Fabrication, experimental study and testing of a novel photovoltaic module for photovoltaic thermal applications

Armstrong, 2010, A thermal model for photovoltaic panels under varying atmospheric conditions, Appl. Therm. Eng., 30, 1488, 10.1016/j.applthermaleng.2010.03.012 Lu, 2007, Energy analysis of silicon solar cell modules based on an optical model for arbitrary layers, Sol. Energy, 81, 636, 10.1016/j.solener.2006.08.014 Dupeyrat, 2011, Improvement of PV module optical properties for PV-thermal hybrid collector application, Sol. Energy Mater. Sol. Cells, 95, 2028, 10.1016/j.solmat.2011.04.036 Alonso Garcia, 2004, Estimation of photovoltaic module yearly temperature and performance based on nominal operation cell temperature calculations, Renew. Energy, 29, 1997, 10.1016/j.renene.2004.03.010 Secchi, 2012, Effect of a back surface roughness on annual performance of an air-cooled PV module Dupeyrat, 2011, Efficient single glazed flat plate photovoltaic-thermal hybrid collector for domestic hot water system, Sol. Energy, 85, 1457, 10.1016/j.solener.2011.04.002 Royne, 2005, Cooling of photovoltaic cells under concentrated illumination: a critical review, Sol. Energy Mater. Sol. Cells, 86, 451, 10.1016/j.solmat.2004.09.003 Corbin, 2009, Modeling, testing and evaluation of building-integrated photovoltaic-thermal collectors, 319 Zondag, 1999, Thermal and electrical yield of a combi-panel, vol. 3, 96 Zondag, 2004, PV-thermal collector development – an overview of the lessons learnt Pascal Affolter, Wolfgang Eisermann, Hubert Fechner, Matthias Rommel, Anton Schaap, Henrik Sorensen, Yiannis Tripanagnostopoulos, Herbert Zondag. PVT Roadmap/A European Guide for the Development and Market Introduction of PV-Thermal Technology. Contract No. 502775 (SES6). Dubey, 2008, Thermal modeling of a combined system of photovoltaic thermal (PV/T) solar water heater, Sol. energy, 82, 602, 10.1016/j.solener.2008.02.005 Fernandez, 2014, Calculation of the cell temperature of a high concentrator photovoltaic (HCPV) module: A study and comparison of different methods, Sol. Energy Mater. Sol. Cells, 121, 144, 10.1016/j.solmat.2013.11.009 Tiwari, 2006, Performance evaluation of photovoltaic thermal solar air collector for composite climate of India, Sol. Energy Mater. Sol. Cells, 90, 175, 10.1016/j.solmat.2005.03.002 Tonui, 2007, Air-cooled PV/T solar collectors with low cost performance improvements, Sol. Energy, 81, 498, 10.1016/j.solener.2006.08.002 Hussain, 2013, Design development and performance evaluation of photovoltaic/thermal (PV/T) air base solar collector, Renew. Sustain. Energy Rev., 25, 431, 10.1016/j.rser.2013.04.014 Tonui, 2007, Improved PV/T solar collectors with heat extraction by forced or natural air circulation, Renew. Energy, 32, 623, 10.1016/j.renene.2006.03.006 Kumar, 2011, Performance evaluation of a double pass PV/T solar air heater with and without fins, Appl. Therm. Eng., 31, 1402, 10.1016/j.applthermaleng.2010.12.037 Tonui, 2008, Performance improvement of PV/T solar collectors with natural air flow operation, Sol. Energy, 82, 1, 10.1016/j.solener.2007.06.004 Dubey, 2014, The theoretical modeling and optimization of a 10 kWp photovoltaic thermal system for a student hostel in singapore, Int. J. Green Energy, 11, 225, 10.1080/15435075.2013.769880 Daghigh, 2011, Predicting the performance of amorphous and crystalline silicon based photovoltaic solar thermal collectors, Energy Convers. Manag., 52, 1741, 10.1016/j.enconman.2010.10.039 Dubey, 2008, Thermal modeling of a combined system of photovoltaic thermal (PV/T) solar water heater, Sol. Energy, 82, 602, 10.1016/j.solener.2008.02.005 Mishra, 2013, Energy and exergy analysis of hybrid photovoltaic thermal water collector for constant collection temperature mode, Sol. Energy, 90, 58, 10.1016/j.solener.2012.12.022 Kumar, 2013, Thermal modeling of a hybrid photovoltaic thermal water heater in parallel configuration, Int. J. Sustain. Energy, 32, 277, 10.1080/14786451.2011.644627 Pei, 2013, An experimental study on a novel heat pipe-type photovoltaic/thermal system with and without a glass cover, Int. J. Green Energy, 10, 72, 10.1080/15435075.2011.651752 Zondag, 2003, The yield of different combined PV-thermal collector designs, Sol. Energy, 74, 253, 10.1016/S0038-092X(03)00121-X Fujisawa, 1997, Annual exergy evaluation on photovoltaic-thermal hybrid collector, Sol. Energy Mater. Sol. Cells, 47, 135, 10.1016/S0927-0248(97)00034-2 Zakharchenko, 2004, Photovoltaic solar panel for a hybrid PV/thermal system, Sol. Energy Mater. Sol. Cells, 82, 253, 10.1016/j.solmat.2004.01.022 Chaabane, 2013, Performance evaluation of concentrating solar photovoltaic and photovoltaic/thermal systems, Sol. Energy, 98, 315, 10.1016/j.solener.2013.09.029 Joao, 2013, Modelling and analysis of photovoltaic/thermal collectors – influence of PV cell location and area, Int. J. Ambient energy Robles-Ocampo, 2007, Photovoltaic/thermal solar hybrid system with bifacial PV module and transparent plane collector, Sol. Energy Mater. Sol. Cells, 91, 1966, 10.1016/j.solmat.2007.08.005 Rajoria, 2012, Overall thermal energy and exergy analysis of hybrid photovoltaic thermal array, Sol. Energy, 86, 1531, 10.1016/j.solener.2012.02.014 Tiwari, 2007, Embodied energy analysis of hybrid photovoltaic thermal (PV/T) water collector, Int. J. Ambient Energy, 28, 181, 10.1080/01430750.2007.9675042 Tina, 2008, Experimental verification of thermal behavior of photovoltaic modules, 579 King, 2004