Characterization of light diesel fraction obtained from upgraded heavy oil

Wang, 2017, Co-hydrotreating of algae and used engine oil for the direct production of gasoline and diesel fuels or blending components, Energy, 136, 151, 10.1016/j.energy.2016.03.084 Hart, 2014, Down-hole heavy crude oil upgrading by CAPRI: effect of hydrogen and methane gases upon upgrading and coke formation, J. Wood Fuel, 119, 226, 10.1016/j.fuel.2013.11.048 Ameen, 2017, Catalytic hydrodeoxygenation of triglycerides: an approach to clean diesel fuel production, Renew. Sust. Energ. Rev., 80, 1072, 10.1016/j.rser.2017.05.268 Hein, 2006, Heavy oil and oil (tar) sands in North America: an overview & summary of contributions, Nat. Resour. Res., 15, 67, 10.1007/s11053-006-9016-3 Carillo, 2013, Upgrading of heavy crude oils: castilla, Fuel Process. Technol., 109, 156, 10.1016/j.fuproc.2012.09.059 Omajali, 2017, In-situ catalytic upgrading of heavy oil using dispersed bionanoparticles supported on gram-positive and gram-negative bacteria, Appl. Catal. B: Environ., 203, 807, 10.1016/j.apcatb.2016.10.074 Martinez-Palou, 2011, Transportation of heavy and extra-heavy crude oil by pipeline: A review, J. Pet. Sci. Eng., 75, 274, 10.1016/j.petrol.2010.11.020 Alaei, 2017, Heavy crude oil upgrading using homogenous nanocatalyst, J. Pet. Sci. Eng., 158, 47, 10.1016/j.petrol.2017.08.031 Davudov, 2017, A systematic comparison of various upgrading techniques for heavy oil, J. Pet. Sci. Eng., 156, 623, 10.1016/j.petrol.2017.06.040 Shen, 2008, Visbreaking of Chinese oil sand bitumen, Pet. Sci. Technol., 26, 1676, 10.1080/10916460701287748 Zhang, 2014, Bifunctional catalyst for petroleum residue cracking gasification, Fuel Part B, 117, 1196, 10.1016/j.fuel.2013.07.048 Demirbas, 2017, Optimization of crude oil refining products to valuable fuel blends, Pet. Sci. Technol., 35, 406, 10.1080/10916466.2016.1261162 Bolf, 2010, Development of soft sensor for diesel fuel quality estimation, Chem. Eng. Technol., 33, 405, 10.1002/ceat.200900435 Kar, 2016, Application of blast furnace slag as a catalyst for catalytic cracking of used frying sunflower oil, Energy Explor. Exploit., 34, 262, 10.1177/0144598716630160 Alsobaai, 2013, Thermal cracking of petroleum residue oil using three level factorial design, J. King Saud Univ. Eng. Sci., 25, 21 Stratiev, 2015, Investigation of relationships between petroleum properties and their impact on crude oil compatibility, Energy Fuel., 29, 7836, 10.1021/acs.energyfuels.5b01822 Tingyu, 2000, Effect of calcium oxide on pyrolysis of coal in a fluidized bed, Fuel Process. Technol., 64, 271, 10.1016/S0378-3820(00)00075-8 Murphy, 2012, The evaluation of viscosity and density of blends of Cyn-diesel pyrolysis fuel with conventional diesel fuel in relation to compliance with fuel specifications EN 590:2009, Fuel, 91, 112, 10.1016/j.fuel.2011.06.032 Rehan, 2017, Effect of zeolite catalysts on pyrolysis liquid oil, Biodeterior. Biodegrad., 119, 162, 10.1016/j.ibiod.2016.11.015 Ahmad, 2016, Catalytic pyrolysis of used engine oil over coal ash into fuel-like products, Energy Fuel, 30, 204, 10.1021/acs.energyfuels.5b02316 Lü, 2006, Carbon distribution of n-paraffins in diesel and the effects on the sensitivity of flow improvers, Pet. Sci. Technol., 24, 1205, 10.1081/LFT-200053908 Lee, 2015, Application of waste plastic pyrolysis oil in a direct injection diesel engine: for a small scale non-grid electrification, Energy Environ. Res., 5, 18, 10.5539/eer.v5n1p18