A novel method for enhancing interface strength of TiC coated layer/Ti substrate

Freese, 2001 Leyens, 2003 Lutjering, 2007 Boyer, 1994 Abderrazak, 2011, Spark plasma sintering consolidation of nanostructured TiC prepared by mechanical alloying, Int. J. Refract. Met. Hard Mater., 29, 170, 10.1016/j.ijrmhm.2010.10.003 Bramaa, 2007, Effect of titanium carbide coating on the osseointegration response in vitro and in vivo, Biomaterials, 28, 595, 10.1016/j.biomaterials.2006.08.018 Boonruang, 2010, Fast processing technique for TiC coatings on titanium, Chiang Mai J .Sci., 37, 206 Li, 2001, Structural characterization of TiCx films prepared by plasma based ion implantation, Thin Solid Films, 396, 16, 10.1016/S0040-6090(01)01227-5 Kusano, 1999, Titanium carbide film deposition by DC magnetron reactive sputtering using a solid carbon source, Thin Solid Films, 343–344, 254, 10.1016/S0040-6090(98)01638-1 Kusano, 1999, Preparation of TiC films by alternate deposition of Ti and C layers using a dual magnetron sputtering source, Surf. Coat. Technol., 120–121, 378, 10.1016/S0257-8972(99)00388-6 Maa, 2003, Structure of titanium films implanted with carbon by plasma-based ion implantation, Surf. Coat. Technol., 169–170, 375, 10.1016/S0257-8972(03)00047-1 Lópeza, 2001, Investigation of TiC thin films synthesised by low energy IBAD from electron evaporation of TiC powder, Appl. Surf. Sci., 172, 110, 10.1016/S0169-4332(00)00835-7 Saba, 2013, Preparing TiC coating on AISI D2 steel using mechanical milling technique, Powder Technol., 246, 229, 10.1016/j.powtec.2013.05.031 Di Fonzo, 2008, Growth regimes in pulsed laser deposition of aluminum oxide films, Appl. Phys. A, 93, 765, 10.1007/s00339-008-4720-y Back, 2013, Pulsed-laser deposited transition-metal carbides for field-emission cathode coatings, ACS Appl. Mater. Interface, 5, 9241, 10.1021/am403362w Ferré, 2013, The mechanical properties of a nanocrystalline Al2O3/a-Al2O3 composite coating measured by nanoindentation and Brillouin spectroscopy, Acta Mater., 61, 2662, 10.1016/j.actamat.2013.01.050 Romankov, 2009, Fabrication of TiN coatings using mechanical milling techniques, Int. J. Refract. Met. Hard Mater., 27, 492, 10.1016/j.ijrmhm.2008.10.005 Romankov, 2009, TEM study of TiN coatings fabricated by mechanical milling using vibration technique, Surf. Coat. Technol., 203, 1879, 10.1016/j.surfcoat.2009.01.011 Gupta, 2009, In situ nanocrystalline Fe–Si coating by mechanical alloying, J. Alloy. Compd., 482, 118, 10.1016/j.jallcom.2009.04.048 Leng, 2008 Romankov, 2009, Effect of process parameters on the formation of Ti–Al coatings fabricated by mechanical milling, J. Alloy. Compd., 484, 665, 10.1016/j.jallcom.2009.05.016 Suryanarayana, 2001, Mechanical alloying and milling, Prog. Mater Sci., 46, 1, 10.1016/S0079-6425(99)00010-9 Pouriamanesh, 2009, Coating of Al substrate by metallic Ni through mechanical alloying, J. Alloy. Compd., 488, 430, 10.1016/j.jallcom.2009.08.150 Chen, 2013, Fabrication of Ti–Cu–Al coatings with amorphous microstructure on Ti–6Al–4V alloy substrate via high-energy mechanical alloying method, Surf. Coat. Technol., 236, 485, 10.1016/j.surfcoat.2013.10.043 Li, 2012, Preparation of Ti–Cr and Ti–Cu flame-retardant coatings on Ti–6Al–4V using a high-energy mechanical alloying method: a preliminary research, Mater. Des., 35, 25, 10.1016/j.matdes.2011.09.017