Linear and non-linear stability analyses of thin-walled beams with monosymmetric I sections

Bleich, 1952 Galambos, 1998 Salvadori, 1956, Lateral buckling of eccentrically loaded I-columns, Transactions of the ASCE, 121, 1163 Timoshenko, 1961 Vlasov VZ. Thin walled elastic beams, Moscow (French translation: Pièces longues en voiles minces). Paris: Eyrolles; 1962. Eurocode3. Design of steel structures, Part 1.1: General rules for buildings. European Committee for Standardisation, Draft Document ENV 1993-1-1, Brussels, 1992. AISC LRFD. American Institute of Steel Construction (AISC). Load and resistance factor design. Chicago: AISC; 1994. BS 5950-1. Structural use of steelwork in buildings. Code of practice for design. Rolled and welded sections. British Standards Institution, 2000. Bal′ac I, Kolekov′a Y. Critical moments. In: Iv′anyi M, editor. Stability and ductility of steel structures. Budapest: Akademiai Kiado; 2002. Gonçalves, 2004, On the application of beam-column interaction formulae to steel members with arbitrary loading and support conditions, Journal of Constructional Steel Research, 60, 433, 10.1016/S0143-974X(03)00122-6 Lim, 2003, Elastic buckling of I-beams under linear moment gradient, International Journal of Solids and Structures, 40, 5635, 10.1016/S0020-7683(03)00330-5 Mohri, 2003, Theoretical and numerical stability analyses of unrestrained, mono-symmetric thin-walled beams, Journal of Contructional Steel Research, 59, 63, 10.1016/S0143-974X(02)00007-X Greiner, 1999, Validation of design rules for member stability of European standards proposal for buckling rules, 81 Serna, 2006, Equivalent uniform moment factors for lateral–torsional buckling of steel members, Journal of Constructional Steel Research, 62, 566, 10.1016/j.jcsr.2005.09.001 Lindner, 2001, New European design concepts for beam columns subjected to compression and bending, Advances in Structural Engineering, 4, 20, 10.1260/1369433011502327 Villette, 2002, Propositions pour de nouvelles courbes de déversement, Revue Construction Métallique, 2, 17 Eurocode 3. European Committee for Standardization. EN 1993-1-1. Eurocode 3: Design of steel structures. Part 1-1: General rules and rules for buildings. Brussels, May 2005. Clark, 1958, Effect of deflection on lateral buckling, Journal of the Engineering Mechanics Division, ASCE Proceedings of the American Society of Civil Engineers, 84, 1 Clark, 1960, Lateral buckling of beams, Journal of the Structural Division, ASCE, 86, 175, 10.1061/JSDEAG.0000540 Trahair, 1973, Effect of major axis curvature on I-beam stability, Journal of the Engineering Mechanics Division, 99, 85, 10.1061/JMCEA3.0001731 Vacharajittiphan, 1974, Effect of in-plane deformation on lateral buckling, Journal of Structural Mechanics, ASCE, 3, 29, 10.1080/03601217408907255 Roberts, 1985, Instability of mono symmetric beams and cantilevers, International Journal of Mechanical Science, 27, 313, 10.1016/0020-7403(85)90021-9 Attard, 1990, A general non-dimensional equation for lateral buckling, Thin-Walled Structures, 9, 417, 10.1016/0263-8231(90)90056-5 Andrade, 2004, Lateral–torsional buckling of prismatic and tapered thin-walled open beams: assessing the influence of pre-buckling deflections, Journal of Steel and Composite Structures, 4, 281, 10.12989/scs.2004.4.4.281 Cortınez, 2006, Stability of composite thin-walled beams with shear deformability, Computers and Structures, 84, 978, 10.1016/j.compstruc.2006.02.017 Machado, 2005, Non-linear model for stability of thin-walled composite beams with shear deformation, Thin-Walled Structures, 43, 1615, 10.1016/j.tws.2005.06.008 Sapkas, 2002, Lateral–torsional buckling of composite beams, International Journal of Solids and Structures, 39, 2939, 10.1016/S0020-7683(02)00236-6 Teh, 2004, Beam element verification for 3D elastic steel frame analysis, Computers and Structures, 82, 1167, 10.1016/j.compstruc.2004.03.022 Mohri, 2008, Large torsion finite element model for thin-walled beams, Computers and Structures, 86, 671, 10.1016/j.compstruc.2007.07.007 Mohri, 2002, Lateral post-buckling analysis of thin-walled open section beams, Thin-Walled Structures, 40, 1013, 10.1016/S0263-8231(02)00043-5 Pi, 2001, Effects of approximations in analyses of beams of open thin-walled cross-section. Part I: Flexural–torsional stability, International Journal for Numerical Methods in Engineering, 51, 757, 10.1002/nme.155.abs Mohri, 2000, Déversement des poutres en I sous chargements asymétriques. ‘Lateral buckling of I beams under asymmetric loads’, Revue Construction Métallique, 2, 43 Trahair, 1993 Anderson, 1972, Stability of monosymmetric beams and cantilevers, Journal of Structural Division, ASCE, 98, 269, 10.1061/JSDEAG.0003114 Kitipornchai, 1986, Buckling of monosymmetric I-beams under moment gradient, Journal of Structural Engineering ASCE, 112, 781, 10.1061/(ASCE)0733-9445(1986)112:4(781) Mohri, 2008, A beam finite element for non-linear analyses of thin-walled elements, Thin-Walled Structures, 46, 981, 10.1016/j.tws.2008.01.028 Hibbit, Karlsson and Sorensen Inc. Abaqus standard user's manual, version 6.8. Pawtucket, RI, USA: Abaqus; 2006. Kitipornchai, 1987, Nonlinear finite element analysis of angle end tee beams-columns, Journal of the Structural Engineering, ASCE, 113, 721, 10.1061/(ASCE)0733-9445(1987)113:4(721) Saadé K, Espion B, Warzée G. Application of Prokic warping function to lateral-torsional buckling of thin walled structures. In: Loughlan J, editor. Thin-walled structures. Advances in research, design and manufacturing technology. Institute of Physics Publishing, Bristol and Philadelphia; 2004. p. 827-34. Woolcock, 1974, Post-buckling behavior of determinate beams, Journal of the Engineering Mechanics Division, ASCE, 100, 151, 10.1061/JMCEA3.0001867 Andeson, 1972, Stability of monosymmetric beams and cantilevers, Journal of Structural Division, ASCE, 98, 2647 Mohri, 2008, lateral buckling of thin-walled beam-column elements under combined axial and bending loads, Thin-Walled Structures, 46, 290, 10.1016/j.tws.2007.07.017