Tensile strain and damage self-sensing of flax FRP laminates using carbon nanofiber conductive network coupled with acoustic emission

Saidane, 2017, Damage mechanisms assessment of hybrid flax-glass fibre composites using acoustic emission, Compos Struct, 174, 1, 10.1016/j.compstruct.2017.04.044 Habibi, 2017, Combining short flax fiber mats and unidirectional flax yarns for composite applications: Effect of short flax fibers on biaxial mechanical properties and damage behaviour, Compos Part B Eng, 123, 165, 10.1016/j.compositesb.2017.05.023 Le Duigou, 2011, Environmental impact analysis of the production of flax fibres to be used as composite material reinforcement, J Biobased Mater Bioenergy, 5, 153, 10.1166/jbmb.2011.1116 Stamboulis, 2001, Effects of environmental conditions on mechanical and physical properties of flax fibers, Compos Part A Appl Sci Manuf, 32, 1105, 10.1016/S1359-835X(01)00032-X Wang, 2020, Compressive behavior of circular sawdust-reinforced ice-filled flax FRP tubular short columns, Materials, 13, 957, 10.3390/ma13040957 Satyanarayana, 2009, Biodegradable composites based on lignocellulosic fibers-An overview, Prog Polym Sci, 34, 982, 10.1016/j.progpolymsci.2008.12.002 Yan, 2013, Crashworthiness characteristics of flax fibre reinforced epoxy tubes for energy absorption application, Mater Des, 51, 629, 10.1016/j.matdes.2013.04.014 Huang, 2016, Reinforced concrete beams strengthened with externally bonded natural flax FRP plates, Compos Part B Eng, 91, 569, 10.1016/j.compositesb.2016.02.014 Sliseris, 2016, Numerical modelling of flax short fibre reinforced and flax fibre fabric reinforced polymer composites, Compos Part B Eng, 89, 143, 10.1016/j.compositesb.2015.11.038 Wang, 2021, Hygrothermal ageing behavior and mechanism of carbon nanofibers modified flax fiber-reinforced epoxy laminates, Compos Part A, 140, 106142, 10.1016/j.compositesa.2020.106142 Scida, 2017, Influence of the scattering of flax fibres properties on flax/epoxy woven ply stiffness, Mater Des, 122, 136, 10.1016/j.matdes.2017.02.094 Loutas, 2009, Health monitoring of carbon/carbon, woven reinforced composites. Damage assessment by using advanced signal processing techniques. Part I: Acoustic emission monitoring and damage mechanisms evolution, Compos Sci Technol, 69, 265, 10.1016/j.compscitech.2008.07.020 Hatta, 2005, Damage detection of C/C composites using ESPI and SQUID techniques, Compos Sci Technol, 65, 1098, 10.1016/j.compscitech.2004.11.017 Wang, 2021, Axial compressive behavior and confinement mechanism of circular FRP-steel tubed concrete stub columns, Compos Struct, 256, 113082, 10.1016/j.compstruct.2020.113082 Wang, 2020, Monotonic axial compressive behaviour and confinement mechanism of square CFRP-steel tube confined concrete, Eng Struct, 217, 110802, 10.1016/j.engstruct.2020.110802 Lefeuvre, 2014, Elementary flax fibre tensile properties: Correlation between stress-strain behaviour and fibre composition, Ind Crops Prod, 52, 762, 10.1016/j.indcrop.2013.11.043 Placet, 2014, Nonlinear tensile behaviour of elementary hemp fibres. Part I: Investigation of the possible origins using repeated progressive loading with in situ microscopic observations, Compos Part A Appl Sci Manuf, 56, 319, 10.1016/j.compositesa.2012.11.019 Azwa, 2013, A review on the degradability of polymeric composites based on natural fibres, Mater Des, 47, 424, 10.1016/j.matdes.2012.11.025 Le Duigou, 2015, In-situ evaluation of flax fibre degradation during water ageing, Ind Crop Prod, 70, 204, 10.1016/j.indcrop.2015.03.049 Ma, 2017, Numerical prediction of effective electro-elastic properties of three-dimensional braided piezoelectric ceramic composites, Compos Struct, 180, 420, 10.1016/j.compstruct.2017.07.081 Chen, 2021, Behavior and design-oriented model for elliptical FRP-confined concrete under axial compression, Eng Struct, 249, 113387, 10.1016/j.engstruct.2021.113387 Du, 2019, Fracture mechanism and damage evaluation of FRP/steel–concrete hybrid girder using acoustic emission technique, J Mater Civ Eng, 31, 04019111, 10.1061/(ASCE)MT.1943-5533.0002758 Li, 2016, Identification of failure mechanisms for CFRP-confined circular concrete-filled steel tubular columns through acoustic emission signals, Smart Struct Syst, 18, 525, 10.12989/sss.2016.18.3.525 Liu, 2012, A study on the failure mechanisms of carbon fiber/epoxy composite laminates using acoustic emission, Mater Des, 37, 228, 10.1016/j.matdes.2011.12.015 Njuhovic, 2015, Identification of failure mechanisms of metallised glass fibre reinforced composites under tensile loading using acoustic emission analysis, Compos Part B Eng, 81, 1, 10.1016/j.compositesb.2015.06.018 Njuhovic, 2014, Identification of interface failure mechanisms of metallized glass fibre reinforced composites using acoustic emission analysis, Compos Part B Eng, 66, 443, 10.1016/j.compositesb.2014.06.018 Davidovitz, 1984, Failure modes and fracture mechanisms in flexure of Kevlar-epoxy composites, J Mater Sci, 19, 377, 10.1007/BF02403223 Oz, 2017, Do high frequency acoustic emission events always represent fibre failure in CFRP laminates?, Compos Part A, 103, 230, 10.1016/j.compositesa.2017.10.013 Barile, 2019, Experimental wavelet analysis of acoustic emission signal propagation in CFRP, Eng Fract Mech, 210, 400, 10.1016/j.engfracmech.2018.05.030 Finkel, 2000, Experimental study of ‘Auto Sensor Test-Self Test Mode’ for acoustic emission system performance verification, AIP Conf Proc, 509, 1995, 10.1063/1.1291316 Barile, 2020, Application of different acoustic emission descriptors in damage assessment of fiber reinforced plastics: A comprehensive review, Eng Fract Mech, 235, 107083, 10.1016/j.engfracmech.2020.107083 Li, 2017, Damage analysis of carbon nanofiber modified flax fiber composite by acoustic emission, Smart Struct Syst, 19, 127, 10.12989/sss.2017.19.2.127 Barbulée, 2014, Damage to flax fibre slivers under monotonic uniaxial tensile loading, Compos Part A Appl Sci Manuf, 64, 107, 10.1016/j.compositesa.2014.04.024 Assarar, 2016, Acoustic emission characterization of damage in short hemp fiber reinforced polypropylene composites, Polym Compos, 37, 1101, 10.1002/pc.23272 Wang, 2017, Strain and damage self-sensing properties of carbon nanofibers/carbon fiber-reinforced polymer laminates, Adv Mech Eng, 9, 10.1177/1687814016688641 Schueler, 2001, Damage detection in CFRP by electrical conductivity mapping, Compos Sci Technol, 61, 921, 10.1016/S0266-3538(00)00178-0 Wang, 1996, Continuous carbon fibre epoxy-matrix composite as a sensor of its own strain, Smart Mater Struct, 5, 796, 10.1088/0964-1726/5/6/009 Wang, 2006, Self-sensing of flexural strain and damage in carbon fiber polymer-matrix composite by electrical resistance measurement, Carbon, 44, 2739, 10.1016/j.carbon.2006.03.034 Wang, 2018, Strain monitoring of concrete components using embedded carbon nanofibers/epoxy sensors, Constr Build Mater, 186, 367, 10.1016/j.conbuildmat.2018.07.147 Nam, 2017, Mechanical properties and piezoresistive sensing capabilities of FRP composites incorporating CNT fibers, Compos Struct, 178, 1, 10.1016/j.compstruct.2017.07.008 Alexopoulos, 2010, Structural health monitoring of glass fiber reinforced composites using embedded carbon nanotube (CNT) fibers, Compos Sci Technol, 70, 260, 10.1016/j.compscitech.2009.10.017 Gao, 2010, Glass fibers with carbon nanotube networks as multifunctional sensors, Adv Funct Mater, 20, 1885, 10.1002/adfm.201000283 Monteiro, 2017, A pressure-sensitive carbon black cement composite for traffic monitoring, Constr Build Mater, 154, 1079, 10.1016/j.conbuildmat.2017.08.053 Allaoui, 2008, The electronic transport properties and microstructure of carbon nanofiber/epoxy composites, Compos Sci Technol, 68, 410, 10.1016/j.compscitech.2007.06.028 Yang, 2018, Damage sensing in multi-functional hybrid natural fiber composites under shear loading, Smart Mater Struct, 27, 115034, 10.1088/1361-665X/aae7f2 Wang, 2020, Behavior of circular ice-filled self-luminous FRP tubular stub columns under axial compression, Constr Build Mater, 232, 117287, 10.1016/j.conbuildmat.2019.117287 Yan, 2014, Flax fibre and its composites - A review, Compos Part B Eng, 56, 296, 10.1016/j.compositesb.2013.08.014 Wang, 2021, Behavior and modeling of circular large rupture strain FRP-confined ice under axial compression, J Compos Constr, 25, 04020076, 10.1061/(ASCE)CC.1943-5614.0001094 Park, 2010, Self-sensing of carbon fiber/carbon nanofiber–epoxy composites with two different nanofiber aspect ratios investigated by electrical resistance and wettability measurements, Compos Part A, 41, 1702, 10.1016/j.compositesa.2010.08.005 Liu, 2017, A biomimetic approach to improve the dispersibility, interfacial interactions and toughening effects of carbon nanofibers in epoxy composites, Compos Part B, 113, 197, 10.1016/j.compositesb.2017.01.040 Wang, 2018, Properties and mechanisms of self-sensing carbon nanofibers/epoxy composites for structural health monitoring, Compos Struct, 200, 669, 10.1016/j.compstruct.2018.05.151 Xiang, 2018, Damage self-sensing behavior of carbon nanofiller reinforced polymer composites with different conductive network structures, Polymer, 158, 308, 10.1016/j.polymer.2018.11.007 Chung, 2020, A critical review of piezoresistivity and its application in electrical-resistance-based strain sensing, J Mater Sci, 55, 15367, 10.1007/s10853-020-05099-z Caminero, 2019, Tensile and flexural damage response of symmetric angle-ply carbon fiber-reinforced epoxy laminates: non-linear response and effects of thickness and ply-stacking sequence, Polym Compos, 40, 3678, 10.1002/pc.25230 Fuller, 2015, Pseudo-ductility and damage suppression in thin ply CFRP angle-ply laminates, Compos Part A, 69, 64, 10.1016/j.compositesa.2014.11.004 Wang, 2018, Strain and damage self-sensing of basalt fiber reinforced polymer laminates fabricated with carbon nanofibers/epoxy composites under tension, Compos Part A, 113, 40, 10.1016/j.compositesa.2018.07.017 Wang, 2018, In situ strain and damage monitoring of GFRP laminates incorporating carbon nanofibers under tension, Polymers (Basel), 10, 777, 10.3390/polym10070777 Gao, 2009, Sensing of damage mechanisms in fiber-reinforced composites under cyclic loading using carbon nanotubes, Adv Funct Mater, 19, 123, 10.1002/adfm.200800865 Skoczylas, 2021, A multilateral study on the FRP Composite’s matrix strength and damage growth resistance, Compos Struct, 263, 113752, 10.1016/j.compstruct.2021.113752 Philippidis, 2008, Strength degradation due to fatigue-induced matrix cracking in FRP composites: An acoustic emission predictive model, Compos Sci Technol, 68, 3272, 10.1016/j.compscitech.2008.08.020 Fu, 2020, Micro-mechanical analysis of matrix crack-induced delamination in cross-ply laminates in tension, Compos Struct, 243, 112202, 10.1016/j.compstruct.2020.112202 Kashtalyan, 2002, Analysis of local delaminations in composite laminates with angle-ply matrix cracks, Int J Solids Struct, 39, 1515, 10.1016/S0020-7683(02)00007-0 Rezaei Jafari, 2021, The effect of staggered matrix crack induced delamination growth on the mechanical properties of cross-ply laminates, Compos Struct, 272, 114196, 10.1016/j.compstruct.2021.114196 Gao, 2009, Coupled carbon nanotube network and acoustic emission monitoring for sensing of damage development in composites, Carbon, 47, 1381, 10.1016/j.carbon.2009.01.030 Dong, 2016, Electrically conductive behaviors and mechanisms of short-cut super-fine stainless wire reinforced reactive powder concrete, Cem Concr Compos, 72, 48, 10.1016/j.cemconcomp.2016.05.022 Amjadi, 2015, Ultra-stretchable and skin-mountable strain sensors using carbon nanotubes–Ecoflex nanocomposites, Nanotechnology, 26, 375501, 10.1088/0957-4484/26/37/375501