Predicting the performance of large diameter circular saws based on Schmidt hammer and other properties for some Turkish carbonate rocks

Burgess RB Circular sawing granite with diamond saw blades. In: Proceedings of the fifth industrial diamond seminar; 1978. p. 3–10. Hausberger, 1989, Causes of the different behaviour of rocks when machined with diamond tools, Ind Diamond Rev, 3, 1 Ceylanoglu A, Gorgulu K The performance measurement results of stone cutting machines and their relations with some material properties. In: Proceedings of the sixth international symposium on mine planning and equipment selection, Ostrava, Czech Republic; 1997. p. 393–8. Brook, 2002, Principles of diamond tool technology for sawing rock, Int J Rock Mech Min Sci, 39, 41, 10.1016/S1365-1609(02)00007-2 Wie, 2003, Study on the fuzzy ranking of granite sawability, J Mater Process Technol, 139, 277, 10.1016/S0924-0136(03)00235-8 Gunaydin, 2004, Sawability prediction of carbonate rocks from brittleness indexes, J S Afr Inst Min Metall, 104, 239 Kahraman, 2004, Predicting the sawability of carbonate rocks using multiple curvilinear regression analysis, Int J Rock Mech Min Sci, 41, 1123, 10.1016/j.ijrmms.2004.04.009 Norling RG. Mechanical properties and the composition of some Swedish natural stone types and their effect on cutting results. In: Presentation at the conference on diamond in the construction and stone industry, Germany; 1971. Clausen, 1996, Characteristics of acoustic emission during single diamond scratching of granite, Ind Diamond Rev, 3, 96 Konstanty, 2002, Theoretical analysis of stone sawing with diamonds, J Mater Process Technol, 123, 146, 10.1016/S0924-0136(02)00071-7 Zhang, 2003, A new method of grading the sawability of natural rock materials, Key Eng Mater, 250, 293, 10.4028/www.scientific.net/KEM.250.293 Kahraman, 2006, Sawability prediction of carbonate rocks from shear strength parameters using artificial neural networks, Int J Rock Mech Min Sci, 43, 157, 10.1016/j.ijrmms.2005.04.007 Delgado, 2005, The influence of microhardness on the sawability of Pink Porrino granite (Spain), Int J Rock Mech Min Sci, 42, 161, 10.1016/j.ijrmms.2004.08.010 Tutmez, 2007, Multifactorial fuzzy approach to the sawability classification of building stones, Constr Build Mater, 21, 1672, 10.1016/j.conbuildmat.2006.05.023 Ribeiro, 2007, Sawing of blocks of siliceous dimension stone: influence of texture and mineralogy, Bull Eng Geol Environ, 66, 101, 10.1007/s10064-006-0049-y Kahraman, 2008, Indentation test to estimate the sawability of carbonate rocks, Bull Eng Geol Environ, 67, 507, 10.1007/s10064-008-0162-1 Guney, 2011, Performance prediction of large-diameter circular saws based on surface hardness tests for Mugla (Turkey) marbles, Rock Mech Rock Eng, 44, 357, 10.1007/s00603-010-0119-0 International Society of Rock Mechanics (ISRM), 1981 Hucka, 1965, A rapid method for determining the strength of rocks in-situ, Int J Rock Mech Min Sci, 2, 127, 10.1016/0148-9062(65)90009-4 Deer DU, Miller RP Engineering classification and index properties of intact rock. Report AFWL-TR-116. New Mexico: Air Force Weapons Laboratory; 1996. Kidybinski, 1968, Rebound number and the quality of mine roof strata, Int J Rock Mech Min Sci, 5, 283, 10.1016/0148-9062(68)90001-6 Fowell RJ, McFeat-Smith I Factors influencing the cutting performance of a selective tunnelling machine. In: Proceedings of the international symposium IMM (Tunelling’76), London; 1976. p. 301–9. Young, 1978, Assessing rock discontinuities, Tunnels Tunnelling, 10, 45 Poole, 1980, Consistency and repeatability of Schmidt hammer rebound data during field-testing, Int J Rock Mech Min Sci Geomech Abstr, 17, 167, 10.1016/0148-9062(80)91363-7 Sachpazis, 1990, Correlating Schmidt hardness with compressive strength and Young’s modulus of carbonate rock, Bull Int Assoc Eng Geol, 42, 75, 10.1007/BF02592622 Goktan, 1993, A Suggested improvement to the Schmidt rebound hardness ISRM suggested method with particular reference to rock machineability, Int J Rock Mech Min Sci Geomech Abstr, 30, 321, 10.1016/0148-9062(93)92733-7 Kahraman, 2001, Evaluation of simple methods for assessing the uniaxial compressive strength of rocks, Int J Rock Mech Min Sci, 38, 981, 10.1016/S1365-1609(01)00039-9 Bilgin, 2002, The performance prediction of impact hammers from Schmidt hammer rebound values in Istanbul metro tunnel drivages, Tunnelling Underground Space Technol, 17, 237, 10.1016/S0886-7798(02)00009-3 Goktan, 2005, A comparative study of Schmidt hammer testing procedures with reference to rock cutting machine performance prediction, Int J Rock Mech Min Sci, 42, 466, 10.1016/j.ijrmms.2004.12.002 Ozkan, 2008, A new approach for applying the in-situ Schmidt hammer test on a coal face, Int J Rock Mech Min Sci, 45, 888, 10.1016/j.ijrmms.2007.09.012 American Society for Testing and Materials (ASTM). Standard test method for laboratory determination of abrasiveness of rock using the CERCHAR method. ASTM D7625-10; 2010. Thuro K, Singer J, Kasling H, Bauer M Determining abrasivity with the LCPC test. In: Proceedings of the first Canada–U.S. rock mechanics symposium, Vancouver, BC, Canada; 2007. p. 27–31. Bamford, 1978, ISRM Commission on Standardization of Laboratory and Field Tests Suggested methods for determining hardness and abrasiveness of rocks, Int J Rock Mech Min Sci Geomech Abstr, 15, 89, 10.1016/0148-9062(78)90002-5 Copur, 2001, Specific energy as a criterion for the use of rapid excavation systems in Turkish mines, Min Technol: IMM Trans Sect A, 110(A), 149, 10.1179/mnt.2001.110.3.149 Copur, 2003, A set of indices based on indentation tests for assessment of rock cutting performance and rock properties, J S Afr Inst Min Metall, 103, 589 Copur, 2010, Linear stone cutting tests with chisel tools for identification of cutting principles and predicting performance of chain saw machines, Int J Rock Mech Min Sci, 47, 104, 10.1016/j.ijrmms.2009.09.006 Copur, 2011, Field and laboratory studies on natural stones leading to empirical performance prediction of chain saw machines, Int J Rock Mech Min Sci, 48, 269, 10.1016/j.ijrmms.2010.11.011 Balci, 2012, Investigation into the effects of different rocks on rock cuttability by a V-type disc cutter, Tunnelling Underground Space Technol, 30, 183, 10.1016/j.tust.2012.02.018 Copur, 2014, Predicting performance of EPB TBMs by using a stochastic model implemented into a deterministic model, Tunnelling Underground Space Technol, 42, 1, 10.1016/j.tust.2014.01.006 Kahraman, 2003, Dominant rock properties affecting the penetration rate of percussive drills, Int J Rock Mech Min Sci, 40, 711, 10.1016/S1365-1609(03)00063-7 Yagiz, 2009, Assessment of brittleness using rock strength and density with punch penetration test, Tunnelling Underground Space Technol, 24, 66, 10.1016/j.tust.2008.04.002 Altindag, 2010, Predicting the relationships between brittleness and mechanical properties (UCS, TS and SH) of rocks, Sci Res Essays, 5, 2107 Tumac, 2007, Estimation of rock cuttability from Shore hardness and compressive strength properties, Rock Mech Rock Eng, 40, 477, 10.1007/s00603-006-0108-5 Tumac, 2014, Predicting the performance of chain saw machines based on Shore scleroscope hardness, Rock Mech Rock Eng, 47, 703, 10.1007/s00603-013-0416-5 Gehring, 1995, Leistungs-und Verschleißprognosen im maschinellen Tunnelbau, Felsbau, 13, 439 Aleman, 1983, Prediction of cutting rates for boom type roadheaders, Tunnels Tunnelling, 15, 23 Howarth, 1986, Correlation of model tunnel boring and drilling machine performances with rock properties, Int J Rock Mech Min Sci, 23, 171, 10.1016/0148-9062(86)90344-X Howarth DF Mechanical rock excavation-assessment of cuttability and borability. In: Proceedings of the rapid excavation and tunnelling conference (RETC’87), New Orleans, LA; 1987. p. 145–64. West, 1989, Rock abrasiveness testing for tunnelling, Int J Rock Mech Min Sci, 26, 151, 10.1016/0148-9062(89)90003-X Fener, 2007, Performance prediction of circular saws from mechanical rock properties in cutting carbonate rocks, Rock Mech Rock Eng, 40, 505, 10.1007/s00603-006-0110-y SPSS® v.21 IBM Statistics Data Editor. (Licensed by Istanbul Technical University, Turkey). Stoodley, 1980, 35 Montgomery, 1999, 388 Tumac D, Copur H, Balci C The investigation of the effects of rock textural properties on brittleness and cuttability. TUBITAK project—initial report—112M860. Istanbul Technical University, Mining Engineering Department; 2014. (in Turkish with English abstract). Sayin, 2013 Oz, 2014