Feasibility study for the manufacturing of hybrid pinion shafts with the cross-wedge rolling process
Tóm tắt
The Collaborative Research Center 1153 is investigating an innovative process chain for the production of hybrid components. The hybrid workpieces are first joined and then formed by cross-wedge rolling. Pinion shafts were manufactured to investigate the behavior of the joining zone under increased complexity of the forming process. For this purpose, six types of workpieces produced by three types of joining processes were formed into pinion shafts. The reference process provides a shaft with a smooth bearing seat. It was found that the increased complexity did not present any challenges compared to the reference processes. A near-net shape geometry was achieved for the pinions made of steel.
Tài liệu tham khảo
Buchmayr B (2015) Aktuelle entwicklungstrends und zukünftige herausforderungen im bereich der umformtechnik. Berg huettenmaenn monatsh 160:501–506. https://doi.org/10.1007/s00501-015-0402-1
Behrens B-A, Uhe J, Petersen T, Klose C, Thürer SE, Diefenbach J, Chugreeva A (2021) Challenges in the forging of steel-aluminum bearing bushings, materials 14(4). https://doi.org/10.3390/ma14040803
Pater Z (2014) Cross-wedge rolling, comprehensive materials processing 4:211–279. https://doi.org/10.1016/B978-0-08-096532-1.00315-0
Hoffmann H, Neugebauer R, Spur G (2012) Handbuch umformen, carl hanser verlag, münchen
Li Q, Lovell MR, Slaughter WS, Tagavi KA (2002) Investigation of the morphology of internal defects in cross wedge rolling. Journal of Materials Processing Technology 125:248–257
Gokcek M (2012) Mechanical engineering. Croatia, InTech. ISBN. 9535105051
Pater Z, Gontarz A, Tofil A (2011) Analysis of the cross-wedge rolling process of toothed shafts made from 2618 aluminium alloy. Journal of Shanghai Jiaotong University (Science) 16:162–166. https://doi.org/10.1007/s12204-011-1119-2
Doege E, Behrens B-A (2016) Handbuch umformtechnik. VDI-Buch. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-43891-6
Behrens B-A, Uhe J, Süer F, Duran D, Matthias T, Ross I (2021) Fabrication of steel-aluminium parts by impact extrusion. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2021.11.093
Ambroziak A, Korzeniowski M, Kustron P, Winnicki M, Sokołowski P, Harapinska E (2014 )Friction welding of aluminium and aluminium alloys with steel, advances in materials science and engineering. https://doi.org/10.1155/2014/981653
Behrens B-A, Chugreev A, Selinski M, Matthias T (2019) Joining zone shape optimisation for hybrid components made of aluminium-steel by geometrically adapted joining surfaces in the friction welding process, AIP Conference Proceedings, 2113, 040027. https://doi.org/10.1063/1.5112561
Hellfritzsch U, Lorenz B, Quaas J (2004) Werkzeug und verfahren zum querwalzen von verzahnungen sowie verfahren zur herstellung eines walzwerkzeuges, google patents, DE 100 66 177 A1. https://patents.google.com/patent/DE10066177B4/de
Budde L, Biester K, Merkel P et al (2022) Investigation of the material combination 20MnCr5 and X45CrSi9-3 in the tailored forming of shafts with bearing seats. Prod. Eng. Res. Devel. https://doi.org/10.1007/s11740-022-01119-w
Wang M, Xiang D, Xiao C, Zhou J, Jia Z (2012) Influence of cooling condition of tools on central deformation of workpiece and tool wear in cross wedge rolling, The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-011-3537-6
Idoyaga Z, Elvira R, Wendenbaum J, Meunier J, Robelet M, Toscanelli O, Reis M, Zachäus R, Lorenz B, Kolbe M (2008) Influence of tramp elements (P, Cu, S, Sn) on the mannesmann effect in the transversal hot rolling of engineering steels (MANNESTRAMP). Brussels: European Commission, Report of the Commission of the European Communities - EUR, Technical steel research, 23597
Rajinikanth V, Soni MK, Mahato B, Ananda Rao M (2019) Study of microstructural degradation of a failed pinion gear at a cement plant. Engineering Failure Analysis. https://doi.org/10.1016/j.engfailanal.2018.08.031