Effect of loading rates on pullout behavior of high strength steel fibers embedded in ultra-high performance concrete

Naaman, 1991, Bond-slip mechanisms of steel fibers in concrete, ACI Mater. J., 135 Banthia, 1990, A study of some factors affecting the fiber-matrix bond in steel fiber reinforced concrete, Can. J. Civ. Eng., 610, 10.1139/l90-069 Sujiravorakul, 2001 Robins, 2002, Pull-out behavior of hooked steel fibers, Mater. Struct., 35, 434, 10.1007/BF02483148 Kim, 2008, Loading rate effect on pullout behavior deformed steel fibers, ACI Mater. J., 576 Cunha, 2010, Pullout behavior of steel fibers in self-compacting concrete, J. Mater. Civ. Eng. ASCE, 1 Wille, 2012, Pullout behavior of high-strength steel fibers embedded in ultra-high performance concrete, ACI Mater. J., 479 Gokoz, 1981, Effect of strain rate on the pull-out behavior of fibers in mortar, Int. J. Cem. Compos., 187, 10.1016/0262-5075(81)90051-8 Bindiganavile, 2005, Impact response of the fiber-matrix bond in concrete, Can. J. Civ. Eng., 924, 10.1139/l05-039 Banthia, 1991, Deformed steel fiber-cementitious matrix bond under impact, Cem. Concr. Res., 21, 158, 10.1016/0008-8846(91)90042-G Abu-Lebdeh, 2010, Rate Effect on Pullout Behavior of Steel Fibers Embedded in Very-High Strength Concrete, Am. J. Eng. Appl. Sci., 3, 454, 10.3844/ajeassp.2010.454.463 Alwan, 1999, Effect of Mechanical Clamping on the Pull-Out Response of Hooked Steel Fibers Embedded in Cementitious Matrices, Concr. Sci. Eng., 1, 15 Wille, 2012, Concrete strength dependent pull-out behaviour of deformed steel fibers, 69 Smith, 2014, Discrete modeling of ultra-high-performance concrete with application to projectile penetration, Int. J. Impact Eng., 65, 13, 10.1016/j.ijimpeng.2013.10.008 Wille, 2013, Effect of ultra-high-performance concrete on pullout behavior of high-strength brass-coated straight fibers, ACI Mater. J., 451 Wille, 2011, Ultra-high performance concrete with compressive strength exceeding 150 MPa (22kis): a simpler way, ACI Mater. J., 46 Wille, 2012, Ultra-high performance concrete and fiber reinforced concrete: achieving strength and ductility without heat treatment, Mater. Struct., 45, 309, 10.1617/s11527-011-9767-0 Wille, 2011, Strain-hardening UHP-FRC with low fiber contents, Mater. Struct., 44, 583, 10.1617/s11527-010-9650-4 Wille, 2014, Properties of strain hardening ultra-high performance fiber reinforced concrete (UHP-FRC) under direct tensile loading, Cem. Concr. Compos., 48, 53, 10.1016/j.cemconcomp.2013.12.015 Zhong, R., Wille, K., Equal Arc Segment Method for Averaging Data Plots Exemplified for Averaging Stress versus Strain Curves of Pervious Concrete, ASCE Journal of Materials in Civil Engineering, 10.1061/(ASCE)MT.1943-5533.0001345, 04015071. Li, 1990, Effect of inclining angle, bundling and surface treatment on synthetic fiber pull-out from a cement matrix, Composites, 132, 10.1016/0010-4361(90)90005-H Lee, 2010, Pullout behavior of inclined steel fiber in an ultra-high strength cementitious matrix, Constr. Build. Mater., 2030, 10.1016/j.conbuildmat.2010.03.009