Biogas-fueled flame fuel cell for micro-combined heat and power system

Energy Conversion and Management - Tập 148 - Trang 701-707 - 2017
Hongyu Zeng1, Yuqing Wang1, Yixiang Shi1, Ningsheng Cai1
1Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Department of Thermal Engineering, Tsinghua University, Beijing 100084, China

Tài liệu tham khảo

Goula, 2006, Catalytic and electrocatalytic behavior of Ni-based cermet anodes under internal dry reforming of CH4+CO2 mixtures in SOFCs, Solid State Ionics, 177, 2119, 10.1016/j.ssi.2006.03.040 Xuan, 2009, A review of biomass-derived fuel processors for fuel cell systems, Renew Sustain Energy Rev, 13, 1301, 10.1016/j.rser.2008.09.027 Piroonlerkgul, 2008, Selection of appropriate fuel processor for biogas-fuelled SOFC system, Chem Eng J, 140, 341, 10.1016/j.cej.2007.10.007 Membrez, 2004, Biogas as a fuel source for SOFC co-generators, J Power Sources, 127, 300 Hawkes, 2009, Fuel cells for micro-combined heat and power generation, Energy Environ Sci, 2, 729, 10.1039/b902222h Ni, 2013, Modeling and parametric simulations of solid oxide fuel cells with methane carbon dioxide reforming, Energy Convers Manage, 70, 116, 10.1016/j.enconman.2013.02.008 Komiyama M, Misonou T, Takeuchi S, et al. Biogas as a reproducible energy source: Its steam reforming for electricity generation and for farm machine fuel[C]//International Congress Series. Elsevier; 2006. 1293. p. 234–237. Van Herle, 2004, Process flow model of solid oxide fuel cell system supplied with sewage biogas, J Power Sources, 131, 127, 10.1016/j.jpowsour.2004.01.013 Farhad, 2010, Performance evaluation of different configurations of biogas-fuelled SOFC micro-CHP systems for residential applications, Int J Hydrogen Energy, 35, 3758, 10.1016/j.ijhydene.2010.01.052 Maréchal, 2003, Energy balance model of a SOFC cogenerator operated with biogas, J Power Sources, 118, 375 Tjaden, 2014, Small-scale biogas-SOFC plant: technical analysis and assessment of different fuel reforming options, Energy Fuels, 28, 4216, 10.1021/ef500212j Galvagno, 2013, Biogas as hydrogen source for fuel cell applications, Int J Hydrogen Energy, 38, 3913, 10.1016/j.ijhydene.2013.01.083 Chiodo, 2015, Biogas reforming process investigation for SOFC application, Energy Convers Manage, 98, 252, 10.1016/j.enconman.2015.03.113 Alves, 2013, Overview of hydrogen production technologies from biogas and the applications in fuel cells, Int J Hydrogen Energy, 38, 5215, 10.1016/j.ijhydene.2013.02.057 Staniforth, 2000, Cannock landfill gas powering a small tubular solid oxide fuel cell—a case study, J Power Sources, 86, 401, 10.1016/S0378-7753(99)00417-6 Milcarek, 2016, Micro-tubular flame-assisted fuel cells for micro-combined heat and power systems, J Power Sources, 306, 148, 10.1016/j.jpowsour.2015.12.018 Walther, 2011, Advances and challenges in the development of power-generation systems at small scales, Prog Energy Combust Sci, 37, 583, 10.1016/j.pecs.2010.12.002 Milcarek, 2016, Performance variation with SDC buffer layer thickness, Int J Hydrogen Energy, 41, 9500, 10.1016/j.ijhydene.2016.04.113 Wang, 2016, Power and heat co-generation by micro-tubular flame fuel cell on a porous media burner, Energy, 109, 117, 10.1016/j.energy.2016.04.095 Milcarek, 2016, Micro-tubular flame-assisted fuel cells running methane, Int J Hydrogen Energy, 41, 20670, 10.1016/j.ijhydene.2016.08.155 Wang, 2016, Start-up and operation characteristics of a flame fuel cell unit, Appl Energy, 178, 415, 10.1016/j.apenergy.2016.06.067 Wang, 2015, Performance characteristics of a micro-tubular solid oxide fuel cell operated with a fuel-rich methane flame, ECS Trans, 68, 2237, 10.1149/06801.2237ecst Wang, 2013, Integration of solid oxide fuel cells with multi-element diffusion flame burners, J Electrochem Soc, 160, F1241, 10.1149/2.051311jes Wang, 2014, Experimental characterization of a direct methane flame solid oxide fuel cell power generation unit, J Electrochem Soc, 161, F1348, 10.1149/2.0381414jes Milcarek R, Wang K, Falkenstein-Smith R, et al. Flame-Assisted Fuel Cell Operating With Methane for Combined Heating and Micro Power[C]//ASME 2015 13th International Conference on Fuel Cell Science, Engineering and Technology collocated with the ASME 2015 Power Conference, the ASME 2015 9th International Conference on Energy Sustainability, and the ASME 2015 Nuclear Forum. American Society of Mechanical Engineers; 2015: V001T03A003-V001T03A003. Wang, 2015, Flame-assisted fuel cells running methane, Int J Hydrogen Energy, 40, 4659, 10.1016/j.ijhydene.2015.01.128 Falkenstein-Smith R, Wang K, Milcarek R, et al. Integrated Anaerobic Digester and Fuel Cell Power Generation System for Community Use[C]//ASME 2015 13th International Conference on Fuel Cell Science, Engineering and Technology collocated with the ASME 2015 Power Conference, the ASME 2015 9th International Conference on Energy Sustainability, and the ASME 2015 Nuclear Forum. American Society of Mechanical Engineers; 2015: V001T03A004-V001T03A004. Horiuchi, 2004, Electrochemical power generation directly from combustion flame of gases, liquids, and solids, J Electrochem Soc, 151, A1402, 10.1149/1.1778168 Wang, 2011, High performance direct flame fuel cell using a propane flame, Proc Combust Inst, 33, 3431, 10.1016/j.proci.2010.07.047 Sun, 2010, Coking-free direct-methanol-flame fuel cell with traditional nickel–cermet anode, Int J Hydrogen Energy, 35, 7971, 10.1016/j.ijhydene.2010.05.048 Kronemayer, 2007, A direct-flame solid oxide fuel cell (DFFC) operated on methane, propane, and butane, J Power Sources, 166, 120, 10.1016/j.jpowsour.2006.12.074 Shapovalova, 2012, Syngas and hydrogen production from biogas in volumetric (3D) matrix reformers, Int J Hydrogen Energy, 37, 14040, 10.1016/j.ijhydene.2012.07.002 Al-Hamamre, 2010, The use of inert porous media based reactors for hydrogen production, Int J Hydrogen Energy, 35, 1971, 10.1016/j.ijhydene.2009.11.079 Cao, 2017, Recent advances in carbon-air fuel cells, Energy Environ Sci, 10, 460, 10.1039/C6EE03462D Ye, 2014, Micro-tubular solid oxide fuel cells and their stacks running on direct ethanol fuels, J Electrochem Soc, 161, F894, 10.1149/2.0591409jes Maréchal, 2004, Process flow model of solid oxide fuel cell system supplied with sewage biogas, J Power Sources, 131, 127 Chen, 2011, Evaluation of carbon deposition behavior on the nickel/yttrium-stabilized zirconia anode-supported fuel cell fueled with simulated syngas, J Power Sources, 196, 2461, 10.1016/j.jpowsour.2010.11.095 Sumi, 2011, Effect of carbon deposition by carbon monoxide disproportionation on electrochemical characteristics at low temperature operation for solid oxide fuel cells, J Power Sources, 196, 4451, 10.1016/j.jpowsour.2011.01.061 Wang, 2008, A high-performance no-chamber fuel cell operated on ethanol flame, J Power Sources, 177, 33, 10.1016/j.jpowsour.2007.11.004 Patel, 2012, Impact of cofiring ceria in ni/ysz sofc anodes for operation with syngas and n-butane, J Fuel Cell Sci Technol, 9, 041002, 10.1115/1.4006823 Hui, 2002, Electrical properties of yttrium-doped strontium titanate under reducing conditions, J Electrochem Soc, 149, J1, 10.1149/1.1420706