Advances in micro assembly injection moulding for use in medical systems
Tóm tắt
In micro systems technology, the process of micro assembly injection moulding is used for the generation of hybrid micro systems. With this process, more functions are integrated in less space. In the field of medical technology, miniaturisation also means new methods of treatment with fewer side effects on the patient. New cures are developed by the miniaturisation of medical instruments, such as keyhole surgery. For detailed investigations a specific demonstration was developed to display the potential of micro assembly injection moulding in medical science. This part consists of a carbon-fibre reinforced PEEK puncture needle, which incorporates three lumens. The selected materials allow use of the needle during magnetic resonance imaging. In order to attach additional equipment a plastic connector needs to be overmoulded on the needle. The investigations focus on the injection moulding process by characterising the influences of temperature, moulding parameters and material combinations on the resulting bond strength between needle and connector.
Tài liệu tham khảo
Rogalla A (1997) Analysis of the injection moulding of micro structured thermoplastic mouldings. Dissertation, RWTH Aachen University, Germany
Spennemann A (2000) A new machine and processing technology for the injection moulding of micro parts. Dissertation, RWTH Aachen University, Germany
Michaeli W, Spennemann A (2001) A new injection moulding technology for micro parts. J Poly Eng 21:87–98
Michaeli W, Opfermann D, Gärtner R (2003) Ultrasonic plastification concepts in micro injection molding. In: Proceedings of the Euspen International Topical Conference, Aachen, Germany
Michaeli W, Spennemann A, Gärtner R (2002) New plastification concepts for micro injection molding. Microsyst Technol 8:55–57
Spennemann A, Michaeli W (1999) Process analysis and machine technology for the injection molding of microstructures. In: SPE/ANTEC proceedings, New York, pp 768–772
Ziegmann C (2001) Polymer processing and micro assembly. Dissertation, RWTH Aachen University, Germany
Michaeli W, Rogalla A, Ziegmann C (2000) Processing technologies for the injection moulding of hybrid microstructures. Macromol Mater Eng 279:42–45
Michaeli W, Ziegmann C (2003) Micro assembly injection moulding for the generation of microstructures. Microsyst Technol 9:427–430
Michaeli W, Haberstroh E, Schmachtenberg E, Lützeler R, Opfermann D, Kuhlmann K, Tüchert C (2004) Verbinden von Kunststoffteilen. 22nd Internationales Kunststofftechnisches Kolloquium, 10–12 March, Aachen, Germany
Michaeli W, Opfermann D (2004) Festigkeitsuntersuchungen beim Mikro-Montagespritzgießen. Plastverarbeiter 55(10):150–152
Michaeli W, Opfermann D (2005) Bonding strength in micro injection assembly molding. In: Proceedings of the 63rd annual technical conference & exhibition (ANTEC 2005), Boston, MA, May 1–5. Society of Plastics Engineers, pp 850–855
Michaeli W, Opfermann D (2006) Increasing the feasible bonding strength in micro assembly injection molding using surface modifications. In: Proceedings of the 64rd annual technical conference & exhibition (ANTEC 2006), Charlotte, NC, May 7–11. Society of Plastics, pp 1290–1294
ISO (2006) EN ISO 10555–5 Sterile, single-use intravascular catheters - part 5: over-needle peripheral catheters. International Organization for Standardization, Geneva
Huchtemann K (2005) Process investigations into the overmoulding of a carbon fibre reinforced needle. Student thesis. Institute of Plastics Processing (IKV), Aachen, Germany