A review on the performance of nanoparticles suspended with refrigerants and lubricating oils in refrigeration systems

Choi, 1995, Development and applications of Non-Newtonian flows’ Serrano, 2009, Nanotechnology for sustainable energy, Renewable and Sustainable Energy Reviews, 13, 2373, 10.1016/j.rser.2009.06.003 Elcock, 2007 Hindawi, Special issue on heat transfer in nanofluids; 2009. Eastman, 1996, Enhanced thermal conductivity through the development of nanofluids, Mater Res Soc Symp Proc, 457, 3, 10.1557/PROC-457-3 Liu, 2006, Enhancement of thermal conductivity with CuO for Nanofluids, Chemical Engineering and Technology, 29, 72, 10.1002/ceat.200500184 Duangthongsuk, 2010, An experimental study on the heat transfer performance and pressure drop of TiO2–water nanofluids flowing under a turbulent flow regime, International Journal of Heat and Mass Transfer, 53, 334, 10.1016/j.ijheatmasstransfer.2009.09.024 Trisaksri, 2009, Nucleate pool boiling heat transfer of TiO2–R141b nanofluids, International Journal of Heat and Mass Transfer, 52, 1582, 10.1016/j.ijheatmasstransfer.2008.07.041 Paul, 2010, Techniques for measuring the thermal conductivity of nanofluids: a review, Renewable and Sustainable Energy Reviews, 14, 1913, 10.1016/j.rser.2010.03.017 Godson, 2010, Enhancement of heat transfer using nanofluids—an overview, Renewable and Sustainable Energy Reviews, 14, 629, 10.1016/j.rser.2009.10.004 Jiang, 2009, Measurement and model on thermal conductivities of carbon nanotube nanorefrigerants, International Journal of Thermal Sciences, 48, 1108, 10.1016/j.ijthermalsci.2008.11.012 Park, 2007, Enhancement of nucleate boiling heat transfer using carbon nanotubes, International Journal of Heat and Mass Transfer, 50, 4499, 10.1016/j.ijheatmasstransfer.2007.03.012 Park, 2007, Boiling heat transfer enhancement with carbon nanotubes for refrigerants used in building air conditioning, Energy and Buildings, 39, 1061, 10.1016/j.enbuild.2006.12.001 Das, 2003, Pool boiling characteristics of nano fluids, International Journal of Heat and Mass Transfer, 46, 851, 10.1016/S0017-9310(02)00348-4 Das, 2003, Pool boiling of nano-fluids on horizontal narrow tubes, International Journal of Multiphase Flow, 29, 1237, 10.1016/S0301-9322(03)00105-8 Witharana, 2003 You, 2003, Effect of nanoparticles on critical heat flux of water in pool boiling heat transfer, Applied Physics Letters, 83, 3374, 10.1063/1.1619206 Kim, 2004, Pool boiling heat transfer in saturated nanofluids, 621 Tu, 2004, An experimental study of nanofluid boiling heat transfer, 15 Vassallo, 2004, Pool boiling heat transfer experiments in silica–water nanofluids, International Journal of Heat and Mass Transfer, 47, 407, 10.1016/S0017-9310(03)00361-2 Bang, 2005, Boiling heat transfer performance and phenomena of Al2O3–water nanofluids from a plain surface in a pool, International Journal of Heat and Mass Transfer, 48, 2407, 10.1016/j.ijheatmasstransfer.2004.12.047 Moreno, 2005, Pool boiling heat transfer of alumina–water, zinc oxide–water and alumina–water+ethylene glycol nanofluids, 625 Wen, 2005, Experimental investigation into the pool boiling heat transfer of aqueous based γ-alumina nanofluids, Journal of Nanoparticle Research, 7, 265, 10.1007/s11051-005-3478-9 Eastman, 2001, Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticles, Applied Physics Letters, 78, 718, 10.1063/1.1341218 Hwang, 2006, Investigation on characteristics of thermal conductivity enhancement of nanofluids, Current Applied Physics, 6, 1068, 10.1016/j.cap.2005.07.021 Yoo, 2007, Study of thermal conductivity of nanofluids for the application of heat transfer fluids, Thermochimica Acta, 455, 66, 10.1016/j.tca.2006.12.006 Choi, 2001, Anomalous thermal conductivity enhancement in nanotube suspensions, Applied Physics Letters, 79, 2252, 10.1063/1.1408272 Yang, 2006 Jana, 2007, Enhancement of fluid thermal conductivity by the addition of single and hybrid nano-additives, Thermochimica Acta, 462, 45, 10.1016/j.tca.2007.06.009 Kang, 2006, Estimation of thermal conductivity of nanofluid using experimental effective particle, Experimental Heat Transfer, 19, 181, 10.1080/08916150600619281 Zhang, 2006, Experimental study on the effective thermal conductivity and thermal diffusivity of nanofluids, International Journal of Thermophysics, 27, 569, 10.1007/s10765-006-0054-1 Zhang, 2006, Effective thermal conductivity and thermal diffusivity of nanofluids containing spherical and cylindrical nanoparticles, Journal of Applied Physics, 100, p044325, 10.1063/1.2259789 Zeinali Heris, 2007, Experimental investigation of convective heat transfer of Al2O3/water nanofluid in circular tube, International Journal of Heat and Fluid Flow, 28, 203, 10.1016/j.ijheatfluidflow.2006.05.001 Timofeeva, 2007, Thermal conductivity and particle agglomeration in alumina nanofluids: experiment and theory, Physical Review E, 76, p16, 10.1103/PhysRevE.76.061203 Lee, 2008, Effective viscosities and thermal conductivities of aqueous nanofluids containing low volume concentrations of Al2O3 nanoparticles, International Journal of Heat and Mass Transfer, 51, 2651, 10.1016/j.ijheatmasstransfer.2007.10.026 Yu, 2007 Vajjha, 2009, Experimental determination of thermal conductivity of three nanofluids and development of new correlations, International Journal of Heat and Mass Transfer, 52, 4675, 10.1016/j.ijheatmasstransfer.2009.06.027 Leong, 2010, Performance investigation of an automotive car radiator operated with nanofluid based coolants (nanofluid as a coolant in a radiator), Applied Thermal Engineering, 10.1016/j.applthermaleng.2010.07.019 Shen, 2006 Wen, 2009, Review of nanofluids for heat transfer applications, Particuology, 7, 141, 10.1016/j.partic.2009.01.007 Xuan, 2000, Conceptions for heat transfer correlation of nanofluids, International Journal of Heat and Mass Transfer, 43, 3701, 10.1016/S0017-9310(99)00369-5 Choi, 2001 Keblinski, 2002, Charge distribution and stability of charged carbon nanotubes, Physical Review Letters, 89, 10.1103/PhysRevLett.89.255503 Xuan, 2000, Heat transfer enhancement of nanofluids, International Journal of Heat and Fluid Flow, 21, 58, 10.1016/S0142-727X(99)00067-3 Hong, 2005, Study of the enhanced thermal conductivity of Fe nanofluids, Journal of Applied Physics, 97, 10.1063/1.1861145 Patel, 2003, Thermal conductivities of naked and monolayer protected metal nanoparticle based nanofluids: Manifestation of anomalous enhancement and chemical effects, Applied Physics Letters, 83, 2931, 10.1063/1.1602578 Masuda, 1993, Alteration of thermal conductivity and viscosity of liquid by dispersing ultra-fine particles (dispersion of y-A12O3, SiO2, and TiO2 ultra-fine particles), Netsu Bussei, 4, 227, 10.2963/jjtp.7.227 Lee, 1999, Measuring thermal conductivity of fluids containing oxide nanoparticles, ASME Journal of Heat Transfer, 121, 280, 10.1115/1.2825978 Xie, 2002, Thermal conductivity enhancement of suspensions containing nanosized alumna particles, Journal of Applied Physics, 91, 4568, 10.1063/1.1454184 Zhou, 2002, Experimental research on the thermophysical properties of nanoparticle suspensions using the quasi-steady method, Annual Proceedings of Chinese Engineering Thermophysics, 889 Murshed, 2005, Enhanced thermal conductivity of TiO2–water based nanofluids, International Journal of Thermal Sciences, 44, 367, 10.1016/j.ijthermalsci.2004.12.005 Xie, 2003, Nanofluids containing multiwalled carbon nanotubes and their enhanced thermal properties, Journal of Applied Physics, 94, 4967, 10.1063/1.1613374 Assael, 2004, Thermal conductivity of suspensions of carbon nanotubes in water, International Journal of Thermophysics, 25, 971, 10.1023/B:IJOT.0000038494.22494.04 Hao, 2009, Heat transfer characteristics of refrigerant-based nanofluid flow boiling inside a horizontal smooth tube, International Journal of Refrigeration, 32, 1259, 10.1016/j.ijrefrig.2009.01.025 Wu, 2008, Investigation of pool boiling heat transfer of R11 with TiO2 nano-particles, Journal of Engineering Thermophysics, 29, 124 Hao, 2010, Nucleate pool boiling heat transfer characteristics of refrigerant/oil mixture with diamond nanoparticles, International Journal of refrigeration, 33, 347, 10.1016/j.ijrefrig.2009.11.007 Wang, 2006, Nano-scale thermal transporting and its use in engineering, 66 Li, 2006, Pool boiling heat transfer experiments of refrigerants with nanoparticle TiO2, 325 Fu, 2008, Experiment study on performance of refrigerator using nano-particle additive, Journal of Xi’an Jiaotong University, 42, 852 http://www.nano.gov/html/research/Achievements_pdf/02-Energy/Nanoparticlesdramaticallyimprovechillerefficiency_nist.pdf, Access date: 27/03/2010. Kedzierski, 2009, Effect of CuO nanoparticle concentration on R134a/lubricant pool-boiling heat transfer, Journal of Heat Transfer, 131, p7, 10.1115/1.3072926 Peng, 2009, Heat transfer characteristics of refrigerant-based nanofluid flow boiling inside a horizontal smooth tube, International Journal of Refrigeration, 32, 1259, 10.1016/j.ijrefrig.2009.01.025 Kedzierski, 2007 Bi, 2007, Experimental investigation of a refrigerator with a nano-refrigerant Qinghua Daxue Xuebao, Journal of Tsinghua University, 47, 2002 Jin, 2010, The effects of nanoparticles on absorption heat and mass transfer performance in NH3/H2O binary nanofluids, International Journal of Refrigeration, 33, 269, 10.1016/j.ijrefrig.2009.10.004 Naphon, 2009, Heat pipe efficiency enhancement with refrigerant–nanoparticles mixtures, Energy Conversion and Management, 50, 772, 10.1016/j.enconman.2008.09.045 Putnam, 2006, Thermal conductivity of nanoparticle suspensions, Journal of Applied Physics, 99, 10.1063/1.2189933 Wang, 2003, A refrigerating system using HFC134a and mineral lubricant appended with n-TiO2(R) as working fluids, 888 Bi, 2008, Application of nanoparticles in domestic refrigerators, Applied Thermal Engineering, 28, 1834, 10.1016/j.applthermaleng.2007.11.018 Lee, 2009, Application of fullerene-added nano-oil for lubrication enhancement in friction surfaces, Tribology International, 42, 440, 10.1016/j.triboint.2008.08.003 Lee, 2009, Performance evaluation of nano-lubricants of fullerene nanoparticles in refrigeration mineral oil, Current Applied Physics, 9, 128, 10.1016/j.cap.2008.12.054 Jaekeun, 2007, Enhancement of lubrication properties of nano-oil by controlling the amount of fullerene nanoparticle additives, Tribology Letters, 28, 203, 10.1007/s11249-007-9265-2 2010 Wang, 2007, Experimental study on the effect of nano-scale particle on the condensation process Li, 2008, Thermal performance of nanofluid flow in microchannels, International Journal of Heat and Fluid Flow, 29, 1221, 10.1016/j.ijheatfluidflow.2008.01.005 Praveen, 2009, Numerical study of turbulent flow and heat transfer characteristics of nanofluids considering variable properties, International Journal of Thermal Sciences, 48, 290, 10.1016/j.ijthermalsci.2008.01.001 Lee, 2007, Assessment of the effectiveness of nanofluids for single-phase and two-phase heat transfer in micro-channels, International Journal of Heat and Mass Transfer, 50, 452, 10.1016/j.ijheatmasstransfer.2006.08.001 Vasu, 2009, Heat transfer with nanofluids for electronic cooling, International Journal of Materials and Product Technology, 34, 158, 10.1504/IJMPT.2009.022410 Pantzali, 2009, Investigating the efficacy of nanofluids as coolants in plate heat exchangers (PHE), Chemical Engineering Science, 64, 3290, 10.1016/j.ces.2009.04.004 Peng, 2009, Measurement and correlation of frictional pressure drop of refrigerant-based nanofluid flow boiling inside a horizontal smooth tube, International Journal of Refrigeration, 32, 1756, 10.1016/j.ijrefrig.2009.06.005 Kristen, 2010, Flow-boiling heat transfer of R-134a-based nanofluids in a horizontal tube, International Journal of Heat and Mass Transfer, 53, 944, 10.1016/j.ijheatmasstransfer.2009.11.026 Chein, 2007, Experimental microchannel heat sink performance studies using nanofluids, International Journal of Thermal Sciences, 46, 57, 10.1016/j.ijthermalsci.2006.03.009 He, 2007, Heat transfer and flow behavior of aqueous suspensions of TiO2 nanoparticles (nanofluids) flowing upward through a vertical pipe, International Journal of Heat and Mass Transfer, 50, 2272, 10.1016/j.ijheatmasstransfer.2006.10.024 Bartelt, 2008, Flow-boiling of R-134a/POE/CuO nanofluids in a horizontal tube Zurcher, 1997, Flow boiling and pressure drop measurements for R-134a/oil mixtures. Part 2. Evaporation in a plain tube, HVAC&R Research, 3, 54, 10.1080/10789669.1997.10391361 Kim, 2009, Convective heat transfer characteristics of nanofluids under laminar and turbulent flow conditions, Current Applied Physics, 9, pe119, 10.1016/j.cap.2008.12.047 Hwang, 2006, Thermal conductivity and lubrication characteristics of nanofluids, Current Applied Physics, 6S1, e67, 10.1016/j.cap.2006.01.014 Guoliang, 2009, The migration characteristics of nanoparticles in the pool boiling process of nanorefrigerant and nanorefrigerant–oil mixture, International Journal of Refrigeration, 32, 114, 10.1016/j.ijrefrig.2008.08.007 Choi, 2008, Preparation and heat transfer properties of nanoparticle-in-transformer oil dispersions as advanced energy-efficient coolants, Current Applied Physics, 8, 710, 10.1016/j.cap.2007.04.060 Wu, 2009, Thermal energy storage behavior of Al2O3–H2O nanofluids, Thermochimica Acta, 483, 73, 10.1016/j.tca.2008.11.006 2009 Sarit, 2006, Nanofluids—the cooling medium of the future, Heat Transfer Engineering, 27, 1, 10.1080/01457630600904585 Bang, 2004, Boiling heat transfer performance and phenomena of Al2O3–water nano fluids from a plain surface in a pool, 1 Sobhan, 2008