A low noise 230 GHz sis receiver
Tóm tắt
We report the construction of a 230GHz superconductor insulator superconductor (SIS) tunnel junction receiver utilizing a full height rectangular waveguide mixer with two tuning elements i.e. an E plane and backshort tuner. Preliminary results indicate that the receiver exhibits a best double side-band response of 114K±15K (averaged over a 500 MHz IF bandwidth) at a frequency of 228GHz and at an ambient temperature of approximately 2.4K. With the exception of a region in the vicinity of 250GHz, the receiver shows an excellent response over an RF input range of 200 to 290GHz. Finally, the receiver has been successfully employed on the new Caltech Submillimeter Observatory 10m antenna on Mauna Kea, Hawaii.
Tài liệu tham khảo
Tucker, J. R., “Quantum limited detection in tunnel junction mixers,” IEEE J. Quantum Electron, vol. QE15, pp. 1234–1258, Nov. 1979.
Dunkleberger, L. N., “Stencil technique for the preparation of thin-film Josephson devices,” J. Vac. Sci. Tech., vol. 15, pp. 88–90, Jan. 1978.
Dolan, G. J., “Offset masks for lift-off photoprocessing,” Appl. Phys. Lett., vol. 31, pp. 337–339, Sept. 1977.
Woody, D. P., Miller, R. E., and Wengler, M. J., “85–115 GHz receivers for radio astronomy,” IEEE Trans. Microwave Theory Tech., vol. MTT-33, pp. 90–95, Feb. 1985.
Sutton, E. C., “A superconducting tunnel junction receiver for 230 GHz”, IEEE Trans. Microwave Theory Tech., vol. MTT-31, pp. 589–592, July 1983.
D'Addario, L. R., “An SIS mixer for 90–120 GHz with gain and wide bandwidth”, Int. J. Infrared Millimeter Waves, Vol. 5, No. 11, pp. 1419–1443, 1984.
Pan, S. K., Feldman, M. J., Kerr, A. R., and Timbie, P., “Low noise 115 GHz receiver using superconducting tunnel junctions,” Appl. Phys. Lett., Vol. 43, pp. 786–788, Oct. 1983.
Blundell, R., and Gundlach, K. H., “SIS Junction response from the millimeter into the submillimeter wave region”, Proc, SPIE, vol. 598, Instrumentation for Submillimeter Spectroscopy, Cannes, France, pp. 16–19, Dec. 1985.
Wengler, M. J., Woody, D. P., Miller, R. E., Phillips, T. G., “A low noise receiver for millimeter and submillimeter wavelengths,” Int. J. Infrared Millimeter Waves, vol. 6, pp. 697–706, Aug. 1985.
Mixer block constructed by Custom Microwave, Longmont, CO.
Thomas, B. M., “Design of corrugated conical horns”, IEEE Trans. Antennas Propagation, vol. AP-26, pp. 367–372, March 1978.
Clarricoats, P. J. B., and Olver, A. D., “Corrugated horns for microwave antennas,” IEE. Electromagnetic Waves, Series 18.
Bathker, D. A., “A stepped mode transducer using homogeneous waveguides”, IEEE Trans. Microwave Theory Tech., vol. MTT-15, pp. 128–130, 1967.
Type MY80592 Epoxy, Ross Chemical Co., Detroit, MI.
Contact spring bellows part no. 2510, Servometer, Cedar Grove, NJ.
SMA Connector part no., 2052-1200-00. Omni Spectra Ltd, Memimack, NH.
SC12 Silver Paint, Micro Circuit Technology, New Buffalo, MI.
Brewer, M. K., and Rasianen, A. V., “Dual-harmonic noncontacting millimeter waveguide backshorts: theory, design and test,” IEEE Trans., Microwave Theory Tech., vol. MTT-30, pp. 708–714, May 1982.
Smith, A. D., and Richards, P. L. “Analytic solutions to superconductor insulator spuperconductor quantum mixer theory,” J. Appl. Phys. vol. 53, pp. 3806–3812, May 1982.
Type ATC 700 A OR5B CA 50, American Technical Ceramics, Huntingdon Station, NY.
RT/Duriod 6010.5, with rolled Cu foil (1 oz), Rogers Corp., Chandler, AZ.
Type WA4PG-103J-S, Mini Systems, Inc., North Attleboro, MA.
Howell, J. Q., “A quick accurate method to measure the dielectric constant of microwave integrated-circuit substrates,” IEEE Trans. Microwave Theory Tech. vol. MTT21, pp. 142–143, Mar. 1973.
Touchstone CAD Software, Eesof, Westlake Village, CA.
Weineb, S., Fenstermacher, D.L., and Harris, R. W., “Ultra-low-noise 1.2 to 1.7 GHz cooled GaAs-Fet amplifiers”, IEEE Trans. Microwave Theory Tech., vol. MTT-30, pp. 849–853, June 1982.
Silver, S., “Microwave antenna theory and design,” IEE Electromagnetic Waves Series 19, pp. 395–398.
Padman, R., “Reflection and cross polarization properties of grooved dielectric panels,” IEEE Trans., Antennas Propagations vol. AP-26, no. 5, pp. 741, Sept. 1978.
Archer, J. W., “Low-noise receiver technology for near millimeter wavelenghts,” Infrared Millimeter Waves, vol. 15, pp. 71.
Emerson and Cummings, Canton, MA.
Ellison, B. N., to be published.
Model CTI 350 Cryodyne, CTI-Cryogenics, Inc., Waltham, MA.
Type UT-141-50-SS-SS, Micro or Coax Components, Inc., Collegeville, PA.
Model 08-C006-07-000, Edwards High Vacuum, Crowley, England.
Adolf Meller Co., Providence, RI.
Armstrong, K. R., and Low, F. J., “New techniques for far infrared filters,” Appl. Optics, vol. 12, no. 9, pp. 2007–2009, Sept. 1973.
Fluorocarbon, Anaheim, CA.
Ibruegger, J., “Transmission of room temperature radiation by materials at low temperature,” Int. J. Infrared Millimeter Waves vol. 5, no. 5, pp. 655–665, 1984.