Investigation of hybrid ion-exchange membranes reinforced with non-woven metal meshes for electro-dialysis applications

Juda, 1950, Coherent ion-exchange gels and membranes, J. Am. Chem. Soc., 72, 10.1021/ja01158a528 Xu, 2008, Electrodialysis-based separation technologies: a critical review, AIChE J., 54, 3147, 10.1002/aic.11643 Yaroslavtsev, 2009, Ion-exchange membrane materials: properties, modification, and practical application, Nanotechnol. Russia, 4, 137, 10.1134/S199507800903001X Strathmann, 2010, Electrodialysis, a mature technology with a multitude of new applications, Desalination, 264, 268, 10.1016/j.desal.2010.04.069 McGovern, 2014, The cost effectiveness of electrodialysis for diverse salinity applications, Desalination, 348, 57, 10.1016/j.desal.2014.06.010 Gärtner, 2005, Regeneration of mixed solvent by electrodialysis: selective removal of chloride and sulfate, J. Membr. Sci., 250, 113, 10.1016/j.memsci.2004.10.022 Ravikumar, 2013, Development of an electrodialysis–distillation integrated process for separation of hazardous sodium azide to recover valuable DMSO solvent from pharmaceutical effluent, Sep. Purif. Technol., 110, 20, 10.1016/j.seppur.2013.02.031 Dumée, 2012, Purification of aqueous amine solvents used in post combustion CO2 capture: a review, Int. J. Greenhouse Gas Control, 10, 443, 10.1016/j.ijggc.2012.07.005 de Groot, 2011, Electrodialysis for the concentration of ethanolamine salts, J. Membr. Sci., 371, 75, 10.1016/j.memsci.2011.01.023 Cheryan, 1995, Separation of glycerol and organic acids in model ethanol stillage by electrodialysis and precipitation, Process Biochem., 30, 17, 10.1016/0032-9592(95)87003-2 Xu, 2005, Ion exchange membranes: state of their development and perspective, J. Membr. Sci., 263, 1, 10.1016/j.memsci.2005.05.002 Penner, 1985, Ion transporting composite membranes: I. Nafion-impregnated Gore-tex, J. Electrochem. Soc., 132, 514, 10.1149/1.2113875 Yee, 2012, Cost effective cation exchange membranes: a review, Chem. Eng. Res. Des., 90, 950, 10.1016/j.cherd.2011.10.015 Yamaguchi, 2001, Hollow-fiber-type pore-filling membranes made by plasma-graft polymerization for the removal of chlorinated organics from water, J. Membr. Sci., 194, 217, 10.1016/S0376-7388(01)00545-2 Yamaguchi, 2003, Pore-filling type polymer electrolyte membranes for a direct methanol fuel cell, J. Membr. Sci., 214, 283, 10.1016/S0376-7388(02)00579-3 Yamaguchi, 1994, Preparation of pervaporation membranes for removal of dissolved organics from water by plasma-graft filling polymerization, J. Membr. Sci., 95, 39, 10.1016/0376-7388(94)85027-5 Chakrabarty, 2011, Stable ion-exchange membranes for water desalination by electrodialysis, Desalination, 282, 2, 10.1016/j.desal.2011.08.009 Kogure, 1997, Properties of new inorganic membranes prepared by metal alkoxide methods Part II: New inorganic–organic anion-exchange membranes prepared by the modified metal alkoxide methods with silane coupling agents, J. Membr. Sci., 126, 161, 10.1016/S0376-7388(96)00289-X Ohya, 1995, Properties of new inorganic membranes prepared by metal alkoxide methods Part I: A new permselective cation exchange membrane based on Si/Ta oxides, J. Membr. Sci., 105, 103, 10.1016/0376-7388(95)00054-G Seol, 2012, SiO2 ceramic nanoporous substrate-reinforced sulfonated poly(arylene ether sulfone) composite membranes for proton exchange membrane fuel cells, Int. J. Hydrogen Energy, 37, 6189, 10.1016/j.ijhydene.2011.06.085 Rana, 2013, Radioactive decontamination of water by membrane processes – a review, Desalination, 321, 77, 10.1016/j.desal.2012.11.007 Madaeni, 2012, Coke removal from petrochemical oily wastewater using γ-Al2O3 based ceramic microfiltration membrane, Desalination, 293, 87, 10.1016/j.desal.2012.02.028 T. Sata, Properties, characterization and microstructure of ion exchange membranes, in: Ion Exchange Membranes: Preparation, The Royal Society of Chemistry, 2004, pp. 89–134. Xu, 2008, A simple evaluation of microstructure and transport parameters of ion-exchange membranes from conductivity measurements, Sep. Purif. Technol., 60, 73, 10.1016/j.seppur.2007.07.049 Dumee, 2012, Activation of gold decorated carbon nanotube hybrids for targeted gas adsorption and enhanced catalytic oxidation, J. Mater. Chem., 22, 9374, 10.1039/c2jm16458b Dumee, 2013, The fabrication and surface functionalization of porous metal frameworks – a review, J. Mater. Chem. A, 1, 15185, 10.1039/c3ta13240d Enomoto, 2011, Degradation manner of polymer grafts chemically attached on thermally stable polymer films: swelling-induced detachment of hydrophilic grafts from hydrophobic polymer substrates in aqueous media, J. Mater. Chem., 21, 9343, 10.1039/c0jm04084c Suzuki, 2005, Characterization of oxide films generated on stainless steel in water vapor and oxygen plasmas, Surf. Coat. Technol., 200, 284, 10.1016/j.surfcoat.2005.02.013 Masmoudi, 2013, Hydrolysis process of γ-APS and characterization of silane film formed on copper in different conditions, Appl. Surf. Sci., 286, 71, 10.1016/j.apsusc.2013.09.018 Dumée, 2014, Qualitative spectroscopic characterization of the matrix–silane coupling agent interface across metal fibre reinforced ion exchange resin composite membranes, Vib. Spectrosc., 75, 203, 10.1016/j.vibspec.2014.05.011 Chambers, 2006, Modern approaches to marine antifouling coatings, Surf. Coat. Technol., 201, 3642, 10.1016/j.surfcoat.2006.08.129 Hu, 2011, Plasma-grafted alkaline anion-exchange membranes based on polyvinyl chloride for potential application in direct alcohol fuel cell, J. Power Sources, 196, 4483, 10.1016/j.jpowsour.2011.01.034 Hosseini, 2012, Fabrication of (polyvinyl chloride/cellulose acetate) electrodialysis heterogeneous cation exchange membrane: characterization and performance in desalination process, Desalination, 306, 51, 10.1016/j.desal.2012.07.028 Brydson, 1999 Conradi, 2012, Effect of silica/PVC composite coatings on steel-substrate corrosion protection, Prog. Org. Coat., 75, 392, 10.1016/j.porgcoat.2012.07.008 Subramonian, 1996, Anion-exchange resins from vinylbenzyl chloride: control of hydrolysis during polymerization, React. Funct. Polym., 29, 129, 10.1016/1381-5148(96)00003-X Hu, 2011, Plasma-polymerized alkaline anion-exchange membrane: synthesis and structure characterization, Thin Solid Films, 519, 2155, 10.1016/j.tsf.2010.11.028 Junaidi, 2014, The effects of solvents on the modification of SAPO-34 zeolite using 3-aminopropyl trimethoxy silane for the preparation of asymmetric polysulfone mixed matrix membrane in the application of CO2 separation, Micropor. Mesopor. Mat., 192, 52, 10.1016/j.micromeso.2013.10.006 Wang, 2012, Structure and corrosion resistance of a composite γ-amino propyl triethoxy silane and γ-glycidoxy propyl trimethoxy silane conversion coating on galvanized steel, J. Iron. Steel Res. Int., 19, 46, 10.1016/S1006-706X(13)60019-9 Zhang, 2014, In2S3 sensitized solar cells with a new passivation layer, J. Photochem. Photobiol., A, 281, 53, 10.1016/j.jphotochem.2014.02.012 Tanaka, 2007, Chapter 2 membrane property measurements, 17, 10.1016/S0927-5193(07)12002-7 Lin, 2013, A convenient, efficient and green route for preparing anion exchange membranes for potential application in alkaline fuel cells, J. Membr. Sci., 425–426, 190, 10.1016/j.memsci.2012.08.055 Merdaw, 2011, Mass transfer in pressure-driven membrane separation processes, Part I, Chem. Eng. J., 168, 215, 10.1016/j.cej.2010.12.071 Le, 2013, Contribution to the study of properties of Selemion AMV anion exchange membranes in acidic media, Electrochim. Acta, 108, 232, 10.1016/j.electacta.2013.07.011 Giffin, 2012, Interplay between the structure and relaxations in Selemion AMV hydroxide conducting membranes for AEMFC applications, J. Phys. Chem. C, 116, 23965, 10.1021/jp3094879 McCormick, 2007 Balster, 2005, Preparation and characterisation of monovalent ion selective cation exchange membranes based on sulphonated poly(ether ether ketone), J. Membr. Sci., 263, 137, 10.1016/j.memsci.2005.04.019 Zhou, 2012, Compressive properties of porous metal fiber sintered sheet produced by solid-state sintering process, Mater. Des., 35, 414, 10.1016/j.matdes.2011.09.026 Peckner, 1977 Meng, 2014, Effect of Cl− on the properties of the passive films formed on 316L stainless steel in acidic solution, J. Mater. Sci. Technol., 30, 253, 10.1016/j.jmst.2013.07.010 Ameer, 2004, Electrochemical behaviour of passive films on molybdenum-containing austenitic stainless steels in aqueous solutions, Electrochim. Acta, 50, 43, 10.1016/j.electacta.2004.07.011 van Ooij, 2006, Overview: the potential of silanes for chromate replacement in metal finishing industries, Silicon Chem., 3, 11, 10.1007/s11201-005-4407-6 Laycock, 1997, Localised dissolution kinetics, salt films and pitting potentials, Corros. Sci., 39, 1771, 10.1016/S0010-938X(97)00049-8 Suzuki, 2006, Dominant species for oxidation of stainless steel surface in water vapor plasma, Thin Solid Films, 506–507, 342, 10.1016/j.tsf.2005.08.079 Latifi, 2014, Plasma surface oxidation of 316L stainless steel for improving adhesion strength of silicone rubber coating to metal substrate, Appl. Surf. Sci., 320, 471, 10.1016/j.apsusc.2014.09.084 Wang, 2007, Water-barrier properties of mixed bis[trimethoxysilylpropyl]amine and vinyltriacetoxysilane films, J. Phys. Chem. B, 111, 7041, 10.1021/jp0679212 Stauffer, 1992 Karpenko-Jereb, 2009, Determination of structural, selective, electrokinetic and percolation characteristics of ion-exchange membranes from conductive data, Desalination, 245, 587, 10.1016/j.desal.2009.02.024 Dudek, 1992, Biased diffusion across ion-exchange membranes. Percolation theory approach, J. Membr. Sci., 67, 273, 10.1016/0376-7388(92)80030-N Güler, 2013, Performance-determining membrane properties in reverse electrodialysis, J. Membr. Sci., 446, 266, 10.1016/j.memsci.2013.06.045 Tuan, 2006, Properties of CMV cation exchange membranes in sulfuric acid media, J. Membr. Sci., 284, 67, 10.1016/j.memsci.2006.06.036 Le, 2009, On the structure–properties relationship of the AMV anion exchange membrane, J. Membr. Sci., 340, 133, 10.1016/j.memsci.2009.05.025 Zhang, 2012, Ion conductive spacers for the energy-saving production of the tartaric acid in bipolar membrane electrodialysis, J. Membr. Sci., 387–388, 48, 10.1016/j.memsci.2011.10.012 Pantoja, 2009, Analysis of hydrolysis process of γ-methacryloxypropyltrimethoxysilane and its influence on the formation of silane coatings on 6063 aluminum alloy, Appl. Surf. Sci., 255, 6386, 10.1016/j.apsusc.2009.02.022