Mass estimation of transport aircraft wingbox structures with a CAD/CAE-based multidisciplinary process

C. Anhalt, H.P. Monner, E. Breitbach, Interdisciplinary wing design – structural aspects, Technical report, German Aerospace Center (DLR), Institute of Structural Mechanics, 2003. A. Bérard, A. Rizzi, A.T. Isikveren, CADac: A new geometry construction tool for aerospace vehicle pre-design and conceptual design, AIAA 2008-6219, in: 26th AIAA Applied Aerodynamics Conference, Hawaii, 2008. Bruhn, 1973 L. Cavagna, L. Riccobene, S. Ricci, A. Bérard, A. Rizzi, A fast MDO tool for aeroelastic optimization in aircraft conceptual design, AIAA 2008-5911, in: 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Canada, 2008. C. Cerulli, P.B. Meijer, M.J.L. van Tooren, Parametric modeling of aircraft families for load calculation support, in: 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Palm Springs, 2004. S.R.H. Dean, Multi-disciplinary design optimisation: Development & application at QinetiQ, in: KATnet II Multi Disciplinary Design & Configuration Optimisation Workshop, January, 2008. S.R.H. Dean, J.J. Doherty, T.R. Wallace, Impact of Fuel Systems on Aircraft Design Using a MDO Process, Aerospace Consulting, QinetiQ, Farnborough, UK, 2009. M. Dugas, Ein Beitrag zur Auslegung von Faserverbundtragflügeln im Vorentwurf, Institut für Flugzeugbau, Universität Stuttgart, 2002. M. Dugas, K. Schroeder, FAME-ACSS Documentation (Analytical Calculation of Secondary Wing Structure), Airbus Deutschland GmbH, 2004. T. Hilpert, Validierung des CFD-Verfahrens BLWF für typische Anwendungsfälle der Transportflugzeugaerodynamik, HTWK Leipzig, 2006. F. Huerlimann, R. Kelm, M. Dugas, G. Kress, Investigation of local load introduction methods in aircraft pre-design, Centre of Structure Technologies, ETH Zurich, 2010, submitted for publication. F. Huerlimann, M. Pfister, G. Kress, A sizing strategy for the buckling optimization of shell structures using an FEM-based buckling criterion, Centre of Structure Technologies, ETH Zurich, 2010, submitted for publication. L.U. Iqbal, J.P. Sullivan, Preliminary design of MALE UAV utilizing high fidelity CAD/CAE tools and design methods, AIAA 2009-1971, in: AIAA Infotech@Aerospace Conference, Seattle, Washington, 2009. O.V. Karas, V.E. Kovalev, BLWF Usersʼs Guide, 2002. E. Kesseler, J. Kos, The next step in collaborative aerospace engineering, in: RIVFʼ05 Conference Proceedings, 2005. E. Kesseler, M. Laban, W.J. Vankan, Multidisciplinary wing optimization, in: VIVACE Forum, 2005. C. Ledermann, Parametric associative CAE methods in preliminary aircraft design, Centre of Structure Technologies, ETH Zurich, 2006. Ledermann, 2005, Associative parametric CAE methods in the aircraft pre-design, Aerospace Science and Technology, 7, 641, 10.1016/j.ast.2005.05.001 Ledermann, 2006, Dynamic CAD objects for structural optimization in preliminary aircraft design, Aerospace Science and Technology, 10, 601, 10.1016/j.ast.2006.07.001 K. Leoviriyakit, S. Kim, A. Jameson, Aero-structural wing planform optimization using the Navier–Stokes equations, in: 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, New York, 2004. LMS Virtual.Lab Structures – Multi-solver FEA modeling & analysis, LMS International, Leuven (BE), 2010. MD Nastran Quick Reference Guide, MSC.Software Corporation, Santa Ana, CA, 2007. B. Nagel, H.P. Monner, E. Breitbach, Aeroelastic Tailoring transsonischer Tragflügel auf Basis anisotroper und aktiver Strukturen, Technical report, German Aerospace Center (DLR), Institute of Structural Mechanics, 2004. C. Österheld, Physikalisch begründete Analyseverfahren im integrierten multidisziplinären Flugzeugvorentwurf, Zentrum für Luft- und Raumfahrttechnik, Technische Universität Braunschweig, 2003. C. Österheld, W. Heinze, P. Horst, Preliminary design of a blended wing body configuration using the design tool PrADO, in: Proceedings of the CEAS Conference on Multidisciplinary Aircraft Design and Optimisation, Confederation of European Aerospace Societies, Cologne, Germany, 2001. J.-M. Pfaff, Parameterreduktion zu ähnlichkeitsmechanischen Gewichtsprognose im Flugzeugvorentwurf am Beispiel des Tragflügels, Institut für Flugzeugbau, Universität Stuttgart, 2008. Torenbeek, 1982 A. Van der Velden, R. Kelm, D. Kokan, J. Mertens, Application of MDO to a large subsonic transport aircraft, AIAA 2000-0844, in: 38th Aerospace Science Meeting & Exhibit, 2000. D. Weiss, Geometry-based structural optimization on CAD specification trees, Centre of Structure Technologies, ETH Zurich, 2009.