Experimental and numerical study of precast posttensioned walls with yielding-based and friction-based energy dissipation

Kurama, 2018, Seismic-resistant precast concrete structures: state of the art, J Struct Eng, 144, 03118001, 10.1061/(ASCE)ST.1943-541X.0001972 Brunesi, 2019, Cyclic tensile testing of a three-way panel connection for precast wall-slab-wall structures, Struct Concrete, 20, 1307, 10.1002/suco.201800280 Brunesi, 2018, Cyclic testing of a full-scale two-storey reinforced precast concrete wall-slab-wall structure, Bull Earthq Eng, 16, 5309, 10.1007/s10518-018-0359-z Brunesi, 2018, Cyclic testing and analysis of a full-scale cast-in-place reinforced concrete wall-slab-wall structure, Bull Earthq Eng, 16, 4761, 10.1007/s10518-018-0374-0 Brunesi, 2017, Experimental and numerical investigation of the seismic response of precast wall connections, Bull Earthq Eng, 15, 5511, 10.1007/s10518-017-0166-y Soudki, 1995, Horizontal connections for precast concrete shear walls subjected to cyclic deformations. I: mild steel connections, PCI J, 40, 78, 10.15554/pcij.07011995.78.96 Chen, 2013, Test on seismic performance of precast shear wall with reinforcements grouted in holes and spliced indirectly in horizontal connections, J Harbin Inst Technol, 45, 83 Zhi, 2017, Quasi-static test and strut-and-tie modeling of precast concrete shear walls with grouted lap-spliced connections, Constr Build Mater, 150, 190, 10.1016/j.conbuildmat.2017.05.183 Seifi, 2016, Panel connection details in existing New Zealand precast concrete buildings, Bull N Z Soc Earthquake Eng, 49, 190, 10.5459/bnzsee.49.2.190-199 Seifi P, Henry RS, Ingham J. In-plane testing of precast concrete walls with grouted connections. In: 16th World Conf in Earthquake Engineering. Tokyo: International Association of Earthquake Engineering; 2017. ACI. Design recommendations for precast concrete structures. Farmington Hills, MI: ACI 550R-96; 2001. CAE. Guidelines for the use of structural precast concrete in buildings. Christchurch, New Zealand, 1999. ACI. Acceptance criteria for special unbonded post-tensioned precast structural walls based on validation testing and commentary. ACI ITG-5.1-07. Detroit; 2007. ACI. Requirements for design of a special unbonded post-tensioned precast shear wall satisfying ACI ITG-5.1 and commentary: ACI ITG 5.2-09. Farmington Hills, MI; 2009. Priestley, 1991, Overview of PRESSS research program, PCI J, 36, 50, 10.15554/pcij.07011991.50.57 Kurama, 2005, Seismic design of partially post-tensioned precast concrete walls, PCI J, 50, 100, 10.15554/pcij.07012005.100.125 Kurama, 1999, Lateral load behavior and seismic design of unbonded post-tensioned precast concrete walls, ACI Struct J, 96, 622 Holden, 2003, Seismic performance of precast reinforced and prestressed concrete walls, J Struct Eng, 129, 286, 10.1061/(ASCE)0733-9445(2003)129:3(286) Perez, 2007, Analytical and experimental lateral load behavior of unbonded posttensioned precast concrete walls, J Struct Eng, 133, 1531, 10.1061/(ASCE)0733-9445(2007)133:11(1531) Perez, 2013, Experimental lateral load response of unbonded post-tensioned precast concrete walls, ACI Struct J, 110, 1045 Belleri, 2014, Dynamic behavior of rocking and hybrid cantilever walls in a precast concrete building, ACI Struct J, 111, 661, 10.14359/51686778 Rahman, 2000 Restrepo, 2007, Seismic performance of self-centering structural walls incorporating energy dissipators, J Struct Eng, 133, 1560, 10.1061/(ASCE)0733-9445(2007)133:11(1560) Smith, 2015, Perforated hybrid precast shear walls for seismic regions, ACI Struct J, 112, 359, 10.14359/51687410 Smith, 2014, Seismic design guidelines for solid and perforated hybrid precast concrete shear walls, PCI J, Summer, 43, 10.15554/pcij.06012014.43.59 Gavridou, 2017, Shake-table test of a full-scale 4-story precast concrete building. I: overview and experimental results, J Struct Eng, 143, 04017034, 10.1061/(ASCE)ST.1943-541X.0001755 Marriott SP, Bull D, Palermo A. Dynamic testing of precast, post-tensioned rocking wall systems with alternative dissipating solutions. Bull N Z Soc Earthquake Eng 2008; 41(2): 90–103. ABAQUS, User’s Manual, Version 6.13, ABAQUS, Inc. Providence, RI; 2013. Cheng, 2007 Chen, 2015, Finite element modeling of debonding failures in FRP-strengthened RC beams: a dynamic approach, Comput Struct, 158, 167, 10.1016/j.compstruc.2015.05.023 Chen, 2011, Finite-element modeling of intermediate crack debonding in FRP-plated RC beams, J Composite Constr, 15, 339, 10.1061/(ASCE)CC.1943-5614.0000157 Li, 2018, Finite-element analysis and strength model for IC debonding in FRP-strengthened RC beams, J Composite Constr, 22, 04018030, 10.1061/(ASCE)CC.1943-5614.0000863 MOHURD. Technical Specification for Concrete Structures of Tall Building. JGJ 3-2010. Beijing: Ministry of Housing and Urban‐Rural Development of the People's Republic of China; 2010.