Thermochemical energy storage performance of papermaking soda residue during CaO-CaCO3 cycles

Kong, 2022, Use of hydrated cement pastes (HCP) as a CO2 sponge, J. CO2 Util., 55, 10.1016/j.jcou.2021.101804 Tiwary, 2022, Theoretical approaches in hot CO2 capture using modified CaO-based sorbents: review, J. CO2 Util., 57, 10.1016/j.jcou.2021.101875 Carrillo, 2019, Solar energy on demand: a review on high temperature thermochemical heat storage systems and materials, Chem. Rev., 119, 4777, 10.1021/acs.chemrev.8b00315 Hall, 1979, Thermal energy storage for electric utility applications, Trans. Am. Nucl. Soc., 32, 7 She, 2017, Enhancement of roundtrip efficiency of liquid air energy storage through effective utilization of heat of compression, Appl. Energy, 206, 1632, 10.1016/j.apenergy.2017.09.102 Li, 2019, Carbonate salt based composite phase change materials for medium and high temperature thermal energy storage: a microstructural study, Sol. Energy Mater. Sol. Cells, 196, 25, 10.1016/j.solmat.2019.03.035 Bell, 2019, Corrosion mechanisms in molten salt thermal energy storage for concentrating solar power, Renew. Sustain. Energy Rev., 114, 10.1016/j.rser.2019.109328 Parrado, 2016, 2050 LCOE improvement using new molten salts for thermal energy storage in CSP plants, Renew. Sustain. Energy Rev., 57, 505, 10.1016/j.rser.2015.12.148 Wu, 2018, A review on high-temperature thermochemical energy storage based on metal oxides redox cycle, Energy Convers. Manag., 168, 421, 10.1016/j.enconman.2018.05.017 Gonzalez, 2019, Graphitization as efficient inhibitor of the carbon steel corrosion by molten binary nitrate salt for thermal energy storage at concentrated solar power, Sol. Energy Mater. Sol. Cells, 203, 10.1016/j.solmat.2019.110172 Chirino, 2019, Parametric study of cascade latent heat thermal energy storage (CLHTES) system in concentrated solar power (CSP) plants, J. Energy Inst., 92, 653, 10.1016/j.joei.2018.03.007 Ortiz, 2017, Power cycles integration in concentrated solar power plants with energy storage based on calcium looping, Energy Convers. Manag., 149, 815, 10.1016/j.enconman.2017.03.029 Ortiz, 2018, Process integration of Calcium-Looping thermochemical energy storage system in concentrating solar power plants, Energy, 155, 535, 10.1016/j.energy.2018.04.180 Valverde, 2018, The Ca-looping process for CO2 capture and energy storage: role of nanoparticle technology, J. Nanopart. Res., 20, 1, 10.1007/s11051-017-4092-3 Benitez-Guerrero, 2017, Large-scale high-temperature solar energy storage using natural minerals, Sol. Energy Mater. Sol. Cells, 168, 14, 10.1016/j.solmat.2017.04.013 Benitez-Guerrero, 2017, Multicycle activity of natural CaCO3 minerals for thermochemical energy storage in concentrated solar power plants, Sol. Energy, 153, 188, 10.1016/j.solener.2017.05.068 Sarrion, 2016, On the multicycle activity of natural limestone/dolomite for thermochemical energy storage of concentrated solar power, Energy Technol., 4, 1013, 10.1002/ente.201600068 Donat, 2018, A critical assessment of the testing conditions of CaO-based CO2 sorbents, Chem. Eng. J., 336, 544, 10.1016/j.cej.2017.12.050 Azimi, 2019, Multicycle CO2 capture activity and fluidizability of Al-based synthesized CaO sorbents, Chem. Eng. J., 358, 679, 10.1016/j.cej.2018.10.061 Blamey, 2010, The calcium looping cycle for large-scale CO2 capture, Prog. Energy Combust. Sci., 36, 260, 10.1016/j.pecs.2009.10.001 Valverde, 2016, Reduction of calcination temperature in the calcium looping process for CO2 capture by using helium: in situ XRD analysis, ACS Sustain. Chem. Eng., 4, 7090, 10.1021/acssuschemeng.6b01966 Chacartegui, 2016, Thermochemical energy storage of concentrated solar power by integration of the calcium looping process and a CO2 power cycle, Appl. Energy, 173, 589, 10.1016/j.apenergy.2016.04.053 Naeem, 2018, Optimization of the structural characteristics of CaO and its effective stabilization yield high-capacity CO2 sorbents, Nat. Commun., 9, 4317, 10.1038/s41467-018-04794-5 Ortiz, 2017, Power cycles integration in concentrated solar power plants with energy storage based on calcium looping, Energy Convers. Manag., 149, 815, 10.1016/j.enconman.2017.03.029 Alovisio, 2017, Optimizing the CSP-calcium looping integration for thermochemical energy storage, Energy Convers. Manag., 136, 85, 10.1016/j.enconman.2016.12.093 Medina-Carrasco, 2022, The calcium looping process for energy storage: Insights from in situ XRD analysis, Chem. Eng. J., 429, 10.1016/j.cej.2021.132244 Chen, 2019, Accurate control of cage-Like CaO hollow microspheres for enhanced CO2 capture in calcium looping via a template-assisted synthesis approach, Environ. Sci. Technol., 53, 2249, 10.1021/acs.est.8b06138 Chen, 2020, Review on the development of sorbents for calcium looping, Energy Fuel, 34, 7806, 10.1021/acs.energyfuels.0c00682 Tian, 2019, Calcium-looping reforming of methane realizes in situ CO2 utilization with improved energy efficiency, Sci. Adv., 5, 10.1126/sciadv.aav5077 Sarrión, 2018, Role of calcium looping conditions on the performance of natural and synthetic Ca-based materials for energy storage, J. CO2 Util., 28, 374, 10.1016/j.jcou.2018.10.018 Jiang, 2022, Research process on solid sorbents for CO2 capture, Clean Coal Technol., 28, 45 Sun, 2021, Study on sulfation reaction characteristics of different calcium-based sorbents after CO2 capture. Clean Coal, Technology, 27, 180 Prasad, 2019, A critical review of high-temperature reversible thermochemical energy storage systems, Appl. Energy, 254 Jin, 2021, Sawdust wastes-derived porous carbons for CO2 adsorption. Part 1. Optimization preparation via orthogonal experiment, Exp. Sep. Purif. Technol., 276 Luo, 2021, Effect of different organic compounds on the preparation of CaO-based CO2 sorbents derived from wet mixing combustion synthesis, Chin. J. Chem. Eng., 36, 157, 10.1016/j.cjche.2020.09.039 Da, 2020, Calcium-based composites for direct solar-thermal conversion and thermochemical energy storage, Chem. Eng. J., 382, 815, 10.1016/j.cej.2019.122815 Obermeier, 2017, Material development and assessment of an energy storage concept based on the CaO-looping process, Sol. Energy, 150, 298, 10.1016/j.solener.2017.04.058 Ma, 2019, Research progress of CO2 capture with the assist CaO-based energy storage materials at coal-fired power station, Clean. Coal Technol., 25, 1 Benitez-Guerrero, 2018, Calcium-Looping performance of mechanically modified Al2O3-CaO composites for energy storage and CO2 capture, Chem. Eng. J., 334, 2343, 10.1016/j.cej.2017.11.183 Sanchez-Jimenez, 2019, High-performance and low-cost macroporous calcium oxide based materials for thermochemical energy storage in concentrated solar power plants, Appl. Energy, 235, 543, 10.1016/j.apenergy.2018.10.131 Pi, 2019, Investigation of Y2O3/MgO-modified extrusion-spheronized CaO-based pellets for high‐temperature CO2 capture, Asia Pac. J. Chem. Eng., 14, 2366, 10.1002/apj.2366 Benitez-Guerrero, 2018, Low-cost Ca-based composites synthesized by biotemplate method for thermochemical energy storage of concentrated solar power, Appl. Energy, 210, 108, 10.1016/j.apenergy.2017.10.109 Sun, 2020, Thermochemical energy storage performance of Al2O3/CeO2 co-doped CaO-based material under high carbonation pressure, Appl. Energy, 263, 650, 10.1016/j.apenergy.2020.114650 Xu, 2021, Reaction performance of CaCO3/CaO thermochemical energy storage with TiO2 dopant and experimental study in a fixed-bed reactor, Energy, 236, 451, 10.1016/j.energy.2021.121451 Sun, 2019, Mode investigation of CO2 sorption enhancement for titanium dioxide decorated CaO-based pellets, Fuel, 256, 10.1016/j.fuel.2019.116009 Luo, 2010, Development and performance of CaO/La2O3 sorbents during calcium looping cycles for CO2 capture, Ind. Eng. Chem. Res., 49, 11778, 10.1021/ie1012745 Yasipourtehrani, 2020, Development of robust CaO-based sorbents from blast furnace slag for calcium looping CO2 capture, Chem. Eng. J., 387, 10.1016/j.cej.2020.124140 Tian, 2015, Synthesis of highly efficient CaO-based, self-stabilizing CO2 sorbents via structure-reforming of steel slag, Environ. Sci. Technol., 49, 7463, 10.1021/acs.est.5b00244 Sun, 2019, Plastic/rubber waste-templated carbide slag pellets for regenerable CO2 capture at elevated temperature, Appl. Energy, 242, 919, 10.1016/j.apenergy.2019.03.165 Ortega-Fernández, 2015, Thermophysical characterization of a by-product from the steel industry to be used as a sustainable and low-cost thermal energy storage material, Energy, 89, 601, 10.1016/j.energy.2015.05.153 Sun, 2019, Thermochemical energy storage performances of Ca-based natural and waste materials under high pressure during CaO/CaCO3 cycles, Energy Convers. Manag., 197, 885, 10.1016/j.enconman.2019.111885 Hu, 2016, Structurally improved CaO-based sorbent by organic acids for high temperature CO2 capture, Fuel, 167, 17, 10.1016/j.fuel.2015.11.048 Ridha, 2013, Assessment of limestone treatment with organic acids for CO2 capture in Ca-looping cycles, Fuel Process. Technol., 116, 284, 10.1016/j.fuproc.2013.07.007 Perejon, 2017, Large-scale storage of concentrated solar power from industrial waste, ACS Sustain. Chem. Eng., 5, 2265, 10.1021/acssuschemeng.6b02576 Valverde, 2017, Calcium-Looping performance of steel and blast furnace slags for thermochemical energy storage in concentrated solar power plants, J. CO2 Util., 22, 143, 10.1016/j.jcou.2017.09.021 Sun, 2013, Utilization of lime mud from paper mill as CO2 sorbent in calcium looping process, Chem. Eng. J., 221, 124, 10.1016/j.cej.2013.01.068 Lin, 2020, Treatment of lime mud from papermaking process and its preparation with PVC composites, Chem. Eng. Equip., 6, 8 Sun, 2020, Kinetic analysis about the CO2 capture capacity of lime mud from paper mill in calcium looping process, Energy Sci. Eng., 8, 4014, 10.1002/ese3.792 Tang, 2003, Comprehensive utilization of white clay for papermaking in China, Int. Papermak., 22, 53 Han, 2022, Relevant influence of alkali carbonate doping on the thermochemical energy storage of Ca-based natural minerals during CaO/CaCO3 cycles, Renew. Energy, 181, 267, 10.1016/j.renene.2021.09.021 Chen, 2010, CO2 capture performance of calcium-based sorbents in a pressurized carbonation/calcination loop, Energy Fuels, 24, 5751, 10.1021/ef100565d Alvarez, 2005, Determination of the critical product layer thickness in the reaction of CaO with CO2, Ind. Eng. Chem. Res., 44, 5608, 10.1021/ie050305s