Ni/CeO2-thin ceramic layer depositions on ceramic monoliths for syngas production by Oxy Steam Reforming of biogas

Fuel Processing Technology - Tập 149 - Trang 40-48 - 2016
Riccardo Balzarotti1, Cristina Italiano2, Lidia Pino2, Cinzia Cristiani1, Antonio Vita2
1Politecnico di Milano, Dipartimento di Chimica, Materiali e Ingegneria Chimica “G. Natta”, Piazza Leonardo da Vinci 32, 20133 Milano, Italy
2Institute CNR-ITAE, Via Salita S. Lucia sopra Contesse n. 5, 98126 S. Lucia, Messina, Italy

Tài liệu tham khảo

Andrews, 2012, Re-envisioning the role of hydrogen in a sustainable energy economy, Int. J. Hydrog. Energy, 37, 1184, 10.1016/j.ijhydene.2011.09.137 Vita, 2015, Influence of Ce-precursor and fuel on structure and catalytic activity of combustion synthesized Ni/CeO2 catalysts for biogas oxidative steam reforming, Mater. Chem. Phys., 163, 337, 10.1016/j.matchemphys.2015.07.048 Kleijn, 2010, Resource constraints in a hydrogen economy based on renewable energy sources: an exploration, Renew. Sust. Energ. Rev., 14, 2784, 10.1016/j.rser.2010.07.066 Avraam, 2010, Int. J. Hydrog. Energy, 35, 9818, 10.1016/j.ijhydene.2010.05.106 Araki, 2009, Durability of a Ni based monolithic catalyst in the autothermal reforming of biogas, Int. J. Hydrog. Energy, 34, 4727, 10.1016/j.ijhydene.2009.03.041 Braga, 2013, Hydrogen production by biogas steam reforming: a technical, economic and ecological analysis, Renew. Sust. Energ. Rev., 28, 6166, 10.1016/j.rser.2013.07.060 Ashrafi, 2008, Experimental study of model biogas catalytic steam reforming: 1. Thermodynamic optimization, Energy Fuel, 22, 4182, 10.1021/ef800081j Maney, 2005, Carbon dioxide emissions, climate change, and the clean air act: an analysis of whether carbon dioxide should be listed as a criteria pollutant, N. Y. Univ. Environ. Law J., 298 Xu, 2009, Biogas reforming for hydrogen production over nickel and cobalt bimetallic catalysts, Int. J. Hydrog. Energy, 34, 6646, 10.1016/j.ijhydene.2009.06.038 Izquierdo, 2012, Biogas steam reforming and oxidative reforming processes for synthesis gas and hydrogen production in conventional and microreactor reaction systems, Int. J. Hydrog. Energy, 37, 13829, 10.1016/j.ijhydene.2012.04.077 Izquierdo, 2013, Trireforming: a new biogas process for synthesis gas and hydrogen production, Int. J. Hydrog. Energy, 38, 7623, 10.1016/j.ijhydene.2012.09.107 Jun, 2007, Structure and catalytic properties of ceria based nickel catalysts for CO2 reforming of methane, Catal. Surv. Jpn., 11, 97, 10.1007/s10563-007-9026-0 Liso, 2011, Performance comparison between partial oxidation and methane steam reforming processes for solid oxide fuel cell (SOFC) micro combined heat and power (CHP) system, Energy, 36, 4216, 10.1016/j.energy.2011.04.022 Vita, 2015, Syngas production by methane oxy-steam reforming on Me/CeO2 (Me=Rh, Pt, Ni) catalyst lined on cordierite monoliths, Appl. Catal. B, 162, 551, 10.1016/j.apcatb.2014.07.028 Li, 2015, Effect of the addition of Ce and Zr on the structure and performances of Ni-Mo/CeZr-MgAl(O) catalysts for CH4-CO2 reforming, Fuel Process. Technol., 140, 39, 10.1016/j.fuproc.2015.08.020 Asencios, 2013, Oxidative reforming of model biogas over NiO-Y2O3-ZrO2 catalysts, Appl. Catal. B, 132-133, 1, 10.1016/j.apcatb.2012.10.032 Jun, 2007, Structure and catalytic properties of ceria based nickel catalysts for CO2 reforming of methane, Catal. Surv. Jpn., 11, 97, 10.1007/s10563-007-9026-0 Pino, 2003, A comparative study of Pt/CeO2 catalysts for catalytic partial oxidation of methane to syngas for application in fuel cell electric vehicles, Appl. Catal. A, 243, 135, 10.1016/S0926-860X(02)00542-2 Pino, 2006, Performance of Pt/CeO2 catalyst for propane oxidative steam reforming, Appl. Catal. A, 306, 68, 10.1016/j.apcata.2006.03.031 Bereketidou, 2012, Biogas reforming for syngas production over nickel supported on ceria-alumina catalysts, Catal. Today, 195, 93, 10.1016/j.cattod.2012.07.006 Meshkani, 2011, Ni catalysts supported on nanocrystalline magnesium oxide for syngas production by CO2 reforming of CH4, J. Nat. Gas Chem., 20, 198, 10.1016/S1003-9953(10)60169-7 Meshkani, 2011, Nickel catalyst supported on magnesium oxide with high surface area and plate-like shape: a highly stable and active catalyst in methane reforming with carbon dioxide, Catal. Commun., 12, 1046, 10.1016/j.catcom.2011.03.013 Toebes, 2002, Impact of the structure and reactivity of nickel particles on the catalytic growth of carbon nanofibers, Catal. Today, 76, 33, 10.1016/S0920-5861(02)00209-2 Italiano, 2015, Bio-hydrogen production by oxidative steam reforming of biogas over nanocrystalline Ni/CeO2 catalysts, Int. J. Hydrog. Energy, 40, 11823, 10.1016/j.ijhydene.2015.04.146 Vita, 2014, Methane oxy-steam reforming reaction: performances of Ru/γ-Al2O3 catalysts loaded on structured cordierite monoliths, Int. J. Hydrog. Energy, 39, 18592, 10.1016/j.ijhydene.2014.03.114 Sadykova, 2015, Structured catalysts for steam/autothermal reforming of biofuels on heat-conducting substrates: design and performance, Catal. Today, 251, 19, 10.1016/j.cattod.2014.10.045 Krumpelt, 2002, Fuel processing for fuel cell systems in transportation and portable power applications, Catal. Today, 77, 3, 10.1016/S0920-5861(02)00230-4 Akbari, 2011, A micro reactor modeling, analysis and optimization for methane autothermal reforming in fuel cell applications, Chem. Eng. J., 166, 1116, 10.1016/j.cej.2010.12.044 Sanz, 2013, 201 Banús, 2013, Catalytic coating synthesized onto cordierite monolith walls. Its application to diesel soot combustion, Appl. Catal. B, 132-133, 479, 10.1016/j.apcatb.2012.12.020 Avila, 2005, Monolithic reactors for environmental applications: a review on preparation technologies, Chem. Eng. J., 109, 11, 10.1016/j.cej.2005.02.025 Meille, 2006, Review on methods to deposit catalysts on structured surfaces, Appl. Catal. A, 315, 1, 10.1016/j.apcata.2006.08.031 Aegerter, 2004 Montebelli, 2014, Methods for the catalytic activation of metallic structured substrates, Catal. Sci. Technol., 4, 2846, 10.1039/C4CY00179F Middleman, 1977 Brinker, 1990 Valentini, 2001, The deposition of γ-Al2O3 layers on ceramic and metallic supports for the preparation of structured catalysts, Catal. Today, 69, 307, 10.1016/S0920-5861(01)00383-2 Montebelli, 2014, Washcoating and chemical testing of a commercial Cu/ZnO/Al2O3 catalyst for the methanol synthesis over copper open-cell foams, Appl. Catal. A, 481, 96, 10.1016/j.apcata.2014.05.005 Meille, 2005, Deposition of γ-Al2O3 layers on structured supports for the design of new catalytic reactors, Appl. Catal. A, 286, 232, 10.1016/j.apcata.2005.03.028 Chen, 2013, Preparation of mesoporous CeO2 with high thermal stability by ammonium carbonate hydrolysis method, Chinese J. Inorg. Chem., 29, 2231 Colussi, 2012, The influence of ceria and other rare earth promoters on palladium-based methane combustion catalysts, Catal. Today, 180, 124, 10.1016/j.cattod.2011.03.021 Cristiani, 2012, Activation of metallic open-cell foams via washcoat deposition of Ni/MgAl2O4 catalysts for steam reforming reaction, Catal. Today, 197, 256, 10.1016/j.cattod.2012.09.003 Pino, 2011, Hydrogen production by methane tri-reforming process over Ni-ceria catalysts: effect of La-doping, Appl Catal B, 104, 64, 10.1016/j.apcatb.2011.02.027 Menegazzo, 2012, Optimization of bimetallic dry reforming catalysts by temperature programmed reaction, Appl. Catal. A, 439-440, 80, 10.1016/j.apcata.2012.06.041 Kugai, 2005, Low-temperature reforming of ethanol over CeO2-supported Ni-Rh bimetallic catalysts for hydrogen production, Catal. Lett., 101, 255, 10.1007/s10562-005-4901-7 Hou, 2015, Hydrogen production from ethanol steam reforming over Rh/CeO2 catalyst, Catal. Commun., 58, 137, 10.1016/j.catcom.2014.09.020 Marrero-Jerez, 2014, TPR-TPD-TPO studies on CGO/NiO and CGO/CuO ceramics obtained from freeze-dried precursors, Ceram. Int., 40, 3469, 10.1016/j.ceramint.2013.09.083 Patcas, 2007, CO oxidation over structured carriers: a comparison of ceramic foams, honeycombs and beads, Chem. Eng. Sci., 62, 3984, 10.1016/j.ces.2007.04.039 Williams, 2001, Monolith structures, materials, properties and uses, Catal. Today, 69, 3, 10.1016/S0920-5861(01)00348-0 Cybulski, 1994, Monoliths in heterogeneous catalysis, Catal. Rev. Sci. Eng., 36, 179, 10.1080/01614949408013925 Tomishige, 2002, Effective heat supply from combustion to reforming in methane reforming with CO2 and O2: comparison between Ni and Pt catalysts, Appl. Catal. A, 233, 35, 10.1016/S0926-860X(02)00131-X Tomishige, 2004, Effect of oxygen addition to steam and dry reforming of methane on bed temperature profile over Pt and Ni catalysts, Fuel Process. Technol., 85, 1103, 10.1016/j.fuproc.2003.10.014 Effendi, 2002, Steam reforming of a clean model biogas over Ni/Al2O3 in fluidized- and fixed-bed reactors, Catal. Today, 77, 181, 10.1016/S0920-5861(02)00244-4 Sun, 2010, Effect of O2 and H2O on the tri-reforming of the simulated biogas to syngas over Ni-based SBA-15 catalysts, J. Nat. Gas Chem., 19, 369, 10.1016/S1003-9953(09)60096-7 Goula, 2015, Nickel on alumina catalysts for the production of hydrogen rich mixtures via the biogas dry reforming reaction: influence of the synthesis method, Int. J. Hydrog. Energy, 40, 9183, 10.1016/j.ijhydene.2015.05.129 Asencios, 2014, Oxidative-reforming of model biogas over NiO/Al2O3 catalysts: the influence of the variation of support synthesis conditions, Appl. Surf. Sci., 317, 350, 10.1016/j.apsusc.2014.08.058 Luisetto, 2015, Ni/CeO2-Al2O3 catalysts for the dry reforming of methane: the effect of CeAlO3 content and nickel crystallite size on catalytic activity and coke resistance, Appl. Catal. A, 500, 12, 10.1016/j.apcata.2015.05.004 Christensen, 2006, Effect of supports and Ni crystal size on carbon formation and sintering during steam methane reforming, Appl. Catal. A, 314, 9, 10.1016/j.apcata.2006.07.028