Numerical method for the determination of contact areas of a rock joint under normal and shear loads

Barton, 1977, The shear strength of rock joints in theory and practice, Rock Mech, 10, 1, 10.1007/BF01261801 Tse, 1979, Estimating joint roughness coefficients, Int J Rock Mech Min Sci, 16, 303, 10.1016/0148-9062(79)90241-9 Maerz, 1990, Joint roughness measurement using shadow profilometry, Int J Rock Mech Min Sci, 27, 329, 10.1016/0148-9062(90)92708-M Huang, 1992, Applicability of fractal characterization and modeling to rock joint profiles, Int J Rock Mech Min Sci, 29, 89, 10.1016/0148-9062(92)92120-2 Xie, 1999, Direct fractal measurement of fracture surfaces, Int J Solids Struct, 36, 3073, 10.1016/S0020-7683(98)00141-3 Yeo, 1998, Effect of shear displacement on the aperture and permeability of a rock fracture, Int J Rock Mech Min Sci, 35, 1051, 10.1016/S0148-9062(98)00165-X Gentier, 2000, Influence of fracture geometry on shear behavior, Int J Rock Mech Min Sci, 37, 161, 10.1016/S1365-1609(99)00096-9 Yang, 2000, An experimental study on the progressive shear behavior of rock joints with tooth-shaped asperities, Int J Rock Mech Min Sci, 37, 1247, 10.1016/S1365-1609(00)00055-1 Duncan N, Hancock KE. The concept of contact stress in the assessment of the behavior of rock masses as structural foundations. In: Proceedings of the 1st congress international society for rock mechanics, vol. 2, Lisbon; 1966. p. 487–92. Iwai K. Fundamental studies of fluid flow through a single fracture. PhD thesis. Berkeley: University of California; 1976. Bandis, 1983, Fundamentals of rock joint deformation, Int J Rock Mech Min Sci, 20, 249, 10.1016/0148-9062(83)90595-8 Pyrak-Nolte LJ, Myer LR, Cook NGW, Witherspoon PA. Hydraulic and mechanical properties of natural fractures in low permeability rock. In: Proceedings of the 6th congress international society for rock mechanics. vol. 1, Montreal; 1987. p. 225–31. Hakami, 1996, Aperture measurements and flow experiments on a single natural fracture, Int J Rock Mech Min Sci, 33, 395, 10.1016/0148-9062(95)00070-4 Logan, 1986, The effect of normal stress on the real area of contact during frictional sliding in rocks, Pure Appl Geophys, 124, 471, 10.1007/BF00877212 Power CM, Hencher SR. A new experimental method for the study of real area of contact between joint walls during shear. In: Proceedings of the 2nd North American rock mechanics. Montreal; 1996. p. 1217–22. Re, 1999, Determination of contact areas in rock joints by X-ray computer tomography, Int J Rock Mech Min Sci, 36, 883, 10.1016/S0148-9062(99)00056-X Grasselli, 2003, Constitutive law for the shear strength of rock joints based on three-dimensional surface parameters, Int J Rock Mech Min Sci, 40, 25, 10.1016/S1365-1609(02)00101-6 Potyondy, 2004, A bonded-particle model for rock, Int J Rock Mech Min Sci, 41, 1329, 10.1016/j.ijrmms.2004.09.011 Cundall, 1999, Numerical experiments on rough joints in shear using a bonded particle model, 1 Park, 2009, Numerical simulation of a direct shear test on a rock joint using a bonded-particle model, Int J Rock Mech Min Sci, 46, 1315, 10.1016/j.ijrmms.2009.03.007 Jiang, 2006, Estimating the relation between surface roughness and mechanical properties of rock joints, Int J Rock Mech Min Sci, 43, 837, 10.1016/j.ijrmms.2005.11.013 Deere DU, Hendron AJ, Patton FD, Cording EJ. Design of surface and near-surface construction in rock. In: Fairhurst C, editor. Proceedings of the US rock mechanics symposium, failure and breakage of rock. New York: Society of Mining Engineers of AIME; 1967. p. 237–302. Itasca Consulting Group Inc. PFC2D (Particle Flow Code in 2 Dimensions) version 3.1. Minneapolis: Itasca; 2003. Haberfield, 1994, A mechanistically-based model for rough rock joint, Int J Rock Mech Min Sci, 31, 279, 10.1016/0148-9062(94)90898-2 Kimura, 1995, A new model for the shear strength of rock joints with irregular surfaces, 133 Yang, 2000, An experimental study on the progressive shear behavior of rock joints with tooth-shaped asperities, Int J Rock Mech Min Sci, 37, 1247, 10.1016/S1365-1609(00)00055-1 Wirth, 2002 Myshkin, 1998, Simulation of real contact in tribology, Tribol Int, 31, 79, 10.1016/S0301-679X(98)00010-3 Yu, 1991, Joint profiles and their roughness parameters, Int J Rock Mech Min Sci, 28, 333, 10.1016/0148-9062(91)90598-G Rim HR, Choi HJ, Son BK, Lee CI, Song JJ. Experimental study for shear behaviour of pseudo rock joint under constant normal stiffness condition. In: Proceedings of the 31th ITA-AITES world tunnel congress on underground space use. Istanbul; 2005. p. 175–81. Son, 2006, Effect of boundary conditions on shear behaviour of rock joints around tunnel, Tunnelling Underground Space Technol, 21, 347, 10.1016/j.tust.2005.12.167 Barton, 1973, Review of a new shear strength criterion for rock joints, Eng Geol, 7, 287, 10.1016/0013-7952(73)90013-6 Ohnishi Y, Dharmaratne PGR. Shear behaviour of physical models of rock joints under constant normal stiffness condition. In: Proceedings of the rock joints. Loen; 1990. p. 267–73. Skinas CA, Bandis SC, Demiris CA. Experimental investigations and modelling of rock joint behaviour under constant stiffness. In: Proceedings of the rock joints. Loen; 1990. p. 301–8. Olsson, 2001, An improved model for hydromechanical coupling during shearing of rock joints, Int J Rock Mech Min Sci, 38, 317, 10.1016/S1365-1609(00)00079-4