High-temperature deformation and interfacial damage in CGI: 3D numerical analysis

Andriollo, 2016, A micro-mechanical analysis of thermo-elastic properties and local residual stresses in ductile iron based on a new anisotropic model for the graphite nodules, Modelling and Simulation in Materials Science and Engineering, 24, 55012, 10.1088/0965-0393/24/5/055012 Andriollo, 2015, Modeling of damage in ductile cast iron - The effect of including plasticity in the graphite nodules, IOP Conference Series: Materials Science and Engineering, 84, 12027, 10.1088/1757-899X/84/1/012027 Andriollo, 2019, Impact of micro-scale residual stress on in-situ tensile testing of ductile cast iron: Digital volume correlation vs. model with fully resolved microstructure vs. periodic unit cell, Journal of the Mechanics and Physics of Solids, 125, 714, 10.1016/j.jmps.2019.01.021 Behera, 2012, A novel material used in automotive industry: compacted graphite iron, Materials Research, 1, 1 Collini, 2019, Modeling the influence of stress triaxiality on the failure strain of nodular cast iron microstructures, Procedia Structural Integrity, 18, 671, 10.1016/j.prostr.2019.08.215 Dawson, 2008, 19 Drago, 2007, Micro-macromechanical analysis of heterogeneous materials: Macroscopically homogeneous vs periodic microstructures, Composites Science and Technology, 67, 1243, 10.1016/j.compscitech.2006.02.031 Endo, 2014, Effects of small defects, matrix structures and loading conditions on the fatigue strength of ductile cast irons, Theoretical and Applied Fracture Mechanics, 69, 34, 10.1016/j.tafmec.2013.12.005 Frishmuth, 1976, Failure analysis of cast irons under general three-dimensional stress states, Journal of Engineering Materials and Technology, 98, 69, 10.1115/1.3443339 Garoz, 2019, Consistent application of periodic boundary conditions in implicit and explicit finite element simulations of damage in composites, Composites Part B: Engineering, 168, 254, 10.1016/j.compositesb.2018.12.023 Hill, 1963, Elastic properties of reinforced solids: Some theoretical principles, Journal of the Mechanics and Physics of Solids, 11, 357, 10.1016/0022-5096(63)90036-X Hooputra, 2004, A comprehensive failure model for crashworthiness simulation of aluminium extrusions, International Journal of Crashworthiness, 9, 449, 10.1533/ijcr.2004.0289 Kohout, 2001, A simple relation for deviation of grey and nodular cast irons from Hooke's law, Materials Science and Engineering: A, 313, 16, 10.1016/S0921-5093(01)01145-5 Omairey, 2019, Development of an ABAQUS plugin tool for periodic RVE homogenisation, Engineering with Computers, 35, 567, 10.1007/s00366-018-0616-4 Palkanoglou, 2022, Thermal debonding of inclusions in compacted graphite iron: effect of matrix phases, Engineering Failure Analysis Qiu, 2016, Influence of thermal exposure on microstructure evolution and tensile fracture behaviors of compacted graphite iron, Materials Science and Engineering: A, 664, 75, 10.1016/j.msea.2016.03.118 Qiu, 2016, Transition of tensile strength and damaging mechanisms of compacted graphite iron with temperature, Materials Science and Engineering: A, 677, 290, 10.1016/j.msea.2016.09.035 Seleš, 2021, Microcrack propagation under monotonic and cyclic loading conditions using generalised phase-field formulation, Engineering Fracture Mechanics, 255, 10.1016/j.engfracmech.2021.107973 Selin, 2010, Tensile and thermal properties in compacted graphite irons at elevated temperatures, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 41, 3100, 10.1007/s11661-010-0385-1 Yang, 2021, Tensile properties and damage mechanisms of compacted graphite iron based on microstructural simulation, Materials Science and Engineering: A, 814 Yue, 2019, Thermal conductivity analysis of compacted graphite cast iron after a creep test, Metallurgical and Materials Transactions A, 50, 3697, 10.1007/s11661-019-05278-x