Effects of heater size and orientation on pool boiling heat transfer from microporous coated surfaces

N. Zuber, Hydrodynamic aspects of boiling heat transfer, AEC Report No. AECU-4439, Physics and Mathematics, 1959 A.T. Storr, The effects of heating surface geometry and orientation on nucleate boiling of subcooled water, M.S. Thesis, Washington University, Sever Institute of Technology, Department of Chemical Engineering, 1958 Marcus, 1963, The effect of surface configuration on nucleate boiling heat transfer, Int. J. Heat Mass Transfer, 6, 863, 10.1016/0017-9310(63)90069-3 Githinji, 1963, Some effect of the orientation of the heating surface in nucleate boiling, ASME J. Heat Transfer, 85, 379, 10.1115/1.3686129 Nishikawa, 1984, Effect of surface configuration on nucleate boiling heat transfer, Int. J. Heat Mass Transfer, 27, 1559, 10.1016/0017-9310(84)90268-0 Beduz, 1988, Angular dependence of boiling heat transfer mechanisms in liquid nitrogen, Adv. Cryogenic Engrg., 33, 363, 10.1007/978-1-4613-9874-5_45 El-Genk, 1993, Transient boiling from inclined and downward-facing surfaces in a saturated pool, Int. J. Refrigeration, 16, 414, 10.1016/0140-7007(93)90058-G Chang, 1996, Heater orientation effects on pool boiling of micro-porous-enhanced surfaces in saturated fc-72, ASME J. Heat Transfer, 118, 937, 10.1115/1.2822592 Lienhard, 1985, On the two regimes of nucleate boiling, ASME J. Heat Transfer, 107, 262, 10.1115/1.3247392 Zuber, 1963, Nucleate boiling the region of isolated bubbles and similarity with natural convection, Int. J. Heat Mass Transfer, 6, 53, 10.1016/0017-9310(63)90029-2 Moissis, 1963, On the hydrodynamic transition in nucleate boiling, ASME J. Heat Transfer, 85, 221, 10.1115/1.3686075 Jung, 1987, Effects of enhanced surfaces and surface orientation on nucleate and film boiling heat transfer in r-11, Int. J. Heat Mass Transfer, 30, 2627, 10.1016/0017-9310(87)90144-X Lyon, 1965, Boiling heat transfer and peak nucleate boiling fluxes in saturated liquid helium between the λ and critical temperatures, Adv. Cryogenic Engrg., 10, 371 Vishnev, 1974, Effect of orienting the hot surface with respect to the gravitational field on the critical nucleate boiling of a liquid, J. Engrg. Phys., 24, 43, 10.1007/BF00827332 Howard, 1998, Orientation effects on pool boiling critical heat flux (chf) and modeling of chf for near-vertical surfaces, Int. J. Heat Mass Transfer, 42, 1665, 10.1016/S0017-9310(98)00233-6 Gogonin, 1977, Critical heat flux as a function of heater size for a liquid boiling in a large enclosure, J. Engrg. Phys., 33, 1286, 10.1007/BF00860899 S. Ishigai, K. Inoue, Z. Kiwaki, T. Inai, Boiling heat transfer from a flat surface facing downward, in: Proceedings of the International Heat Transfer Conference, Boulder, CO, 1961, pp. 224–229 Granovskii, 1994, The crisis of nucleate boiling on a horizontal surface facing downward, High Temp., 32, 78 Lienhard, 1973, Peak pool boiling heat-flux measurements on finite horizontal flat plates, ASME J. Heat Transfer, 95, 477, 10.1115/1.3450092 Saylor, 1989, The effect of a dimensionless length scale on the critical heat flux in saturated, pool boiling, ASME Publication, HTD-108, 71 Park, 1988, Effects of size of simulated microelectronic chips on boiling and critical heat flux, ASME J. Heat Transfer, 110, 728, 10.1115/1.3250552 O'Connor, 1995, A dielectric surface coating technique to enhance boiling heat transfer from high power microelectronics, IEEE Trans. CPMT, Part A, 18, 656 Chang, 1997, Boiling heat transfer phenomena from micro-porous and porous surfaces in saturated fc-72, Int. J. Heat Mass Transfer, 40, 4437, 10.1016/S0017-9310(97)00055-0 Chang, 1997, Enhanced boiling heat transfer from micro-porous surfaces: effects of a coating composition and method, Int. J. Heat Mass Transfer, 40, 4449, 10.1016/S0017-9310(97)00057-4 A. Bar-Cohen, A. McNeil, Parametric effects of pool boiling critical heat flux in dielectric liquids, ASME Pool and External Flow Boiling (1992) 171–175 Tong, 1988, A bubble sweeping heat transfer mechanism for low flux boiling on downward-facing inclined surfaces, ASME Publication, HTD-104, 173 Tong, 1990, Contact angle effects on boiling incipience of highly-wetting liquids, Int. J. Heat Mass Transfer, 33, 91, 10.1016/0017-9310(90)90144-J Mudawar, 1997, An analytical model for near-saturated pool boiling critical heat flux on vertical surfaces, Int. J. Heat Mass Transfer, 40, 2327, 10.1016/S0017-9310(96)00298-0