On the study of keyhole-mode melting in selective laser melting process

Lim, 2016, An overview of 3-D printing in manufacturing, aerospace, and automotive industries, IEEE Potentials, 35, 18, 10.1109/MPOT.2016.2540098 Yadroitsau, 2009 Qiu, 2015, On the role of melt flow into the surface structure and porosity development during selective laser melting, Acta Mater., 96, 72, 10.1016/j.actamat.2015.06.004 Yadroitsev, 2011, Surface morphology in selective laser melting of metal powders, Phys. Procedia, 12, 264, 10.1016/j.phpro.2011.03.034 Scipioni Bertoli, 2017, On the limitations of volumetric energy density as a design parameter for selective laser melting, Mater. Des., 113, 331, 10.1016/j.matdes.2016.10.037 King, 2014, Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing, J. Mater. Process. Technol., 214, 2915, 10.1016/j.jmatprotec.2014.06.005 Eagar, 1983, Temperature fields produced by traveling distributed heat sources, Weld. J., 62, 346 Aboulkhair, 2016, On the formation of AlSi10Mg single tracks and layers in selective laser melting: microstructure and nano-mechanical properties, J. Mater. Process. Technol., 230, 88, 10.1016/j.jmatprotec.2015.11.016 Tang, 2018, A numerical investigation on the physical mechanisms of single track defects in selective laser melting, Int. J. Heat Mass Transf., 126, 957, 10.1016/j.ijheatmasstransfer.2018.06.073 Tan, 2018, A computational study on porosity evolution in parts produced by selective laser melting, Metall. Mater. Trans. A, 49, 3663, 10.1007/s11661-018-4697-x Khairallah, 2016, Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones, Acta Mater., 108, 36, 10.1016/j.actamat.2016.02.014 Lee, 2016, Modeling of heat transfer, fluid flow and solidification microstructure of Nickel-base superalloy fabricated by laser powder bed fusion, Addit. Manuf., vol. 12, 178, 10.1016/j.addma.2016.05.003 Panwisawas, 2017, Mesoscale modelling of selective laser melting: thermal fluid dynamics and microstructural evolution, Comput. Mater. Sci., 126, 479, 10.1016/j.commatsci.2016.10.011 Trapp, 2017, In situ absorptivity measurements of metallic powders during laser powder-bed fusion additive manufacturing, Appl. Mater. Today, 9, 341, 10.1016/j.apmt.2017.08.006 Le, 2018, A study on the influence of scanning strategies on the levelness of the melt track in selective laser melting process of stainless steel powder, JOM, 70, 2082, 10.1007/s11837-018-2998-6 Lin, 2017, Numerical study of keyhole dynamics and keyhole-induced porosity formation in remote laser welding of Al alloys, Int. J. Heat Mass Transf., 108, 244, 10.1016/j.ijheatmasstransfer.2016.12.019 Cho, 2010, “Numerical study of alloying element distribution in CO2 laser–GMA hybrid welding, Comput. Mater. Sci., 49, 792, 10.1016/j.commatsci.2010.06.025 Yang, 2018, Laser energy absorption behavior of powder particles using ray tracing method during selective laser melting additive manufacturing of aluminum alloy, Mater. Des., 143, 12, 10.1016/j.matdes.2018.01.043 Kloss, 2012, “Models, algorithms and validation for opensource DEM and CFD–DEM, Prog. Comput. Fluid Dynam. Int. J., 12, 140, 10.1504/PCFD.2012.047457 Weller, 1998, A tensorial approach to computational continuum mechanics using object-oriented techniques, Comput. Phys., 12, 620, 10.1063/1.168744 Rösler, 2011, Shell-and-Tube type latent heat thermal energy storage: numerical analysis and comparison with experiments, Heat Mass Transf., 47, 1027, 10.1007/s00231-011-0866-9 Cho, 2007, Understanding bead hump formation in gas metal arc welding using a numerical simulation, Metall. Mater. Trans. B, 38, 305, 10.1007/s11663-007-9034-5 Yan, 2017, Multi-physics modeling of single/multiple-track defect mechanisms in electron beam selective melting, Acta Mater., 134, 324, 10.1016/j.actamat.2017.05.061 Lee, 2002, Mechanism of keyhole formation and stability in stationary laser welding, J. Phys. D Appl. Phys., 35, 1570, 10.1088/0022-3727/35/13/320 Bobkov, 2008 Huang, 2018, Numerical study of keyhole instability and porosity formation mechanism in laser welding of aluminum alloy and steel, J. Mater. Process. Technol., 252, 421, 10.1016/j.jmatprotec.2017.10.011 Li, 2016, Numerical investigation of laser absorption by metal powder bed in selective laser sintering processes, 219 Gan, 2016, Practical support structures for selective laser melting, J. Mater. Process. Technol., 238, 474, 10.1016/j.jmatprotec.2016.08.006 Han, 2005, Thermal behavior and geometry model of melt pool in laser material process, J. Heat Transf., 127, 1005, 10.1115/1.2005275 Touloukian, 1970, Thermophysical properties of matter-the TPRC data series, volume 3, thermal conductivity-nonmetallic liquids and gases Kumar, 2006, Toward a unified model to prevent humping defects in gas tungsten arc welding, Weld. J. N.Y., 85, 292 Boley, 2015, Calculation of laser absorption by metal powders in additive manufacturing, Appl. Opt., 54, 2477, 10.1364/AO.54.002477 Shu, 2001, Sampled fiber bragg grating for simultaneous refractive-index and temperature measurement, Optic Lett., 26, 774, 10.1364/OL.26.000774 Cho, 2007, Theoretical analysis of keyhole dynamics in polarized laser drilling, J. Phys. D Appl. Phys., 40, 7638, 10.1088/0022-3727/40/24/007