Distribution of stress and strain between adjacent particles in particulate reinforced metal matrix composites

HUANG, 2013, Low volume fraction in situ (Ti5Si3+Ti2C)/Ti hybrid composites with network microstructure fabricated by reaction hot pressing of Ti-SiC system [J], Composites Science and Technology, 82, 23, 10.1016/j.compscitech.2013.03.025 SIVAKUMAR, 2017, Production and mechanical properties of nano SiC particle reinforced Ti-6Al-4V matrix composite [J], Transactions of Nonferrous Metals Society of China, 27, 82, 10.1016/S1003-6326(17)60009-8 WARD, 1996, Semi-solid processing of novel MMCs based on hypereutectic aluminium-silicon alloys [J], Acta Materialia, 44, 1717, 10.1016/1359-6454(95)00356-8 JEBEENMOSES, 2016, Prediction of influence of process parameters on tensile strength of AA6061/TiC aluminum matrix composites produced using stir casting [J], Transactions of Nonferrous Metals Society of China, 26, 1498, 10.1016/S1003-6326(16)64256-5 QI, 2016, The formation mechanism of TiC particles in TiC/Ni composites fabricated by in situ reactive infiltration [J], Journal of Materials Science, 51, 7038, 10.1007/s10853-016-9994-4 LI, 2016, Hot deformation behaviour of SiC/AA6061 composites prepared by spark plasma sintering [J], Journal of Materials Science & Technology, 32, 291, 10.1016/j.jmst.2015.12.006 SHARMAA, 2014, Thermal expansion behavior of Ni-Al2O3 composites with particulate and interpenetrating phase structures: An analysis using finite element method [J], Computational Material Science, 90, 130, 10.1016/j.commatsci.2014.04.008 LI, 2015, Sliding wear behavior of copper-based composites reinforced with graphene nanosheets and graphite [J], Transactions of Nonferrous Metals Society of China, 25, 3354, 10.1016/S1003-6326(15)63970-X JIAO, 2017, Effects of first-scale TiBw on secondary-scale Ti5Si3 characteristics and mechanical properties of in-situ (Ti5Si3+TiBw)/Ti6Al4V composites [J], Journal of Alloys and Compounds, 704, 269, 10.1016/j.jallcom.2017.02.044 WEBER, 2003, On the electrical conductivity of metal matrix composites containing high volume fractions of non-conducting inclusions [J], Acta Materialia, 51, 3199, 10.1016/S1359-6454(03)00141-1 TENG, 2016, Microstructures and properties of Al-50%SiC composites for electronic packaging applications [J], Transactions of Nonferrous Metals Society of China, 26, 2647, 10.1016/S1003-6326(16)64358-3 XIU, 2015, Microstructure and mechanical properties of 45 vol.% SiCp/7075Al composite [J], Journal of Materials Science & Technology, 31, 930, 10.1016/j.jmst.2015.01.012 JESHURUNLIJAY, 2016, Microstructure and mechanical properties characterization of AA6061/TiC aluminum matrix composites synthesized by in situ reaction of silicon carbide and potassium fluotitanate [J], Transactions of Nonferrous Metals Society of China, 26, 1791, 10.1016/S1003-6326(16)64255-3 MADEIRA, 2016, Damping capacity and dynamic modulus of hot pressed AlSi composites reinforced with different SiC particle sizes [J], Composites (Part B): Engineering, 90, 399, 10.1016/j.compositesb.2016.01.008 GARCÍA, 2015, A model for the prediction of debond onset in spherical-particle-reinforced composites under tension: Application of a coupled stress and energy criterion [J], Composites Science & Technology, 106, 60, 10.1016/j.compscitech.2014.10.010 PARK, 2008, Fracture toughness of microsphere Al2O3-Al particulate metal matrix composites [J], Composites (Part B): Engineering, 39, 1270, 10.1016/j.compositesb.2008.01.005 YUAN, 2014, Analysis of the stress states and interface damage in a particle reinforced composite based on a micromodel using cohesive elements [J], Materials Science and Engineering A, 589, 288, 10.1016/j.msea.2013.09.097 MENG, 2015, Prediction of interfacial strength and failure mechanisms in particle-reinforced metal-matrix composites based on a micromechanical model [J], Engineering Fracture Mechanics, 142, 170, 10.1016/j.engfracmech.2015.06.001 WILLIAMS, 2012, Three dimensional (3D) microstructure-based modeling of interfacial decohesion in particle reinforced metal matrix composites [J], Materials Science and Engineering A, 557, 113, 10.1016/j.msea.2012.05.108 SU, 2014, Composite structure modeling and mechanical behavior of particle reinforced metal matrix composites [J], Materials Science and Engineering A, 597, 359, 10.1016/j.msea.2014.01.024 PARK, 2011, Cohesive zone models: A critical review of traction-separation relationships across fracture surfaces [J], Applied Mechanics Reviews, 64, 060802, 10.1115/1.4023110 YUAN, 2016, Are the cohesive zone models necessary for delamination analysis? [J], Computer Methods in Applied Mechanics and Engineering, 310, 567, 10.1016/j.cma.2016.06.023 DANDEKAR, 2011, Molecular dynamics based cohesive zone law for describing Al-SiC interface mechanics [J], Composites (Part A): Applied Science and Manufacturing, 42, 355, 10.1016/j.compositesa.2010.12.005 KANETAKE, 1995, Continuous observation of microstructural degradation during tensile loading of particle reinforced aluminium matrix composites [J], Materials Science & Technology, 11, 1246, 10.1179/mst.1995.11.12.1246 JAMALI, 2010, Architecturally modified Al-DRA composites: The effect of size and shape of the DRA rods on fracture behavior [J], Journal of Materials Science, 45, 2852, 10.1007/s10853-010-4273-2 SONG, 2008, Modeling the fracture toughness and tensile ductility of SiCp/Al metal matrix composites [J], Materials Science and Engineering A, 474, 371, 10.1016/j.msea.2007.05.075 WANG, 2011, Effects of particle size and distribution on the mechanical properties of SiC reinforced Al-Cu alloy composites [J], Materials Science and Engineering A, 528, 1131, 10.1016/j.msea.2010.11.028 HU, 2014, Mechanical properties and damping capacity of SiCp/TiNif/Al composite with different volume fractions of SiC particle [J], Composites (Part B): Engineering, 66, 400, 10.1016/j.compositesb.2014.06.013 SONG, 2008, Effects of particle size on the fracture toughness of SiCp/Al alloy metal matrix composites [J], Materials Science and Engineering A, 488, 601, 10.1016/j.msea.2008.03.022 CHEN, 2017, Mechanical properties and fracture behavior of Mg-Al/AlN composites with different particle contents [J], Journal of Materials Science & Technology, 33, 668 CONLON, 2001, Effect of particle distribution on deformation and damage of two-phase alloys [J], Materials Science and Engineering A, 317, 108, 10.1016/S0921-5093(01)01168-6