Modeling and Simulation of Nanoindentation

JOM - Tập 69 - Trang 2256-2263 - 2017
Sixie Huang1, Caizhi Zhou1,2
1Department of Materials Science and Engineering, Missouri University of Science and Technology, Rolla, USA
2Department of Mechanical and Aerospace Engineering, Missouri University of Science and Technology, Rolla, USA

Tóm tắt

Nanoindentation is a hardness test method applied to small volumes of material which can provide some unique effects and spark many related research activities. To fully understand the phenomena observed during nanoindentation tests, modeling and simulation methods have been developed to predict the mechanical response of materials during nanoindentation. However, challenges remain with those computational approaches, because of their length scale, predictive capability, and accuracy. This article reviews recent progress and challenges for modeling and simulation of nanoindentation, including an overview of molecular dynamics, the quasicontinuum method, discrete dislocation dynamics, and the crystal plasticity finite element method, and discusses how to integrate multiscale modeling approaches seamlessly with experimental studies to understand the length-scale effects and microstructure evolution during nanoindentation tests, creating a unique opportunity to establish new calibration procedures for the nanoindentation technique.

Tài liệu tham khảo

W. Gerberich, J. Nelson, E. Lilleodden, P. Anderson, and J. Wyrobek, Acta Mater. 44, 3585 (1996). J. Pethicai, R. Hutchings, and W.C. Oliver, Philos. Mag. A 48, 593 (1983). W.C. Oliver and G.M. Pharr, J. Mater. Res. 7, 1564 (1992). G. Pharr and W. Oliver, MRS Bull. 17, 28 (1992). B. Bhushan, A.V. Kulkarni, W. Bonin, and J.T. Wyrobek, Philos. Mag. A 74, 1117 (1996). U. Landman, W. Luedtke, N.A. Burnham, and R.J. Colton, Science 248, 454 (1990). W.G. Hoover, A.J. De Groot, C.G. Hoover, I.F. Stowers, T. Kawai, B.L. Holian, T. Boku, S. Ihara, and J. Belak, Phys. Rev. A 42, 5844 (1990). C.L. Kelchner, S. Plimpton, and J. Hamilton, Phys. Rev. B 58, 11085 (1998). T. Zhu, J. Li, K.J. Van Vliet, S. Ogata, S. Yip, and S. Suresh, J. Mech. Phys. Solids 52, 691 (2004). C. Begau, A. Hartmaier, E.P. George, and G.M. Pharr, Acta Mater. 59, 934 (2011). G. Ziegenhain, H.M. Urbassek, and A. Hartmaier, J. Appl. Phys. 107, 061807 (2010). Y. Lee, J.Y. Park, S.Y. Kim, S. Jun, and S. Im, Mech. Mater. 37, 1035 (2005). K.J. Van Vliet, J. Li, T. Zhu, S. Yip, and S. Suresh, Phys. Rev. B 67, 104105 (2003). R.E. Miller and A. Acharya, J. Mech. Phys. Solids 52, 1507 (2004). R.E. Miller and D. Rodney, J. Mech. Phys. Solids 56, 1203 (2008). A. Gouldstone, K.J. Van Vliet, and S. Suresh, Nature 411, 656 (2001). A. Gouldstone, H.-J. Koh, K.-Y. Zeng, A. Giannakopoulos, and S. Suresh, Acta Mater. 48, 2277 (2000). K.J. Van Vliet, S. Tsikata, and S. Suresh, Appl. Phys. Lett. 83, 1441 (2003). D. Feichtinger, P. Derlet, and H. Van Swygenhoven, Phys. Rev. B 67, 024113 (2003). X.-L. Ma and W. Yang, Nanotechnology 14, 1208 (2003). J.H. Yoon, S.J. Kim, and H. Jang, in Materials Science Forum (Trans Tech Publ) (2004) p. 89. A. Hasnaoui, P. Derlet, and H. Van Swygenhoven, Acta Mater. 52, 2251 (2004). H. Jang and D. Farkas, Mater. Lett. 61, 868 (2007). S.N. Medyanik and S. Shao, Comput. Mater. Sci. 45, 1129 (2009). S. Shao and S.N. Medyanik, Mech. Res. Commun. 37, 315 (2010). S. Shao and S. Medyanik, Model. Simul. Mater. Sci. Eng. 18, 055010 (2010). S. Shao, H. Zbib, I. Mastorakos, and D. Bahr, J. Appl. Phys. 112, 044307 (2012). S. Shao, H. Zbib, I. Mastorakos, and D. Bahr, J. Eng. Mater. Tech. 135, 021001 (2013). E. Njeim and D. Bahr, Scr. Mater. 62, 598 (2010). J. Zhang, T. Sun, A. Hartmaier, and Y. Yan, Comput. Mater. Sci. 59, 14 (2012). J. Zimmerman, C. Kelchner, P. Klein, J. Hamilton, and S. Foiles, Phys. Rev. Lett. 87, 165507 (2001). K. Sun, W. Shen, and L. Ma, Comput. Mater. Sci. 81, 226 (2014). J. Belak and I. Stowers, Fundamentals of Friction: Macroscopic and Microscopic Processes (Berlin: Springer, 1992), p. 511. C.-L. Liu, T.-H. Fang, and J.-F. Lin, Mater. Sci. Eng. A 452, 135 (2007). J.E. Jones, Proc. R. Soc. London A Math. Phys. Eng. Sci. 106, 463 (1924). J. Tersoff, Phys. Rev. B 37, 6991 (1988). D.W. Brenner, Phys. Rev. B 42, 9458 (1990). S. Foiles, M. Baskes, and M. Daw, Phys. Rev. B 33, 7983 (1986). G. Ziegenhain, A. Hartmaier, and H.M. Urbassek, J. Mech. Phys. Solids 57, 1514 (2009). M. Yaghoobi and G.Z. Voyiadjis, Comput. Mater. Sci. 95, 626 (2014). I. Szlufarska, R.K. Kalia, A. Nakano, and P. Vashishta, Appl. Phys. Lett. 85, 378 (2004). P. Walsh, R.K. Kalia, A. Nakano, P. Vashishta, and S. Saini, Appl. Phys. Lett. 77, 4332 (2000). P. Walsh, A. Omeltchenko, R.K. Kalia, A. Nakano, P. Vashishta, and S. Saini, Appl. Phys. Lett. 82, 118 (2003). J.A. Stewart and D. Spearot, Model. Simul. Mater. Sci. Eng. 21, 045003 (2013). V. Mollica, A. Relini, R. Rolandi, M. Bolognesi, and A. Gliozzi, Eur. Phys. J. E 3, 315 (2000). G. Pätzold, A. Linke, T. Hapke, and D. Heermann, Z. Phys. B Condens. Matter 104, 513 (1997). N. Takahashi, M. Shiojiri, and S. Enomoto, Wear 146, 107 (1991). E. Tadmor, R. Phillips, and M. Ortiz, Langmuir 12, 4529 (1996). V. Shenoy, R. Miller, E. Tadmor, D. Rodney, R. Phillips, and M. Ortiz, J. Mech. Phys. Solids 47, 611 (1999). E. Tadmor, R. Miller, R. Phillips, and M. Ortiz, J. Mater. Res. 14, 2233 (1999). R.A. Iglesias and E.P. Leiva, Acta Mater. 54, 2655 (2006). Z. Fanlin and S. Yi, Acta Mech. Solida Sin. 19, 283 (2006). J. Jin, S. Shevlin, and Z. Guo, Acta Mater. 56, 4358 (2008). G. Smith, E. Tadmor, N. Bernstein, and E. Kaxiras, Acta Mater. 49, 4089 (2001). T. Tsuru and Y. Shibutani, Phys. Rev. B 75, 035415 (2007). W.-G. Jiang, J.-J. Su, and X.-Q. Feng, Eng. Fract. Mech. 75, 4965 (2008). H. Lu and Y. Ni, Thin Solid Films 520, 4934 (2012). H. Lu, Y. Ni, J. Mei, J. Li, and H. Wang, Comput. Mater. Sci. 58, 192 (2012). W. Yu and S. Shen, Mater. Sci. Eng. A 526, 211 (2009). J. Li, Y. Ni, H. Wang, and J. Mei, Nanoscale Res. Lett. 5, 420 (2009). H. Lu, J. Li, and Y. Ni, Comput. Mater. Sci. 50, 2987 (2011). W. Yu and S. Shen, Comput. Mater. Sci. 46, 425 (2009). W. Yu and S. Shen, Eng. Fract. Mech. 77, 3329 (2010). L. Shilkrot, W.A. Curtin, and R.E. Miller, J. Mech. Phys. Solids 50, 2085 (2002). B. Devincre and M. Condat, Acta Metall. Mater. 40, 2629 (1992). H.M. Zbib, M. Rhee, and J.P. Hirth, Int. J. Mech. Sci. 40, 113 (1998). A. Arsenlis, W. Cai, M. Tang, M. Rhee, T. Oppelstrup, G. Hommes, T.G. Pierce, and V.V. Bulatov, Model. Simul. Mater. Sci. Eng. 15, 553 (2007). C. Zhou, S.B. Biner, and R. LeSar, Acta Mater. 58, 1565 (2010). C. Zhou, S. Biner, and R. LeSar, Scr. Mater. 63, 1096 (2010). C. Zhou and R. LeSar, Int. J. Plast. 30, 185 (2012). S. Huang, J. Wang, and C. Zhou, Mater. Sci. Eng. A 636, 430 (2015). M. Fivel, M. Verdier, and G. Canova, Mater. Sci. Eng. A 234, 923 (1997). M. Rathinam, R. Thillaigovindan, and P. Paramasivam, J. Mech. Sci. Technol. 23, 2652 (2009). T. Tsuru, Y. Shibutani, and Y. Kaji, Acta Mater. 58, 3096 (2010). D. Peirce, R. Asaro, and A. Needleman, Acta Metall. 30, 1087 (1982). F. Roters, P. Eisenlohr, L. Hantcherli, D.D. Tjahjanto, T.R. Bieler, and D. Raabe, Acta Mater. 58, 1152 (2010). H.-J. Chang, M. Fivel, D. Rodney, and M. Verdier, C. R. Phys. 11, 285 (2010). W.D. Nix and H. Gao, J. Mech. Phys. Solids 46, 411 (1998). S. Qu, Y. Huang, G. Pharr, and K. Hwang, Int. J. Plast. 22, 1265 (2006). T. Britton, H. Liang, F. Dunne, and A. Wilkinson, Proc. R. Soc. London A Math. Phys. Eng. Sci. 466, 695 (2010). S. Kucharski, S. Stupkiewicz, and H. Petryk, Exp. Mech. 54, 957 (2014). Y. Wang, D. Raabe, C. Klüber, and F. Roters, Acta Mater. 52, 2229 (2004). B. Eidel, Acta Mater. 59, 1761 (2011). J. Alcala, A. Barone, and M. Anglada, Acta Mater. 48, 3451 (2000). X. Qiu, Y. Huang, W. Nix, K. Hwang, and H. Gao, Acta Mater. 49, 3949 (2001). Y. Liu, S. Varghese, J. Ma, M. Yoshino, H. Lu, and R. Komanduri, Int. J. Plast. 24, 1990 (2008). N. Zaafarani, D. Raabe, R. Singh, F. Roters, and S. Zaefferer, Acta Mater. 54, 1863 (2006). M. Liu, C. Lu, K.A. Tieu, C.-T. Peng, and C. Kong, Sci. Rep. 5, 15072 (2015). Y. Liu, N. Li, S. Shao, M. Gong, J. Wang, R. McCabe, Y. Jiang, and C. Tome, Nat. Commun. 7, 11577 (2016).