Researching of the structure and properties of FCAW hardfacing based on Fe-Ti-Mo-B-C welded under low current

Antonyuk, 2007, Discontinuous coatings on cutting tools, Strength of Materials, 39, 99, 10.1007/s11223-007-0014-4 Bazaluk, 2021, Influence of heavy weight drill pipe material and drill bit manufacturing errors on stress state of steel blades, Energies, 14, 10.3390/en14144198 Buketov, 2018, Adhesive Pull and Shear Strength of Epoxy Nanocomposite Coatings Filled with Ultradispersed Diamond, Strength of Materials, 50, 425, 10.1007/s11223-018-9986-5 Coronado, 2009, The effect of welding processes on abrasive wear resistance for harfacing deposits, Tribology International, 42, 745, 10.1016/j.triboint.2008.10.012 Duryagina, 2011, Magnetometric analysis of surface layers of 12X18H10T steel after ion-beam nitriding, Metallofizika i Noveishie Tekhnologii, 33, 615 Liu, 2012, Effects of titanium additive on microstructure and wear performance of iron-based slag-free self-shielded flux-cored wire, Surface and Coatings Technology, 207, 579, 10.1016/j.surfcoat.2012.07.078 Maksymiv, 2021, Influence of the Surface Nanostructuring of 65G Steel on the Wear Resistance of the Disks of Furrow Openers of Seeding Machines, Materials Science, 56, 523, 10.1007/s11003-021-00459-9 Marinenko, 2009, Special features of structure formation in polycarbide based hard alloys, Journal of Superhard Materials, 31, 89, 10.3103/S1063457609020051 Melnick, 2020, Thermodynamic prediction of phase composition of transition metals high-entropy alloys, Metallofizika i Noveishie Tekhnologii, 42, 1387, 10.15407/mfint.42.10.1387 Pashechko, 2017, Multicriterion Assessment of Wear Resistance of Fe–Mn–C–B Eutectic Coatings Alloyed with Si, Ni, and Cr, Powder Metallurgy and Metal Ceramics, 56, 316, 10.1007/s11106-017-9899-z Popadyuk, 2019, Study of nano-containing biopolymer films therapeutic and physical-mechanical properties, Novosti Khirurgii, 27, 16, 10.18484/2305-0047.2019.1.16 Prysyazhnyuk, 2020, In situ formation of molybdenum borides at hardfacing by arc welding with flux-cored wires containing a reaction mixture of B4C/Mo, Eastern-European Journal of Enterprise Technologies, 4, 46, 10.15587/1729-4061.2020.206568 Pukas, 2020, Influence of the nano-WC content and Sintering Temperature on the Phase Composition of Hard Alloys in the System TiC-WC-VC-NiCr, Physics and Chemistry of Solid State, 21, 496, 10.15330/pcss.21.3.496-502 Ropyak, 2020, Analysis of materials and modern technologies for PDC drill bit manufacturing, Progress in Physics of Metals, 21, 274, 10.15407/ufm.21.02.274 Ropyak, L.Y., Velychkovych, A.S., Vytvytskyi, V.S., Shovkoplias, M.V., 2021. Analytical study of crosshead-Slide rail wear effect on pump rod stress state. Journal of Physics: Conference Seriesthis link is disabled 1741(1), 012039.https://doi.org/10.1088/1742-6596/1741/1/012039 Ropyak, 2020, Stressed state of laminated interference-absorption filter under local loading, Functional Materials, 27, 638 Shihab, T.A., Shlapak, L.S., Namer, N.S., Prysyazhnyuk, P.M., Ivanov, O.O., Burda, M.J., 2021. Increasing of durability of mechanical seals of oil and gas centrifugal pumps using tungsten-free cermet with Cu-Ni-Mn binder. Journal of Physics: Conference Series 1741 (1), art. no. 012031. https://doi.org/10.1088/1742-6596/1741/1/012031 Shihab, T.A., Shlapak, L.S., Namer, N.S., Prysyazhnyuk, P.M., Ivanov, O.O., Burda, M.J., 2021. Increasing of durability of mechanical seals of oil and gas centrifugal pumps using tungsten-free cermet with Cu-Ni-Mn binder. Journal of Physics: Conference Series 1741(1), art. no. 012031. https://doi.org/10.1088/1742-6596/1741/1/012031 Trembach, 2021, Effect of exothermic addition (Сuo-al) on the structure, mechanical properties and abrasive wear resistance of the deposited metal during self-shielded flux-cored arc welding, Tribology in Industry, 43, 452, 10.24874/ti.1104.05.21.07 Trembach, 2021, Application of Taguchi method and ANOVA analysis for optimization of process parameters and exothermic addition (CuO-Al) introduction in the core filler during self-shielded flux-cored arc welding, International Journal of Advanced Manufacturing Technology, 114, 1099, 10.1007/s00170-021-06869-y Vasyliev, 2016, Synthesis of deformation-induced nanocomposites on aluminium D16 alloy surface by ultrasonic impact treatment, Metallofizika i Noveishie Tekhnologii, 38, 545, 10.15407/mfint.38.04.0545 Yakym, 2020, Analysis of causes and preventing ways of early workability loss of three-cone rock bit cutters, Metallofizika i Noveishie Tekhnologii, 42, 731, 10.15407/mfint.42.05.0731