Performance characteristics of concrete based on a ternary calcium sulfoaluminate–anhydrite–fly ash cement

Ioannou, 2014, Properties of a ternary calcium sulfoaluminate-calcium sulfate-fly ash cement, Cem Concr Res, 56, 75, 10.1016/j.cemconres.2013.09.015 OECD/IEA and The World Business Council for Sustainable Development. Cement technology Roadmap 2009 – Carbon emissions reductions up to 2050. Switzerland: Atar Roto Presse SA. <http://www.wbcsd.org/> [Last accessed 24 Jul 12]. WBCSD AND IEA. Cement roadmap targets. Paris: IEA Publications. <http://www.iea.org/papers/2009/Cement_Roadmap_targets_viewing.pdf> [Accessed 4 Apr 2012]. Lawrence, 2002, The production of low-energy cements Janotka, 1999, An experimental study on the upgrade of sulfoaluminate belite cement systems by blending with Portland cement, Adv Cem Res, 11, 35, 10.1680/adcr.1999.11.1.35 Gartner E. Are there any practical alternatives to the manufacture of Portland cement clinker? In: Proceedings of the 11th International Conference on Non-conventional Materials and Technologies NOCMAT. University of Bath, Bath, September 6–9, 2009. Juenger, 2010, Advances in alternative cementitious binders, Cem Concr Res, 41, 1232, 10.1016/j.cemconres.2010.11.012 Pera, 2003, New applications of calcium sulfoaluminate cement, Cem Concr Res, 34, 671, 10.1016/j.cemconres.2003.10.019 Quillin, 2001 Kalogris, 2000, A quantitative study on the influence of non-expansive sulfoaluminate cement on the corrosion of steel reinforcement, Cem Concr Res, 30, 1731, 10.1016/S0008-8846(00)00277-5 Zhang L, Glasser F. New concretes based on calcium sulfoaluminate cement. In: Dhir RK, Dyer D, editors. Modern Concrete Materials: Binders, Additions and Admixtures. Thomas Telford, London, pp. 261–274. Zhang L. Microstructure and performance of calcium sulfoaluminate cements. PhD Thesis. Aberdeen, University of Aberdeen, 2000. Dachtar J. Calcium Sulfoaluminate Cement as Binder for Structural Concrete. PhD Thesis. Sheffield, University of Sheffield, 2004. Quillin, 2007 BS EN 206:2013. Concrete: Specification, performance, production and conformity. British Standards Institution. Teychenne DC, Franklin, RE, Ertnroy HC. Design of normal concrete mixes. In: 2nd ed. amended by Marsh BK. Watford: Building Research Establishment, 1997. BS 1881-125: 2013 Testing Concrete – Methods for mixing and sampling fresh concrete in the laboratory. British Standards Institution. BS EN 12350-2:2009. Testing fresh concrete. Slump-test. British Standards Institution. BS EN 12390-3:2009. Testing hardened concrete. Compressive strength of test specimens. British Standards Institution. BS 1881-121:1983. Testing concrete. Method for determination of static modulus of elasticity in compression. British Standards Institution. CEN/TS 12390-12:2010. Testing hardened concrete- Part 12: Determination of potential carbonation resistance of concrete: Accelerated carbonation method I. European Committee for Standardization. ASTM C 1585-04: Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes. ASTM International. DD CEN/TS 12390-11:2010. Testing hardened concrete. Determination of the chloride resistance of concrete, unidirectional diffusion. British Standards Institution. Roberts, 1986 Dhir, 2004, Role of cement content in the specification for durability of concrete: cement type influences, Proc Institut Civil Eng: Struct Build, 157, 113 Glasser, 2000, Calculation of chemical water demand for hydration of calcium sulfoaluminate cement, J Chin Ceram Soc, 25, 340 Mehta, 2006 Jiang, 2000, A model for predicting carbonation of high-volume fly ash concrete, Cem Concr Res, 30, 699, 10.1016/S0008-8846(00)00227-1 Newman J, Choo BS. Advanced Concrete Technology: Concrete Properties. Oxford: Butterworth – Heinemann, 2003. Claisse, 1999, Permeability and pore volume of carbonated concrete, ACI Mater J, 96, 378 Johannesson, 2001, Microstructural changes caused by carbonation of cement mortar, Cem Concr Res, 31, 925, 10.1016/S0008-8846(01)00498-7 Florea, 2012, Chloride binding related to hydration products – Part I: Ordinary Portland cement, Cem Concr Res, 42, 290, 10.1016/j.cemconres.2011.09.016 Hirao, 2004, Chloride binding of cement estimated by binding isotherms of hydrates, J Adv Concr Technol, 3, 77, 10.3151/jact.3.77 Ekolu, 2006, Pessimum effect of externally applied chlorides on expansion due to delayed ettringite formation: proposed mechanism, Cem Concr Res, 36, 688, 10.1016/j.cemconres.2005.11.020 Elakneswaran, 2009, Influence of surface charge on ingress of chloride ion in hardened pastes, Mater Struct, 42, 83, 10.1617/s11527-008-9368-8 Ioannou S. An assessment of the performance of calcium sulfoaluminate and supersulfated cements for use in concrete. PhD Thesis. Bath, University of Bath, 2013.