Assessment of MC2010 and AS3600 models for estimating instantaneous flexural crack widths in fibre reinforced concrete members

NZS 3101: Part 2. 2006. Concrete structures standard Part 2 – commentary on the design of concrete structures. Standards New Zealand, 391 pp.

ACI-318:19. 2019. Building code requirements for structural concrete and commentary. American Concrete Industry. Farmington Hills, MI, USA.

ACI 544.1R. 2009. Report on Fiber Reinforced Concrete. ACI Committee 544, American Concrete Institute, Farmington Hills, ML.

DAfStB. 2012. Richtlinie Stahlfaserbeton. Deutscher Ausschuss fur Stahlbeton. Germany (in German).

fib Model Code 2010. 2013. Model Code 2010. Fédération Internationale du Béton: 402 pp.

AS5100.5. 2017. Australian Standard, bridge design part 5: concrete. Standards Australia.

AS3600. 2018. Concrete Structures. Australian Standard, Standards Association of Australia.

Marti, 1999, Harmonized test procedures for steel fiber reinforced concrete, ACI Mater J, 96, 676

Pfyl, T. 2003. Tragverhalten von Stahlfaserbeton. PhD Dissertation, IBK-Report No.279. Swiss Federal Institute of Technology, Switzerland. [in German].

di Prisco, 2009, Fiber reinforced concrete: new design perspectives, Mater Struct, 42, 1261, 10.1617/s11527-009-9529-4

Amin, 2018, Instantaneous crack width calculation for steel fiber reinforced concrete flexural members, ACI Struct J, 115, 535, 10.14359/51701116

Löfgren I. 2005. Fibre reinforced concrete for industrial construction – a fracture mechanics approach to material testing and structural analysis. PhD Dissertation. Department of Civil and Environmental Engineering, Chalmers University of Technology, Sweden.

Mudadu, 2019, Post-cracking behavior of polypropylene fiber reinforced concrete under bending and uniaxial tensile tests, Struct Concrete, 20, 1411, 10.1002/suco.201800224

Adebar, 1997, Shear tests of fiber concrete beams without stirrups, ACI Struct J, 94, 68

Minelli, 2005

Amin, 2016, Shear strength of steel fiber reinforced concrete beams with stirrups, Eng Struct, 111, 323, 10.1016/j.engstruct.2015.12.026

Kaufmann, 2019, Shear stress across cracks in steel fibre reinforced concrete, Eng Struct, 186, 508, 10.1016/j.engstruct.2019.02.027

de Montaignac, 2012, Design of SFRC structural elements: flexural behaviour prediction, Mater Struct, 45, 623, 10.1617/s11527-011-9785-y

Deluce, 2013, Cracking behavior of steel fiber reinforced concrete members containing conventional reinforcement, ACI Struct J, 110, 481

Bernardi, 2016, Experimental and numerical study on cracking process in RC and R/FRC ties, Mater Struct, 49, 261, 10.1617/s11527-014-0494-1

Amin, 2017, Instantaneous deflection calculation for steel fiber reinforced concrete one way members, Eng Struct, 131, 438, 10.1016/j.engstruct.2016.10.041

Tiberti, 2018, Crack development in steel fibre reinforced concrete members with conventional rebars, Mag Concr Res

Tiberti, 2015, Cracking behavior in reinforced concrete members with steel fibres: a comprehensive experimental study, Cem Concr Compos, 868, 24, 10.1016/j.cemconres.2014.10.011

Sturm, 2019, Rational design approach for the instantaneous and time-dependent serviceability deflections and crack widths of FRC and UHPFRC continuous and simply supported beams, ASCE J. Struct. Eng., 144, 0419138

Bernard ES. Crack Width Reduction in Reinforced Concrete Members Using Barchip Macro-Synthetic Fibers, World Tunnelling Congress 2016, San Francisco, April 22-28; 2016.

Bernard, 2019, Effect of synthetic fibers and aggregate size on flexural crack widths, ACI Struct J, 116, 1, 10.14359/51713286

Bernard, 2019, Predicting crack widths in FRC/Reinforced Concrete members using small deformation post-crack parameters, Struct Concrete, 2019, 1

ASTM C1609/1609M, 2006. Standard method for flexural performance of fiber-reinforced concrete (using beam with third-point loading). ASTM International, West Conshohocken, PA.

Fischer, 2002, Influence of matrix ductility on tension-stiffening behavior of steel reinforced engineered cementitious composites (ECC), ACI Struct J, 99, 104

Amin, 2016, Modelling the tension stiffening effect in steel fiber reinforced-reinforced concrete, Mag Concr Res, 68, 339, 10.1680/macr.15.00188

Marti, 1998, Tension chord model for structural concrete, Struct Eng Int, 8, 287, 10.2749/101686698780488875

Kaufmann, 2019, Compression field analysis of FRC based on the cracked membrane model, ACI Struct J, 116, 213, 10.14359/51716763

AS3600. 2009. Concrete structures. Standards Australia.

Eurocode 2. 2004. Design of Concrete Structures – Part 1-1: General Rules and Rules for Buildings, European-Commission.

Tiberti, 2014, Influence of concrete strength on crack development in SFRC members, Cem Concr Compos, 45, 176, 10.1016/j.cemconcomp.2013.10.004

Marti P. Stahlbeton Grundzuge (structural concrete fundementals). Lecture Notes, Institute of Structural Engineering, ETH, Zurich; 2005. [in German].

Fargier-Gabaldon, 2018, Evaluation of effective moment of inertia for calculation of short-term deflections of steel fiber reinforced concrete flexural members

Amin, 2019, Steel fiber-reinforced concrete beams—Part I: material characterization and in-service behavior, ACI Struct J, 116, 113

Conforti, 2018, Influence of steel, glass, and polymer fibers on the cracking behavior of reinforced concrete beams under flexure, Struct Concrete, 2018, 1

EN 14651. 2007. Test method for metallic fibre concrete- measuring the flexural tensile strength (Limit of Proportionality (LOP), residual). European Committee for Standardization: 17 pp.

Amin A. Post Cracking Behavior of Steel Fibre Reinforced Concrete: from Material to Structure, PhD dissertation, School of Civil and Environmental Engineering, The University of New South Wales, Sydney, NSW, Australia, 2015.

Conforti, 2018, Comparing test methods for the mechanical characterization of fiber reinforced concrete, Struct Concrete, 19, 656, 10.1002/suco.201700057

RILEM TC 162-TDF, 2003. Test and design methods for steel fibre reinforced concrete. Round-round robin analysis of the RILEM TC 162-TDF beam bending test: Part 2 Approximation of Δ from the CMOD response. Materials and Structures: 36: 621–30.

Amin, 2016, Predicting the flexural response of steel fibre reinforced concrete prisms using a sectional model, Cem Concr Compos, 67, 339

Amin, 2015, Derivation of the σ-w relationship for SFRC from prism bending tests, Struct Concrete, 16, 93, 10.1002/suco.201400018

Metelli, 2014, Influence of the relative rib area on bond behaviour, Mag Concr Res, 66, 277, 10.1680/macr.13.00198

Harajli, 2006, Effect of confinement using steel, FRC, or FRP on the bond stress-slip response of steel bars under cyclic loading, Mater Struct, 39, 621, 10.1007/s11527-005-9054-z

Bandelt, 2016, Bond behavior of steel reinforcement in high performance fiber-reinforced cementitious composite flexural members, Mater Struct, 49, 71, 10.1617/s11527-014-0475-4

Metelli, 2017, Experimental study on staggered lapped bars in fiber reinforced concrete beams, Compos Struct, 179, 655, 10.1016/j.compstruct.2017.07.069

Marchand, 2016, Bond behaviour of reinforcing bars in UHPFRC, Mater Struct, 49, 1979, 10.1617/s11527-015-0628-0