A statistical operating cycle description for prediction of road vehicles’ energy consumption

Pär Pettersson1, Pär Johannesson2, Bengt Jacobson1, Fredrik Bruzelius1,3, Lars Fast4, Sixten Berglund1,5
1Department of Mechanics and Maritime Sciences, Chalmers University of Technology, Hörsalsvägen 7A, 412 96 Gothenburg, Sweden
2RISE Research Institutes of Sweden, Gibraltargatan 35, 412 79, Gothenburg, Sweden
3Driver and Vehicle, VTI Swedish National Road and Transport Research Institute, Box 8072, 402 78 Gothenburg, Sweden
4RISE Research Institutes of Sweden, Box 857, 501 15 Borås, Sweden
5Powertrain Engineering, Volvo AB, Gropegårdsgatan 2, 405 08 Gothenburg, Sweden

Tài liệu tham khảo

American Association of State Highway and Transportation Officials Executive Committee, 2001. A policy on geometric design of highways and streets. 4th ed. Washington D.C., U.S.: American Association of State Highway and Transportation Officials. Amirjamshidi, 2015, Development of simulated driving cycles for light, medium, and heavy duty trucks: case of the Toronto Waterfront Area, Transp. Res. Part D: Transp. Environ., 34, 255, 10.1016/j.trd.2014.11.010 Andrén, 2006, Power spectral density approximations of longitudinal road profiles, Int. J. Veh. Des., 40, 2, 10.1504/IJVD.2006.008450 Åsbogård, M., et al., 2007. Improving system design of a hybrid powertrain using stochastic drive cycles and dynamic programming. In: SAE World Congress and Exhibition. Detroit, MI, USA. doi:https://doi.org/10.4271/2007-01-0304. <http://papers.sae.org/2007-01-0304/> (visited on 08/05/2018). Ashtari, 2012, Using large driving record samples and a stochastic approach for real-world driving cycle construction: winnipeg driving cycle, Transp. Sci., 48, 170, 10.1287/trsc.1120.0447 Bogsjö, 2008, Coherence of road roughness in left and right wheel-path, Veh. Syst. Dyn., 46, 599, 10.1080/00423110802018289 Brady, 2016, Development of a driving cycle to evaluate the energy economy of electric vehicles in urban areas, Appl. Energy, 177, 165, 10.1016/j.apenergy.2016.05.094 Brodtkorb, P., et al., 2000. WAFO – a Matlab Toolbox for the Analysis of Random Waves and Loads. In: Proc. 10’th Int. Offshore and Polar Eng. Conf, IS OPE, Seattle, USA. vol. 3, pp. 343–350. Davis, 2006, Science, engineering, and statistics, Appl. Stochastic Models Bus. Indust., 22, 401, 10.1002/asmb.643 Dodds, 1973, The description of road surface roughness, J. Sound Vib., 31, 175, 10.1016/S0022-460X(73)80373-6 Environment Canada, 2015. Regulations Amending the On-Road Vehicle and Engine Emission Regulations and Other Regulations Made Under the Canadian Environmental Protection Act, 1999. Canada Gazette, Part II, vol. 149. 5–350 Albert St, Ottawa ON, Canada. <http://canadagazette.gc.ca/rp-pr/p2/2015/2015-07-29/html/sor-dorsl86-eng.html> (visited on 03/13/2019). Edlund, S., Fryk, P.-O., 2004. The Right Truck for the Job with Global Truck Application Descriptions. In: SAE technical paper 2004–01-2645. doi:https://doi.org/10.4271/2004-01-2645. Environmental Protection Agency and National Highway Traffic Safety Administration, 2016. Greenhouse Gas Emissions and Fuel Efficiency Standards for Medium- and Heavy-Duty Engines and Vehicles—Phase 2. Federal Register, vol. 81, No. 206. 8601 Adelphi Road, College Park, MD, U.S. <https://www.govinfo.gov/content/pkg/FR-2016-10-25/pdf/2016-21203.pdf> (visited on 03/13/2019). European Commission, 2018. Proposal for a regulation of the European parliament and of the council setting CO2 emission performance standards for new heavy-duty vehicles, COM(2018) 284 final/2. Brussels Publications Office. 2 rue Mercier, Luxembourg. <https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:52018PC0284R(01)> (visited on 03/13/2019). Fetene, 2017, Harnessing big data for estimating the energy consumption and driving range of electric vehicles, Transp. Res. Part D: Transp. Environ., 54, 1, 10.1016/j.trd.2017.04.013 Genikomsakis, 2017, A computationally efficient simulation model for estimating energy consumption of electric vehicles in the context of route planning applications, Transp. Res. Part D: Transp. Environ., 50, 98, 10.1016/j.trd.2016.10.014 Ghandriz, 2016, Optimization based design of heterogeneous truck fleet and electric propulsion, 328 Ghandriz, T., 2018. Transportation Mission Based Optimization of Heavy Vehicle Fleets including Propulsion Tailoring. Licentiate thesis. Gothenburg, Sweden: Chalmers University of Technology. <https://research.Chalmers.se/publication/505773> (visited on 03/13/2019). Guzzella, 2013 Ho, 2014, Developing Singapore Driving Cycle for passenger cars to estimate fuel consumption and vehicular emissions, Atmos. Environ., 97, 353, 10.1016/j.atmosenv.2014.08.042 ISO 8608, 1995 ISO 8855, 2011 Jeffreys, I., Graves, G., Roth, M., 2018. Evaluation of eco-driving training for vehicle fuel use and emission reduction: a case study in Australia. In: Transportation Research Part D: Transport and Environment. Special Issue on Traffic Modeling for Low-Emission Transport 60, pp. 85–91. doi:https://doi.org/10.1016/j.trd.2015.12.017. Jing, 2017, Building Tianjin driving cycle based on linear discriminant analysis, Transp. Res. Part D: Transp. Environ., 53, 78, 10.1016/j.trd.2017.04.005 Johannesson, 2016, AR(1) time series with autoregressive gamma variance for road topography modeling, Probab. Eng. Mech., 43, 106, 10.1016/j.probengmech.2015.12.006 Johannesson, 2014, Modelling of road profiles using roughness indicators, Int. J. Veh. Des., 66, 317, 10.1504/IJVD.2014.066068 Johannesson, 2017, Laplace distribution models for road topography and roughness, Int. J. Veh. Performance, 3, 224, 10.1504/IJVP.2017.085032 Karlsson, 2007 Kivekäs, 2018, Stochastic driving cycle synthesis for analyzing the energy consumption of a battery electric bus, IEEE Access, 6, 55586, 10.1109/ACCESS.2018.2871574 Lai, 2015, The effects of eco-driving motivation, knowledge and reward intervention on fuel efficiency, Transp. Res. Part D: Transp. Environ., 34, 155, 10.1016/j.trd.2014.10.003 Levermore, T., Ordys, A., Deng, J., 2014. A review of driver modelling. In: 2014 UKACC International Conference on Control (CONTROL). In: 2014 UKACC International Conference on Control (CONTROL), pp. 296–300. doi:https://doi.org/10.1109/CONTROL.2014.6915156. Liu, 2016, Customizing driving cycles to support vehicle purchase and use decisions: Fuel economy estimation for alternative fuel vehicle users, Transp. Res. Part C: Emerg. Technol., 67, 280, 10.1016/j.trc.2016.02.016 Liu, 2017, Impact of road gradient on energy consumption of electric vehicles, Transp. Res. Part D: Transp. Environ., 54, 74, 10.1016/j.trd.2017.05.005 Llopis-Castelló, 2018, Impact of horizontal geometric design of two-lane rural roads on vehicle co2 emissions, Transp. Res. Part D: Transp. Environ., 59, 46, 10.1016/j.trd.2017.12.020 Maghsood, 2016, Detection of steering events using hidden Markov models with multivariate observations, Int. J. Veh. Syst. Model. Test., 11, 313 McGordon, 2011, Development of a driver model to study the effects of real-world driver behaviour on the fuel consumption, Proc. Inst. Mech. Eng., Part D: J. Automobile Eng., 225, 1518, 10.1177/0954407011409116 Ministry of Economy, Trade and Industry, 2011. Final Report of Joint Meeting between the Automobile Evaluation Standards Subcommittee, Energy Efficiency Standards Subcommittee of the Advisory Committee for Natural Resources and Energy and the Automobile Fuel Efficiency Standards Subcommittee, Automobile Section, Land Transport Division of the Council for Transport Policy. The Automobile Evaluation Standard Subcommittee, Energy Efficiency Standards Subcommittee of the Advisory Committee for Natural Resources and Energy, The Automobile Fuel Efficiency Standards Subcommittee, Automobile Section, Land Transport Division of the Council for Transport Policy. 1-3-1 Kasumigaseki, Chiyoda-ku, Tokyo 100–8901, Japan. <https://www.eccj.or.jp/top_runner/pdf/tr_passenger_vehicles_dec2011.pdf> (visited on 03/13/2019). Nedělková, 2017, Modelling of optimal tyre selection for a certain truck and transport application, Int. J. Veh. Syst. Model. Test., 12, 284 Nilsson, 2015, Driver model based automated driving of long vehicle combinations in emulated highway traffic, 361 Ntziachristos, L., Samaras, Z., 2018. EMEP/EEA air pollutant emission inventory guidebook 2016 Part B. l.A.3.b.i-iv Road transport 2018. Tech. rep. EEA Report No 21/2016. Copenhagen, Denmark: European Environment Agency. <https://www.eea.europa.eu/publications/emep-eea-guidebook-2016/part-b-sectoral-guidance-chapters/I-energy/1-a-combustion/l-a-3-b-i/view> (visited on 03/13/2019). Nyberg, 2016, Using real-world driving databases to generate driving cycles with equivalence properties, IEEE Trans. Veh. Technol., 65, 4095, 10.1109/TVT.2015.2502069 Nyberg, 2017, Driving cycle equivalence and transformation, IEEE Trans. Veh. Technol., 66, 1963, 10.1109/TVT.2016.2582079 Pacejka, 2012 Pettersson, P., 2017. On Numerical Descriptions of Road Transport Missions. Licentiate thesis. Gothenburg, Sweden: Chalmers University of Technology. <https://research.chalmers.se/publication/249525> (visited on 08/06/2018). Pettersson, 2018, A proposal for an operating cycle description format for road transport missions, Eur. Transp. Res. Rev., 10, 1 Pettersson, P., et al., 2016. Influence of hill-length on energy consumption for hybridized heavy transports in long-haul transports. In: 7th Commercial Vehicle Workshop Graz. Graz, Austria: TU Graz. <https://research.chalmers.se/publication/236668> (visited on 06/18/2018). Pourabdollah, M., Grauers, A., Egardt, B., 2013. Effect of driving patterns on components sizing of a series PHEV. In: IF AC Proceedings Volumes (IFAC-PapersOnline) 7.1, pp. 17–22. doi:https://doi.org/10.3182/20130904-4-JP-2042.00013. Sentoff, 2015, Implications of driving style and road grade for accurate vehicle activity data and emissions estimates, Transp. Res. Part D: Transp. Environ., 35, 175, 10.1016/j.trd.2014.11.021 Shi, 2016, Research on Markov property analysis of driving cycles and its application, Transp. Res. Part D: Transp. Environ., 47, 171, 10.1016/j.trd.2016.05.013 Speckert, 2014, The Virtual Measurement Campaign VMC concept – a methodology for georeferenced description and evaluation of environmental conditions for vehicle loads and energy efficiency, 88 Transportation Association of Canada, 2011. Geometric design guide for Canadian roads. Update 2011. Ottawa, Canada: Transportation association of Canada. Trafikverket, 2015a. Krav for vägars och gators utformning. Tech. rep. 2015:086. OCLC: 942315330. Borlange, SE: Trafikverket. <http://online4.ineko.se/trafikverket/Product/Detail/48631> (visited on 08/06/2018). Trafikverket, 2015b. Råd for vägars och gators utformning. Tech. rep. 2015:087. OCLC: 942315159. Borlange, SE: Trafikverket. <http://online4.ineko.se/trafikverket/Product/Detail/48632> (visited on 08/06/2018). Vepsäläinen, 2018, Development and validation of energy demand uncertainty model for electric city buses, Transp. Res. Part D: Transp. Environ., 63, 347, 10.1016/j.trd.2018.06.004 WAFO group, 2000. WAFO – A Matlab Toolbox for Analysis of Random Waves and Loads – A Tutorial. Math. Stat., Center for Math. Sci., Lund Univ. Lund, Sweden. <http://www.maths.lth.se/matstat/wafo> (visited on 03/13/2019). Wong, 2008 Wyatt, 2014, The impact of road grade on carbon dioxide (CO2) emission of a passenger vehicle in real-world driving, Transp. Res. Part D: Transp. Environ., 32, 160, 10.1016/j.trd.2014.07.015 Yang, L., He, H., 2018. China’s Stage VI emissions standard for heavy-duty vehicles (final rule). International Council on Clean Transportation. Policy update. No. 19 Jianguomenway St., Beijing, China. <https://www.theicct.org/sites/default/files/publications/China_VI_Policy_Update_20180720.pdf> (visited on 03/13/2019).