, 1997, Peel test for characterization of polymer composite concrete interface, J Compos Mater, 31, 1806, 10.1177/002199839703101802 Karbhari, 1996, Investigation of bond between concrete and composites: use of a peel test, J Reinf Plast Compos, 15, 208, 10.1177/073168449601500206 de Freitas, 2014, Adhesion properties of bonded composite-to-aluminium joints using peel tests, J Adhes, 90, 511, 10.1080/00218464.2013.850424 Moore DR, Williams JG. A protocol for the determination of the adhesive fracture toughness of flexible laminates by peel testing: fixed arm and T-peel methods. ESIS TC4 Test Protocol. London: Mechanical Engineering Department, Imperial College London, (〈http://www3.imperial.ac.uk/meadhesion/testprotocols/peel〉); 2010 [accessed 24.01.13]. Mehmood, 2012, Properties and performance of flax yarn/thermoplastic polyester composites, J Reinf Plast Compos, 31, 1746, 10.1177/0731684412441686 Pocius, 1997 Digby, 1998, The international collaborative programme on organosilane coupling agents: an introduction, Int J Adhes Adhes, 18, 261, 10.1016/S0143-7496(98)80059-6 Johnsen, 2003, Reflection-absorption FT-IR studies of the specific interaction of amines and an epoxy adhesive with GPS treated aluminium surfaces, Int J Adhes Adhes, 23, 157, 10.1016/S0143-7496(03)00008-3 ISO 25178-2. Geometrical product specifications (GPS) – surface texture: Areal, Part 2: Terms, definitions and surface texture parameters. Geneva: International Organization for Standardization; 2012 Guzman-Castillo, 2003, The surface energy of quasi-amorphous gamma-alumina calculated from the temperature of the gamma-alpha transition, J Non-Cryst Solids, 329, 53, 10.1016/j.jnoncrysol.2003.08.012 Joud JC, Vittoz C, Dubois PE. The van der Waals contribution to the surface energy of oxides. In: Proceedings of the international conference on high temperature capillarity. Cracow; 1997. Saga, 1996, Identification and removal of trace organic contamination on silicon wafers stored in plastic boxes, J Electrochem Soc, 143, 3279, 10.1149/1.1837198 Bain, 1988, Depth sensitivity of wetting: monolayers of w-mercapto ethers on gold, J Am Chem Soc, 110, 5897, 10.1021/ja00225a050 Gledhill, 1978, Relationship between mechanical properties of and crack propagation in epoxy resin adhesives, Polymer, 19, 574, 10.1016/0032-3861(78)90285-9 Greenhalgh, 2009 Pinho, 2006, Fracture toughness of the tensile and compressive fibre failure modes in laminated composites, Compos Sci Technol, 66, 2069, 10.1016/j.compscitech.2005.12.023 Huang, 1989, Effects of fiber bridging on GIC of a unidirectional glass epoxy composite, Compos Sci Technol, 35, 283, 10.1016/0266-3538(89)90040-7 Hu, 1993, Mode-I delamination and fiber bridging in carbon-fiber epoxy composites with and without PVAL coating, Compos Sci Technol, 46, 147, 10.1016/0266-3538(93)90170-L Abel, 2000, Evidence of specific interaction between gamma-glycidoxypropyltrimethoxysilane and oxidized aluminium using high-mass resolution ToF-SIMS, Surf Interface Anal, 29, 115, 10.1002/(SICI)1096-9918(200002)29:2<115::AID-SIA702>3.0.CO;2-6 Rattana, 2002, The interaction of a commercial dry film adhesive with aluminium and organosilane treated aluminium surfaces: a study by XPS and ToF-SIMS, Int J Adhes Adhes, 22, 205, 10.1016/S0143-7496(01)00056-2 Luciani, 1996, Interfacial tension in polymer blends. 1. Theory, Polym Netw Blends, 6, 41 Iyengar, 1967, Role of adhesive-substrate compatibility in adhesion, J Appl Polym Sci, 11, 2311, 10.1002/app.1967.070111118