Application of the nonsmooth dynamics approach to model and analysis of the contact-impact events in cam-follower systems

Wittenberg, J.: Dynamics of Systems of Rigid Bodies. Teubner, Stuttgart (1977)

Nikravesh, P.E.: Computer-Aided Analysis of Mechanical Systems. Prentice Hall, Englewood Cliffs (1988)

Haug, E.J.: Computer-Aided Kinematics and Dynamics of Mechanical Systems—Volume I: Basic Methods. Allyn & Bacon, Boston (1989)

Shabana, A.A.: Dynamics of Multibody Systems. Wiley, New York (1989)

Huston, R.L.: Multibody Dynamics. Butterworth-Heinemann, Boston (1990)

Rulka, W.: SIMPACK—a computer program for simulation of large motion multibody systems. In: Schiehlen, W. (ed.) Multibody Systems Handbook, pp. 265–284. Springer, Berlin (1990)

Ryan, R.R.: ADAMS—Multibody System Analysis Software. Multibody Systems Handbook. Springer, Berlin (1990)

Jiménez, J.M., Avello, A., García-Alonso, A., and Jalón, J.G.: COMPAMM—A Simple and Efficient Code for Kinematic and Dynamic Numerical Simulation of 3-D Multibody System with Realistic Graphics. Multibody Systems Handbook. Springer, Berlin (1990)

Hurmuzlu, Y., Marghitu, D.B.: Rigid body collision of planar kinematic chain with multiple contact points. Int. J. Robot. Res. 13, 82–89 (1994)

Keller, J.B.: Impact with friction. Journal of Applied Mechanics 531(4) (1986)

Han, I., Gilmore, B.J.: Multi body impact motion with friction analysis, simulation, and validation. J. Mech. Des. 115, 412–422 (1993)

Pereira, M., Nikravesh, P.: Impact dynamics of multibody systems with frictional contact using joint coordinates and canonical equations of motion. Nonlinear Dyn. 9, 53–71 (1996)

Haug, E.J., Wu, S.C., Yang, S.M.: Dynamics of mechanical systems with coulomb friction, stiction, impact and constraint addition deletion—I theory. Mech. Mach. Theory 21, 401–406 (1986)

Flores, P., Leine, R., Glocker, C.: Modeling and analysis of rigid multibody systems with translational clearance joints based on the nonsmooth dynamics approach. Multibody Syst. Dyn. 23(2), 165–190 (2010)

Tian, Q., Liu, C., Machado, M., Flores, P.: A new model for dry and lubricated cylindrical joints with clearance in spatial flexible multibody systems. Nonlinear Dyn. 64(1–2), 25–47 (2011)

Erkaya, S., Uzmay, I.: Investigation on effect of joint clearance on dynamics of four-bar mechanism. Nonlinear Dyn. 58(1–2), 179–198 (2009)

Ishida, Y., Inagaki, M., Ejima, R., Hayashi, A.: Nonlinear resonances and self-excited oscillations of a rotor caused by radial clearance and collision. Nonlinear Dyn. 57(4), 593–605 (2009)

Flores, P., Lankarani, H.M.: Spatial rigid-multi-body systems with lubricated spherical clearance joints: modeling and simulation. Nonlinear Dyn. 60(1–2), 99–114 (2010)

Machado, M., Flores, P., Claro, J.C.P., Ambrósio, J., Silva, M., Completo, A., Lankarani, H.M.: Development of a planar multi-body model of the human knee joint. Nonlinear Dyn. 60(3), 459–478 (2010)

Brutti, C., Coglitore, C., Valentini, P.P.: Modeling 3D revolute joint with clearance and contact stiffness. Nonlinear Dyn. 66(4), 531–548 (2011)

Kim, S., Nikravesh, P.E., Gim, G.: A two-dimensional tire model on uneven roads for vehicle dynamic simulation. Veh. Syst. Dyn. 56(10), 913–930 (2008)

Pombo, J.C., Ambrósio, J.A.C.: Application of a wheel–rail contact model to railway dynamics in small radius curved tracks. Multibody Syst. Dyn. 19(1–2), 91–114 (2008)

Miller, A., Allen, P., Santos, V., Valero-Cuevas, F.: From robotic hands to human hands: a visualization and simulation engine for grasping research. Ind. Robot 32(1), 55–63 (2005)

Ciocarlie, M., Miller, A., Allen, P.: Grasp analysis using deformable fingers. In: Intelligent Robots and Systems, pp. 4122–4128 (2005)

Miller, A.T., Christensen, H.I.: Implementation of multi-rigid-body dynamics within a robotic grasping simulator. In: Proceedings of the 2003 IEEE International Conference on Robotics and Automation, Taipei, Taiwan, 14–19 September, pp. 2262–2268 (2003)

Flores, P., Machado, M., Silva, M.T., Martins, J.M.: On the continuous contact force models for soft materials in multibody dynamics. Multibody Syst. Dyn. 25(3), 357–375 (2011)

Flores, P.: Modeling and simulation of wear in revolute clearance joints in multibody systems. Mech. Mach. Theory 44(6), 1211–1222 (2009)

Mukras, S., Kim, N.H., Mauntler, N.A., Schmitz, T.L., Sawyer, W.G.: Analysis of planar multibody systems with revolute joint wear. Wear 268(5–6), 643–652 (2010)

Lankarani, H.M., Nikravesh, P.E.: A contact force model with hysteresis damping for impact analysis of multibody systems. J. Mech. Des. 112, 369–376 (1990)

Flores, P., Ambrósio, J.: On the contact detection for contact-impact analysis in multibody systems. Multibody Syst. Dyn. 24(1), 103–122 (2010)

Flores, P.: A parametric study on the dynamic response of planar multibody systems with multiple clearance joints. Nonlinear Dyn. 61(4), 633–653 (2010)

Pfeiffer, F., Glocker, C.: Multibody Dynamics with Unilateral Contacts. Wiley, New York (1996)

Glocker, C.: Set-Valued Force Laws: Dynamics of Non-Smooth Systems. Lecture Notes in Applied Mechanics, vol. 1. Springer, Berlin (2001)

Potra, F.A., Anitescu, M., Gavrea, B., Trinkle, J.: A linearly implicit trapezoidal method for integrating stiff multibody dynamics with contact, joints, and friction. Int. J. Numer. Methods Eng. 66(7), 1079–1124 (2006)

Dimitrakopolous, E.G.: Analysis of a frictional oblique impact observed in skew bridges. Nonlinear Dyn. 60(4), 575–595 (2010)

Glocker, C., Pfeiffer, F.: Dynamical systems with unilateral contacts. Nonlinear Dyn. 3(4), 245–259 (1992)

Glocker, C., Pfeiffer, F.: Multiple impacts with friction in rigid multibody systems. Nonlinear Dyn. 7(4), 471–497 (1995)

Moreau, J.J.: Numerical aspects of the sweeping process. Comput. Methods Appl. Mech. Eng. 177(3–4), 329–349 (1999)

Pfeiffer, F.: Unilateral problems of dynamics. Arch. Appl. Mech. 69(8), 503–527 (1999)

Bauchau, O.A., Rodriguez, J., Bottasso, C.J.: Modeling of unilateral contact conditions with application to aerospace systems involving backlash, freeplay and friction. Mech. Res. Commun. 28(5), 571–599 (2001)

Stewart, D.E.: Finite-dimensional contact mechanics. Philos. Trans. R. Soc., Math. Phys. Eng. Sci. 359(1789), 2467–2482 (2001)

Pfeiffer, F.: The idea of complementarity in multibody dynamics. Arch. Appl. Mech. 72(11–12), 807–816 (2003)

Förg, M., Pfeiffer, F., Ulbrich, H.: Simulation of unilateral constrained systems with many bodies. Multibody Syst. Dyn. 14(2), 137–154 (2005)

Glocker, C., Studer, C.: Formulation and preparation for numerical evaluation of linear complementarity systems in dynamics. Multibody Syst. Dyn. 13(4), 447–463 (2005)

Slavic, J., Boltezar, M.: Non-linearity and non-smoothness in multi-body dynamics: application to woodpecker toy. Proceedings of the institution of mechanical engineers, part C. J. Mech. Eng. Sci. 220(3), 285–296 (2006)

Leine, R.I., van de Wouw, N.: Stability properties of equilibrium sets of non-linear mechanical systems with dry friction and impact. Nonlinear Dyn. 51(4), 551–583 (2008)

Studer, C., Leine, R.I., Glocker, C.: Step size adjustment and extrapolation for time-stepping schemes in non-smooth dynamics. Int. J. Numer. Methods Eng. 76(11), 1747–1781 (2008)

Brogliato, B., ten Dam, A.A., Paoli, L., Genot, F., Abadie, M.: Numerical simulations of finite dimensional multibody nonsmooth mechanical systems. Appl. Mech. Rev. 55(2), 107–150 (2002)

Leine, R.I., Nijmeijer, H.: Dynamics and Bifurcations of Non-Smooth Mechanical Systems. Lecture Notes in Applied and Computational Mechanics, vol. 18. Springer, Berlin (2004)

Anitescu, M., Potra, F.A.: Formulating dynamic multi-rigid-body contact problems with friction as solvable linear complementarity problems. Nonlinear Dyn. 14(3), 231–247 (2007)

Brogliato, B.: Some perspectives on the analysis and control of complementarity systems. IEEE Trans. Autom. Control 48(6), 918–935 (2003)

Flores, P.: Contact-impact analysis in multibody systems based on the nonsmooth dynamics approach. Post Doctoral Report, ETH-Zurich Switzerland (2009)

Signorini, A.: Sopra alcune questioni di elastostatica. Atti della Societa Italian per il Progresso della Scienza (1933)

Leine, R.I., Glocker, C.: A set-valued force law for spatial Coulomb–Contensou friction. Eur. J. Mech. A, Solids 22(2), 193–216 (2003)

Greenwood, D.T.: Principles of Dynamics. Prentice Hall, Englewood Cliffs (1965)

Moreau, J.J.: Unilateral contact and dry friction in finite freedom dynamics. In: Moreau, J.J., Panagiotopoulos, P.D. (eds.) Non-Smooth Mechanics and Applications. CISM Courses and Lectures, vol. 302, pp. 1–82. Springer, Wien (1988)

Glocker, C.: On frictionless impact models in rigid-body systems. Philos. Trans. R. Soc., Math. Phys. Eng. Sci. 359(1789), 2385–2404 (2001)

Pfeiffer, F., Foerg, M., Ulbrich, H.: Numerical aspects of non-smooth multibody dynamics. Comput. Methods Appl. Mech. Eng. 195(50–51), 6891–6908 (2006)

Leine, R.I., van de Wouw, N.: Stability and Convergence of Mechanical Systems with Unilateral Constraints. Lecture Notes in Applied and Computational Mechanics, vol. 36. Springer, Berlin (2008)

Rockafellar, R.T.: Augmented lagrangians and applications of the proximal point algorithm in convex programming. Math. Oper. Res. 1(2), 97–116 (1976)

Alart, P., Curnier, A.: A mixed formulation for frictional contact problems prone to newton like solution methods. Comput. Methods Appl. Mech. Eng. 92(3), 353–375 (1991)

Studer, C., Glocker, C.: Solving normal cone inclusion problems in contact mechanics by iterative methods. J. Syst. Des. Dyn. 1(3), 458–467 (2007)

Foerg, M., Geier, T., Neumann, L., Ulbrich, H.: r-Factor strategies for the augmented Lagrangian approach in multi-body contact mechanics. In: Proceedings of III European Conference on Computational Mechanics, Lisbon, Portugal (2006), 20 p.

Seabra, E., Flores, P., Silva, J.F.: Theoretical and experimental analysis of an industrial cutting file machine using multibody systems methodology. In: Proceedings of ECCOMAS Thematic Conference Multibody Dynamics 2007, Milan, 25–28 June, 2007 (2007), 12 p.

Seabra, E.A.R., Flores, P., Claro, J.C.P., Silva, J.C.L.: Kinematics and dynamics study of the cam-follower mechanism of the cutting file machine. In: Internationales Wissenschaftliches Kolloquium, Technische Universität Ilmenau, September 23–26, 2002 (2002), 12 p.

Seabra, E.A.R., Flores, P., Silva, J.C.L.F.: Re-design of a cam-follower mechanism of an industrial cutting file machine. In: Third International Conference on Advanced Engineering Design, Prague, Czech Republic, June 1–4, 2003, (2003), 8 p.

Chen, F.Y.: Mechanics and Design of Cam Mechanisms. Pergamon, New York (1982)

Norton, R.L.: Cam Design and Manufacturing Handbook. Industrial Press, Inc., New York (2002)