The effect of fibre chemical treatment on the steel fibre/cementitious matrix interface

ACI 544.1R-96 Report on fiber reinforced concrete:. American Concrete Institute; 1996 [Reapproved 2002]. Banthia, 2007, Toughness enhancement in steel fiber reinforced concrete through fiber hybridization, Cem Concr Res, 37, 1366, 10.1016/j.cemconres.2007.05.005 Johnston, 1992, Comparative flexural performance evaluation of steel fibre-reinforced concretes according to ASTM C1018 shows importance of fibre parameters, Mater Struct, 25, 191, 10.1007/BF02473063 Mailhot, 2001, Flexural fatigue behavior of steel fibre reinforced concrete before and after cracking, Mater and Struct/Mat et Constr, 34, 351, 10.1617/13458 Singh, 2003, Fatigue strength of steel fibre reinforced concrete in flexure, Cem Concr Compos, 25, 779, 10.1016/S0958-9465(02)00102-6 Soulioti, 2011, Effects of fibre geometry and volume fraction on the flexural behaviour of steel-fibre reinforced concrete, Strain, 47, e535, 10.1111/j.1475-1305.2009.00652.x Yazıcı, 2007, Effect of aspect ratio and volume fraction of steel fiber on the mechanical properties of SFRC, Constr Build Mater, 21, 1250, 10.1016/j.conbuildmat.2006.05.025 Aggelis, 2009, Acoustic emission and ultrasound for damage characterization of concrete elements, ACI Mater J, 106, 509 Yue, 1992, Interfacial properties of fibre-reinforced composites, J Mater Sci, 27, 3843, 10.1007/BF00545467 Khatam, 2010, Plasticity-triggered architectural effects in periodic multilayers with wavy microstructures, Int J Plast, 26, 273, 10.1016/j.ijplas.2009.06.002 Banthia, 1996, Bond-slip characteristics of steel fibers in high reactivity metakaolin (HRM) modified cement-based matrices, Cem Concr Res, 26, 657, 10.1016/S0008-8846(96)85000-9 Cunha, 2010, Pullout behavior of steel fibers in self-compacting concrete, J Mater Civ Eng, 22, 1, 10.1061/(ASCE)MT.1943-5533.0000001 Hamoush S, Abu-Lebdeh T, Cummins T, Zornig B. Pullout characterizations of various steel fibers embedded in very high-strength concrete. Am J Engng Appl Sci 3(2):418–26. Naaman, 1991, Bond-slip mechanisms of steel fibers in concrete, ACI Mater J, 88, 135 Sugama, 1992, Interface between zinc phosphate-deposited steel fibres and cement paste, J Mater Sci, 27, 2863, 10.1007/BF01154093 Weiler, 1999, Debonding behaviour of steel fibres with hooked ends, 423 Chanvillard, 1996, Pull-out behavior of corrugated steel fibers qualitative and statistical analysis, Adv Cem Based Mater, 4, 28 Robins, 2002, Pull-out behaviour of hooked steel fibres, Mater and Struct/Mat et Constr, 35, 434, 10.1007/BF02483148 Badanoiu, 2003, Cementitious composites reinforced with continuous carbon fibres for strengthening of concrete structures, Cem Concr Compos, 25, 387, 10.1016/S0958-9465(02)00054-9 Baena, 2009, Experimental study of bond behaviour between concrete and FRP bars using a pull-out test, Compos B: Eng, 40, 784, 10.1016/j.compositesb.2009.07.003 Fu, 1996, Improving the bond strength between carbon fiber and cement by fiber surface treatment and polymer addition to cement mix, Cem Concr Res, 26, 1007, 10.1016/0008-8846(96)00084-1 Lee, 2008, Interfacial bond strength of glass fiber reinforced polymer bars in high-strength concrete, Compos B: Eng, 39, 258, 10.1016/j.compositesb.2007.03.008 Li, 1990, Effect of inclining angle, bundling and surface treatment on synthetic fibre pull-out from a cement matrix, Composites, 21, 132, 10.1016/0010-4361(90)90005-H Grosse, 2007, Monitoring the steel-concrete interaction using acoustic emission techniques, 785 Abu-Lebdeh, 2011, Effect of matrix strength on pullout behavior of steel fiber reinforced very-high strength concrete composites, Constr Build Mater, 25, 39, 10.1016/j.conbuildmat.2010.06.059 Chan, 2004, Effect of silica fume on steel fiber bond characteristics in reactive powder concrete, Cem Concr Res, 34, 1167, 10.1016/j.cemconres.2003.12.023 Gray, 1984, The effect of matrix composition on fibre/matrix interfacial bond shear strength in fibre-reinforced mortar, Cem Concr Res, 14, 285, 10.1016/0008-8846(84)90116-9 Shannag, 1997, Pullout behavior of steel fibers from cement-based composites, Cem Concr Res, 27, 925, 10.1016/S0008-8846(97)00061-6 Razak, 2004, Near surface characteristics of concrete containing supplementary cementing materials, Cem Concr Compos, 26, 883, 10.1016/j.cemconcomp.2003.10.001 Sun, 2012, Influence of corrosion on the interface between zinc phosphate steel fiber and cement, Materials and Corrosion, 63, 67, 10.1002/maco.200905580 Aggelis, 2012, Influence of fiber chemical coating on the acoustic emission behavior of steel fiber reinforced concrete, Cem Concr Compos, 34, 62, 10.1016/j.cemconcomp.2011.07.003 ASTM Standard C231-03, 2003 BS EN 12390-3, 2002