Effect of different grade levels of calcined clays on fresh and hardened properties of ternary-blended cementitious materials for 3D printing

Panda, 2019, Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing, J. Clean. Prod., 220, 610, 10.1016/j.jclepro.2019.02.185 Panda, 2019, Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application, Mater. Lett., 237, 348, 10.1016/j.matlet.2018.11.131 Bos, 2016, Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing, Virtual Phys. Prototyp., 11, 209, 10.1080/17452759.2016.1209867 Chen, 2019, The effect of viscosity-modifying admixture on the extrudability of limestone and calcined clay-based cementitious material for extrusion-based 3D concrete printing, Materials, 12, 1374, 10.3390/ma12091374 Nerella, 2019, Inline quantification of extrudability of cementitious materials for digital construction, Cement Concr. Compos., 95, 260, 10.1016/j.cemconcomp.2018.09.015 Zhu, 2019, Development of 3D printable engineered cementitious composites with ultra-high tensile ductility for digital construction, Mater. Des., 181, 108088, 10.1016/j.matdes.2019.108088 Reiter, 2018, The role of early age structural build-up in digital fabrication with concrete, Cement Concr. Res., 112, 86, 10.1016/j.cemconres.2018.05.011 Chen, 2017, A critical review of 3D concrete printing as a low CO 2 concrete approach, Heron, 62, 167 Chen, 2019, Feasibility of using low CO2 concrete alternatives in extrusion-based 3D concrete printing, 269 Ma, 2020, Real-time quantification of fresh and hardened mechanical property for 3D printing material by intellectualization with piezoelectric transducers, Construct. Build. Mater., 241, 117982, 10.1016/j.conbuildmat.2019.117982 Buswell, 2018, 3D printing using concrete extrusion: a roadmap for research, Cement Concr. Res., 112, 37, 10.1016/j.cemconres.2018.05.006 Nerella, 2020, Direct printing test for buildability of 3D-printable concrete considering economic viability, Autom. ConStruct., 109, 102986, 10.1016/j.autcon.2019.102986 Panda, 2019, Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay, Compos. B Eng., 165, 75, 10.1016/j.compositesb.2018.11.109 Chen, 2020, Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture, Cement Concr. Res., 132, 106040, 10.1016/j.cemconres.2020.106040 Panda, 2018, Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing, Cement Concr. Compos., 94, 307, 10.1016/j.cemconcomp.2018.10.002 Kazemian, 2017, Cementitious materials for construction-scale 3D printing: laboratory testing of fresh printing mixture, Construct. Build. Mater., 145, 639, 10.1016/j.conbuildmat.2017.04.015 Hosseini, 2019, A novel method to enhance the interlayer bonding of 3D printing concrete: an experimental and computational investigation, Cement Concr. Compos., 99, 112, 10.1016/j.cemconcomp.2019.03.008 Paul, 2018, A review of 3D concrete printing systems and materials properties: current status and future research prospects, Rapid Prototyp. J., 24, 10.1108/RPJ-09-2016-0154 Paul, 2018, Fresh and hardened properties of 3D printable cementitious materials for building and construction, Arch. Civ. Mech. Eng., 18, 311, 10.1016/j.acme.2017.02.008 Weng, 2018, Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model, Construct. Build. Mater., 163, 600, 10.1016/j.conbuildmat.2017.12.112 Liu, 2019, Mixture Design Approach to optimize the rheological properties of the material used in 3D cementitious material printing, Construct. Build. Mater., 198, 245, 10.1016/j.conbuildmat.2018.11.252 Zhou, 2005, Characterization of rheology of fresh fiber reinforced cementitious composites through ram extrusion, Mater. Struct. Constr., 38, 17, 10.1007/BF02480570 Chaves Figueiredo, 2019, An approach to develop printable strain hardening cementitious composites, Mater. Des., 169, 10.1016/j.matdes.2019.107651 Perrot, 2019, Extrusion of cement-based materials - an overview, RILEM Tech. Lett., 3, 91, 10.21809/rilemtechlett.2018.75 Perrot, 2012, Use of ram extruder as a combined rheo-tribometer to study the behaviour of high yield stress fluids at low strain rate, Rheol. Acta, 51, 743, 10.1007/s00397-012-0638-6 Zhou, 2013, Rheology of semi-solid fresh cement pastes and mortars in orifice extrusion, Cement Concr. Compos., 37, 304, 10.1016/j.cemconcomp.2013.01.004 Basterfield, 2005, On the interpretation of orifice extrusion data for viscoplastic materials, Chem. Eng. Sci., 60, 2599, 10.1016/j.ces.2004.12.019 Le, 2012, Mix design and fresh properties for high-performance printing concrete, Mater. Struct. Constr., 45, 1221, 10.1617/s11527-012-9828-z Ma, 2018, Printable properties of cementitious material containing copper tailings for extrusion based 3D printing, Construct. Build. Mater., 162, 613, 10.1016/j.conbuildmat.2017.12.051 Rahul, 2019, 3D printable concrete: mixture design and test methods, Cement Concr. Compos., 97, 13, 10.1016/j.cemconcomp.2018.12.014 Ma, 2018, Electromagnetic and microwave absorbing properties of cementitious composite for 3D printing containing waste copper solids, Cement Concr. Compos., 94, 215, 10.1016/j.cemconcomp.2018.09.005 Scrivener, 2018, Calcined clay limestone cements (LC3), Cement Concr. Res., 114, 49, 10.1016/j.cemconres.2017.08.017 Avet, 2016, Development of a new rapid, relevant and reliable (R3) test method to evaluate the pozzolanic reactivity of calcined kaolinitic clays, Cement Concr. Res., 85, 1, 10.1016/j.cemconres.2016.02.015 Huang, 2017, Effect of replacement of silica fume with calcined clay on the hydration and microstructural development of eco-UHPFRC, Mater. Des., 121, 36, 10.1016/j.matdes.2017.02.052 Dhandapani, 2017, Assessment of pore structure evolution in the limestone calcined clay cementitious system and its implications for performance, Cement Concr. Compos., 84, 36, 10.1016/j.cemconcomp.2017.08.012 Tironi, 2017, Blended cements with limestone filler and kaolinitic calcined clay: filler and pozzolanic effects, J. Mater. Civ. Eng., 29, 10.1061/(ASCE)MT.1943-5533.0001965 Alvarez, 2017, Microstructure, electrical and mechanical properties of steel fibres reinforced cement mortars with partial metakaolin and limestone addition, Construct. Build. Mater., 135, 8, 10.1016/j.conbuildmat.2016.12.170 Antoni, 2012, Cement substitution by a combination of metakaolin and limestone, Cement Concr. Res., 42, 1579, 10.1016/j.cemconres.2012.09.006 Avet, 2018, Investigation of the calcined kaolinite content on the hydration of limestone calcined clay cement (LC3), Cement Concr. Res., 107, 124, 10.1016/j.cemconres.2018.02.016 San Nicolas, 2013, Characteristics and applications of flash metakaolins, Appl. Clay Sci., 83–84, 253, 10.1016/j.clay.2013.08.036 Zhao, 2020, Microstructure of cement paste incorporating high volume of low-grade metakaolin, Cement Concr. Compos., 106, 103453, 10.1016/j.cemconcomp.2019.103453 Tregger, 2010, Influence of clays on the rheology of cement pastes, Cement Concr. Res., 40, 384, 10.1016/j.cemconres.2009.11.001 Muzenda, 2020, The role of limestone and calcined clay on the rheological properties of LC3, Cement Concr. Compos., 107, 103516, 10.1016/j.cemconcomp.2020.103516 Chen, 2019, Limestone and calcined clay-based sustainable cementitious materials for 3D concrete printing: a fundamental study of extrudability and early-age strength development, Appl. Sci., 9 Ferreiro, 2019, Influence of fineness of raw clay and calcination temperature on the performance of calcined clay-limestone blended cements, Appl. Clay Sci., 169, 81, 10.1016/j.clay.2018.12.021 Ferreiro, 2017, Effect of raw clay type, fineness, water-to-cement ratio and fly ash addition on workability and strength performance of calcined clay – limestone Portland cements, Cement Concr. Res., 101, 1, 10.1016/j.cemconres.2017.08.003 Skibsted, 2019, Reactivity of supplementary cementitious materials (SCMs) in cement blends, Cement Concr. Res., 124, 10.1016/j.cemconres.2019.105799 Beigh, 2019, Studying the rheological behavior of limestone calcined clay cement (LC3) mixtures in the context of extrusion-based 3D-printing, 1 Aramburo, 2019, Calcined clays for low carbon cement: rheological behaviour in fresh Portland cement pastes, Mater. Lett., 239, 24, 10.1016/j.matlet.2018.12.050 NEN-EN 196-2, 2013 Matschei, 2007, The role of calcium carbonate in cement hydration, Cement Concr. Res., 37, 551, 10.1016/j.cemconres.2006.10.013 Wolfs, 2019, Hardened properties of 3D printed concrete: the influence of process parameters on interlayer adhesion, Cement Concr. Res., 119, 132, 10.1016/j.cemconres.2019.02.017 Nerella, 2019, Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing, Construct. Build. Mater., 205, 586, 10.1016/j.conbuildmat.2019.01.235 NEN-EN 196-1, 2016 Çopuroğlu, 2016, Revealing the dark side of portlandite clusters in cement paste by circular polarization microscopy, Materials, 9, 10.3390/ma9030176 Chaves Figueiredo, 2019, Effect of viscosity modifier admixture on Portland cement paste hydration and microstructure, Construct. Build. Mater., 212, 818, 10.1016/j.conbuildmat.2019.04.020 Lothenbach, 2016, Thermogravimetric analysis, 177 Wolfs, 2017, A real-time height measurement and feedback system for 3D concrete printing Le, 2012, Hardened properties of high-performance printing concrete, Cement Concr. Res., 42, 558, 10.1016/j.cemconres.2011.12.003 Panda, 2017, Additive manufacturing of geopolymer for sustainable built environment, J. Clean. Prod., 167, 281, 10.1016/j.jclepro.2017.08.165 de Silva, 1990, Hydration of cements based on metakaolin: Thermochemistry, Adv. Cement Res., 3, 167, 10.1680/adcr.1990.3.12.167 Zunino, 2019, The influence of the filler effect on the sulfate requirement of blended cements, Cement Concr. Res., 126, 105918, 10.1016/j.cemconres.2019.105918 Bullard, 2011, Mechanisms of cement hydration, Cement Concr. Res., 41, 1208, 10.1016/j.cemconres.2010.09.011 Jansen, 2012, The early hydration of Ordinary Portland Cement (OPC): an approach comparing measured heat flow with calculated heat flow from QXRD, Cement Concr. Res., 42, 134, 10.1016/j.cemconres.2011.09.001 Roychand, 2016, High volume fly ash cement composite modified with nano silica, hydrated lime and set accelerator, Mater. Struct. Constr., 49, 1997, 10.1617/s11527-015-0629-z Berodier, 2014, Understanding the filler effect on the nucleation and growth of C-S-H, J. Am. Ceram. Soc., 97, 3764, 10.1111/jace.13177 Roussel, 2010, Steady state flow of cement suspensions: a micromechanical state of the art, Cement Concr. Res., 40, 77, 10.1016/j.cemconres.2009.08.026 De Larrard, 2005 Coussot, 2011 Hu, 1996, The rheology of fresh high-performance concrete, Cement Concr. Res., 26, 283, 10.1016/0008-8846(95)00213-8 Yahia, 2005, Rheological properties of highly flowable mortar containing limestone filler-effect of powder content and W/C ratio, Cement Concr. Res., 35, 532, 10.1016/j.cemconres.2004.05.008 Roussel, 2018, Rheological requirements for printable concretes, Cement Concr. Res., 112, 76, 10.1016/j.cemconres.2018.04.005 Roussel, 2012, The origins of thixotropy of fresh cement pastes, Cement Concr. Res., 42, 148, 10.1016/j.cemconres.2011.09.004 Perrot, 2016, Structural built-up of cement-based materials used for 3D-printing extrusion techniques, Mater. Struct., 49, 1213, 10.1617/s11527-015-0571-0 Wangler, 2016, Digital concrete: opportunities and challenges, RILEM Tech. Lett., 1, 67, 10.21809/rilemtechlett.2016.16 Lapeyre, 2018, Influence of pozzolanic additives on hydration mechanisms of tricalcium silicate, J. Am. Ceram. Soc., 101, 3557, 10.1111/jace.15518 Berodier, 2015 Costoya Fernandez, 2008 Liu, 2017, Towards understanding the influence of porosity on mechanical and fracture behaviour of quasi-brittle materials: experiments and modelling, Int. J. Fract., 205, 57, 10.1007/s10704-017-0181-7 Chen, 2020, Effect of printing parameters on interlayer bond strength of 3D printed limestone calcined clay-based cementitious material: An experimental and numerical study, Constr. Build. Mater., 262, 10.1016/j.conbuildmat.2020.120094 Tay, 2019, Time gap effect on bond strength of 3D-printed concrete, Virtual Phys. Prototyp., 14, 104, 10.1080/17452759.2018.1500420 Keita, 2019, Weak bond strength between successive layers in extrusion-based additive manufacturing: measurement and physical origin, Cement Concr. Res., 123, 105787, 10.1016/j.cemconres.2019.105787