Performance of Warm Mix Asphalt containing Sasobit®: State-of-the-art

Zapata, 2005, Energy consumption of asphalt and reinforced concrete pavement materials and construction, J Infrastruct Syst, 11, 9, 10.1061/(ASCE)1076-0342(2005)11:1(9) Hassan M. Life-Cycle Assessment of Warm-Mix Asphalt: an environmental and economic perspective. In: Proceedings of 88th transportation research board annual meeting. Washington D.C., USA; 2009. p. 1–15. Peinado, 2011, Energy and exergy analysis in an asphalt plant’s rotary dryer, Appl Therm Eng, 31, 1039, 10.1016/j.applthermaleng.2010.11.029 D’Angelo JA, Harm EE, Bartoszek JC, Baumgardner GL, Corrigan MR, Cowsert JE, et al. Warm-Mix Asphalt: European practice; 2008. Hanz A, Bahia H. Effects of warm mix additives of mixture workability and the performance implications of reduced binder aging. In: The 7th international conference and airfield pavement technology. Thailand; 2011. p. 66–76. Edwards, 2005, Wax in bitumen-State of the art: Part2-Characterization and effects, Road Mater Pavement Des, 6, 1, 10.1080/14680629.2005.9690015 Lu, 2007, Effect of bitumen wax on asphalt mixture performance, Constr Build Mater, 21, 1961, 10.1016/j.conbuildmat.2006.05.048 Sasolwax. Sasobit. Sasolwax; 2008. <www.Sasolwax.com>. Damm KW. Asphalt flow improvers-a new technology for reducing mixing temperature of asphalt concrete mixes with high resistance against permanent deformation. In: 6th international RILEM Symposium. Zurich, Switzerland; 2003. p. 521–6. Worrel J, Choi Y. Warm mix asphalt (WMA) review. Austroads; 2007. Aurilio V, Michael LL. Sasobit®-warm mix asphalt technology: Victoria Street Trial in the city of Ottawa. In: Proceedings of the 53th annual conference of the Canadian Technical Asphalt Association (CTAA). Saskatoon Saskatchewan, Canada; 2008. p. 249–65. Sampath, 2010 Hurley GC. Evaluation of new technologies for use in warm mix asphalt. University of Auburn, Ms.c thesis; 2006. Hurley GC, Prowell BD. Evaluation of Sasobit® for use in warm mix asphalt. NCAT t; 2005. Perkins SW. Synthesis of warm mix asphalt paving strategies for use in Montana highway, construction; 2009. Hurley, 2006, Evaluation of potential processes for use in warm mix asphalt, J Assoc Asphalt Paving Technol, 75, 41 Kristjansdottir, 2007, Assessing potential for warm-mix asphalt technology adoption, Transport Res Rec: J Transport Res Board, 2040, 91, 10.3141/2040-10 Ji, 2010, Study on the impact of Sasobit® on asphalt properties and microstructures, J Mater Civ Eng, 12 Edwards Y. Influence of waxes on bitumen and asphalt concrete mixture performance. KTH Arquitecture and the built environment, PhD thesis; 2005. Edwards, 2005, Wax in bitumen-State of the art: Part1-Classifications and general aspects, Road Mater Pavement Des, 6, 281, 10.1080/14680629.2005.9690009 Bueche N. Warm mix asphalt bituminous mixtures with regards to energy, emissions, and performance. In: Young Researchers Seminar (YRS). Torino, Italy; 2011. Syroezhko, 2011, Influence of natural additives and those synthesized by the Fischer-Tropsch method on the properties of petroleum bitumen and quality of floated asphalt, Coke Chem, 54, 26, 10.3103/S1068364X11010066 Wasiuddin NM, Saha R, King W Jr. Effects of a wax-based warm mix additive on lower Compaction Temperatures. Advances in geotechnical engineering proceedings of the geo-frontiers: ASCE; USA; 2011. p. 4614–23. Wasiuddin N, Saltibus N, Mohammad L. Effects of wax-based warm mix additives on cohesive strength of asphalt binders. In: T & DI congress: ASCE; USA; 2011. p. 528–37. Rubio, 2012, Warm mix asphalt: an overview, J Cleaner Prod, 24, 76, 10.1016/j.jclepro.2011.11.053 Zhao, 2012, Workability of Sasobit® warm mixture asphalt, Energy Proc, 16, 1230, 10.1016/j.egypro.2012.01.196 Silva, 2010, Assessment of the performance of warm mix asphalts in road pavements, International Journal of Pavement Research and Technology, 3, 119 Seller BH. Characterization and transition of asphalt cement composite materials. University North Carolina at Charlotte, Ms.C thesis; 2009. Xiao, 2011, Influence of short-term aging on rheological characteristics of non-foaming WMA binders, J Performan Constr Facilities Xiao, 2012, Effects of non-foaming WMA additives on asphalt binders at high performance temperatures, Fuel, 94, 144, 10.1016/j.fuel.2011.09.017 Ran J, Xu S, Li M, Ji J. Research of warm mix asphalt and warm mix asphalt with Sasobit®. In: ICCTP integrated transportation system green intelligent-reliable. USA; 2010. Zaumanis M. Warm mix asphalt investigation. Riga Technical University, Ms.C thesis; 2010. Biro, 2009, Midrange temperature rheological properties of warm asphalt binders, J Mater Civ Eng, 21, 316, 10.1061/(ASCE)0899-1561(2009)21:7(316) FHWA. Quarterly technical progress report. Federal Highway Administration; 2009. Tasdemir, 2009, High temperature properties of wax modified binders and asphalt mixtures, Constr Build Mater, 23, 3220, 10.1016/j.conbuildmat.2009.06.010 Edwards, 2007, Rheological effects of commercial waxes and polyphosphoric acid in bitumen 160/220-high and medium temperature performance, Constr Build Mater, 21, 1899, 10.1016/j.conbuildmat.2006.07.012 Edwards, 2006, Effects of commercial waxes on asphalt concrete mixtures performance at low and medium temperatures, Cold Reg Sci Technol, 45, 31, 10.1016/j.coldregions.2006.01.002 Silva, 2010, Optimization of warm mix asphalts using different blends of binders and synthetic paraffin wax contents, Constr Build Mater, 24, 1621, 10.1016/j.conbuildmat.2010.02.030 Polacco, 2012, Structural and rheological characterization of wax modified bitumen, Fuel, 95, 407, 10.1016/j.fuel.2011.10.006 Cao, 2011, Evaluation of long-term aged properties of Sasobit® modified asphalt, International Journal of Pavement Research and Technology, 4, 384 Jamshidi, 2012, Effects of Sasobit® content on the rheological characteristics of unaged and aged asphalt binders at high and intermediate temperatures, Mater Res, 15, 1, 10.1590/S1516-14392012005000083 Edwards, 2006, Rheological effects of commercial waxes and phosphoric acid in bitumen 160/22– low temperature performance, Fuel, 85, 989, 10.1016/j.fuel.2005.09.014 Arega, 2011, Influence of warm mix additives and reduced aging on the rheology of asphalt binders with different natural wax contents, J Mater Civ Eng, 23, 1453, 10.1061/(ASCE)MT.1943-5533.0000315 Liu, 2011, Laboratory evaluation of Sasobit®-modified warm-mix asphalt for Alaskan conditions, J Mater Civ Eng, 23, 1498, 10.1061/(ASCE)MT.1943-5533.0000226 Wasiuddin, 2007, Comparative laboratory study of Sasobit® and Aspha-Min® additives in warm-mix asphalt, Transport Res Rec: J Transport Res Board, 1998, 82, 10.3141/1998-10 Gandhi, 2009, Laboratory evaluation of warm asphalt binder aging characteristics, Int J Pavement Eng, 10, 353, 10.1080/10298430802342724 Gandhi T, Amirkhanian SN. Laboratory investigation of warm asphalt binder properties: a preliminary investigation. MAIREPAV5 proceedings, vol. 5. Park City, Utah, USA; 2007. p. 475–80. Mogawer PE, Walaa S, Austerman AJ, Bonaquist R. Evaluating effects of warm-mix asphalt technology additive dosages on workability and durability of asphalt mixtures containing recycled asphalt pavement. In: Proceedings of 88th transportation research board annual meeting. Washington D.C., USA; 2009. p. 1–9. Hamzah, 2012, Parameters to characterize the effects of Sasobit® content on the rheological properties of un-aged and aged asphalt binders, J Road Mater Pavement Des, 13, 368, 10.1080/14680629.2012.668836 SP-1. Superpave performance graded asphalt binder specifications and testing. Asphalt Institute, KY, USA; 2003. Biro, 2009, Determination of zero shear viscosity of warm asphalt binders, Constr Build Mater, 23, 2080, 10.1016/j.conbuildmat.2008.08.015 Bahia HU, Hanson DI, Zeng M, Zhai H, Khatri MA, Anderson RM. Characterization of modified asphalt binders in Superpave™ mix design; 2001. Buss, 2011 Hossain, 2009 Hamzah, 2010, Evaluation of the potential of Sasobit® to reduce required heat energy and CO2 emission in the asphalt industry, J Cleaner Prod, 18, 1859, 10.1016/j.jclepro.2010.08.002 Lu, 2000, Laboratory study on the low temperature physical hardening of conventional and polymer modified bitumens, Constr Build Mater, 14, 79, 10.1016/S0950-0618(00)00012-X Edwards, 2005, Influence of commercial waxes on bitumen aging properties, Energy Fuels, 19, 2519, 10.1021/ef050166r Claudy, 1992, A new interpretation of time-dependent physical hardening in asphalt based on DSC and optical thermoanalysis, Proc Am Chem Soc, 37, 1408 Hilliard JE. Spinodal decomposition. In: Phase transformations. Papers presented at a seminar of the American Society of Metals. American Society for Metals. Metals Park, Ohio, USA; 1970. p. 497–560. Hossain, 2011, Rheological evaluation of warm mix and anti-stripping additives modified performance grade binders, Road Mater Pavement Des, 12, 875, 10.1080/14680629.2011.9713898 Liu, 2012, Low temperature performance of Sasobit®-modified warm-mix asphalt, J Mater Civ Eng, 24, 57, 10.1061/(ASCE)MT.1943-5533.0000347 You, 2011, Evaluation of low-temperature binder properties of warm-mix asphalt, extracted and recovered RAP and RAS, and bioasphalt, J Mater Civ Eng, 23, 1569, 10.1061/(ASCE)MT.1943-5533.0000295 Airey, 2002, State of the art report on moisture sensitivity test methods for bituminous pavement materials, Road Mater Pavement Des, 3, 355, 10.1080/14680629.2002.9689930 Shalaby, 2002, Modelling short-term aging of asphalt binders using the rolling thin film oven test, Can J Civ Eng, 29, 135, 10.1139/l01-086 Rajan, 2010, Influence of Asphaltanes on the rheological properties of blended paving asphalts, Petrol Sci Technol, 28, 331, 10.1080/10916460802640282 Gao, 2006, Aging behaviour of colored paving asphalt, Petrol Sci Technol, 24, 331, 10.1081/LFT-200041176 Lee, 2011, Aging analysis of rubberized asphalt binders and mixes using gel permeation chromatography, Constr Build Mater, 25, 1485, 10.1016/j.conbuildmat.2010.08.004 Lee, 2009, Laboratory evaluation of the effects of short-term oven aging on asphalt binders in asphalt mixtures using HP-GPC, Constr Build Mater, 23, 3087, 10.1016/j.conbuildmat.2009.03.012 Doh, 2008, Analysis of unbalanced binder oxidation level in recycled asphalt mixture using GPC, Constr Build Mater, 22, 1253, 10.1016/j.conbuildmat.2007.01.026 Wahhab, 1999, Prediction of asphalt rheological properties using HP-GPC, J Mater Civ Eng, 11, 6, 10.1061/(ASCE)0899-1561(1999)11:1(6) Kim, 1993, Use of GPC chromatograms to characterize aged asphalt cements, J Mater Civ Eng, 5, 41, 10.1061/(ASCE)0899-1561(1993)5:1(41) Airey, 2003, State of the art report on ageing test methods for bituminous pavement materials, Int J Pavement Eng, 4, 165, 10.1080/1029843042000198568 Xiaohu, 2002, Effect of aging on bitumen chemistry and rheology, Constr Build Mater, 16, 15, 10.1016/S0950-0618(01)00033-2 Banerjee, 2012, The effect of long-term aging on the rheology of warm mix asphalt binders, Fuel, 10.1016/j.fuel.2012.01.072 Gandhi T. Effects of warm asphalt additives on asphalt binder and mixture properties. Clemson University, Ph.D thesis; 2008. Putman, 2005 Liu, 2009, Variance analysis and performance evaluation of different crumb rubber modified (CRM) asphalt, Constr Build Mater, 23, 2701, 10.1016/j.conbuildmat.2008.12.009 Akisetty, 2009, High temperature properties of rubberized binders containing warm asphalt additives, Constr Build Mater, 23, 565, 10.1016/j.conbuildmat.2007.10.010 Akisetty, 2009, Evaluation of engineering properties of rubberized laboratory mixes containing warm mix additives, Test Eval ASTM, 38, 1 Lee, 2008, The effect of crumb rubber modifier (CRM) on the performance properties of rubberized binders in HMA pavements, Constr Build Mater, 22, 1368, 10.1016/j.conbuildmat.2007.04.010 Xiao, 2009, Effects of various long-term aging procedure on rheological properties of laboratory prepared rubberized asphalt binders, Test Eval ASTM, 37, 1 Xiao, 2007, Rutting resistance of rubberized asphalt concrete pavements containing reclaimed asphalt pavement mixtures, J Mater Civ Eng, 19, 475, 10.1061/(ASCE)0899-1561(2007)19:6(475) Xiao F. Development of fatigue predictive models of rubberized asphalt concrete (RAC) containing reclaimed asphalt pavement (RAP) mixtures. Clemson University, Ms.C thesis; 2006. Airey, 2002, Properties of polymer modified bitumen after rubber-bitumen interaction, J Mater Civ Eng, 14, 344, 10.1061/(ASCE)0899-1561(2002)14:4(344) Airey, 2003, Absorption of bitumen into crumb rubber using the basket drainage method, Int J Pavement Eng, 4, 105, 10.1080/1029843032000158879 Xiao, 2010, Fatigue behavior of rubberized asphalt concrete mixtures containing warm asphalt additives, Constr Build Mater, 23, 3144, 10.1016/j.conbuildmat.2009.06.036 Zhengqi Z, Qifeng W, Zhisheng Z. Evaluation of Sasobit® warm mix rubber asphalt properties. In: Proceedings of 3th international conference on transportation engineering. USA; 2011. Li M, Anling L, Ran J, Li Q. Testing and evaluation of Sasobit® on the performances of asphalt rubber. In: ICCTP Integrated transportation system. Green intelligent-reliable. USA; 2011. p. 3502–9. Akisetty, 2010, Analysis of rheological properties of rubberized binders containing warm asphalt additives, Can J Civ Eng, 37, 763, 10.1139/L10-020 Akisetty, 2009, Laboratory investigation of the influence of warm asphalt additives on long-term performance properties of CRM binders, Int J Pavement Eng, 11, 153, 10.1080/10298430903197225 Gonzalez, 2010, Thermomechanical properties of bitumen modified with crumb tire rubber and polymeric additives, Fuel Process Technol, 91, 1033, 10.1016/j.fuproc.2010.03.009 Lee, 2009, Characterization of warm mix asphalt binders containing artificially long-term aged binders, Constr Build Mater, 23, 2371, 10.1016/j.conbuildmat.2008.11.005 Shrum ED. Evaluation of moisture damage in warm mix asphalt containing recycled asphalt pavement. University of Tennessee – Knoxville, Ms.C thesis; 2010. Kim, 2011, Rheology of warm mix asphalt binders with aged binders, Constr Build Mater, 25, 183, 10.1016/j.conbuildmat.2010.06.040 Kim, 2011, Performance evaluation of recycled PMA binders containing wma binders containing warm mix asphalt additives, Test Eval ASTM, 39, 1 Yildirim, 2007, Polymer modified asphalt binders, Constr Build Mater, 21, 66, 10.1016/j.conbuildmat.2005.07.007 Kim, 2010, Effects of warm mix asphalt additives on performance properties of polymer modified asphalt binders, Can J Civ Eng, 37, 17, 10.1139/L09-118 Susana H, Macleod D, Zanzoto L. Our experiences with the application of Sasobit® in polymer modified asphalts. In: Proceedings of the fifty-third annual conference of the Canadian Technical Asphalt Association (CTAA). Saskatoon, Saskatchewan, Canada; 2008. Kanitpong, 2008, Evaluation of a warm-mix asphalt additive, Proc Inst Civil Eng Constr Mater, 161, 1, 10.1680/coma.2008.161.1.1 Kanitpong K, Sonthong S, Nam K, Martono W, Bahia H. Laboratory study on warm mix asphalt additives. In: Proceedings of 86th transportation research board annual meeting, Washington D.C., USA; 2007. p. 1–19. Hofsink W, Barnard M. SMA wearing courses on runways and taxiways-recent experience in South Africa. In: 30th International flexible pavements conference. Surfers Paradise, Queensland, Australia; 2009. Kim, 2012, Influence of warm mix additives on polymer modified asphalt mixture properties, J Mater Civil Eng, 1 Edwards, 2010, Energy saving and environmental friendly wax concept for polymer modified mastic asphalt, Mater Struct, 43, 123, 10.1617/s11527-010-9603-y Krupa, 2007, Phase change materials based on low-density polyethylene/paraffin wax blends, Eur Polymer J, 43, 4695, 10.1016/j.eurpolymj.2007.08.022 SP-2. Superpave mix design, superpave series. Asphalt Institute, Lexington, KY, USA; 2001. West RC, Watson DE, Turner PA, Casola JR. Mixing and compaction temperatures of asphalt binders in hot-mix asphalt. NCHRP; 2010. Bennert, 2010, Assessment of workability and compactability of warm-mix asphalt, Transport Res Rec: J Transport Res Board, 2180, 36, 10.3141/2180-05 Bonaquist R. Mix Design Practices for Warm Mix Asphalt: NCHRP; 2011. Sanchez-Alonso, 2011, Evaluation of compactability and mechanical properties of bituminous mixes with warm additives, Constr Build Mater, 25, 2304, 10.1016/j.conbuildmat.2010.11.024 Vaitkus A, Kilas M, Tuminiene F, Perveneckas Z. Experience use of warm mix asphalt in Lithuania. In: The 8th Int Conf environment engineering. Vilnius, Lithuania; 2011. Kilas M, Vaitkus A, Paliukatie M. Warm asphalt research, analysis and evaluation. In: Proceedings of modern building materials, structures and techniques. Vilnius Gediminas Technical University, Italy; 2010. Hamzah, 2010, Evaluation of engineering properties and economic advantages of WMA using local materials, J Appl Sci, 10, 2433, 10.3923/jas.2010.2433.2439 Brits, 2004 Mohammad L, Shadi S, Cooper S. Evaluation of asphalt mixture containing warm mix additive. In: Proceedings of the airfield and highway pavements conference. USA; 2008. Jones, 2008 Kridan, 2010, Development of warm mix asphalt and compliance with the requirements set by specifications, Eur J Sci Res, 48, 118 Cooper, 2009 Goh, 2009 Hearon A, Diefenderfer S. Laboratory evaluation of warm asphalt properties and performance. Airfield and highway pavements: efficient pavements supporting transportation’s a future proceedings on airfield and highway pavement conference. ASCE, USA; 2008. p. 182–94. Diefenderfer S, McGhee K, Donaldson BM. Installation of warm mix asphalt projects in Virginia Transport Research Council. Research report; 2007. Akisetty CK, Lee SJ, Amirkhanian SN. Volumetric properties of warm rubberized mixes depending on compaction temperature. Airfield and highway pavements: efficient pavements supporting transportation’s a future proceedings on airfield and highway pavement conference. ASCE, USA; 2008. p. 205–12. Akisetty, 2009, Effects of compaction temperature on volumetric properties of rubberized mixes containing warm-mix additives, J Mater Civ Eng, 21, 409, 10.1061/(ASCE)0899-1561(2009)21:8(409) Kanitpong, 2011, Investigation on the effects of gradation and aggregate type to moisture damage of warm mix asphalt modified with Sasobit®, Int J Pavement Eng Edwards, 2006, Influence of commercial waxes and polyphosphoric acid on bitumen and asphalt concrete performance at low and medium temperatures, Mater Struct, 39, 725, 10.1617/s11527-006-9134-8 Shang, 2011, Pyrolyzed wax from recycled cross-linked polyethylene as warm mix asphalt (WMA) additive for SBS modified asphalt, Constr Build Mater, 25, 886, 10.1016/j.conbuildmat.2010.06.097 Xiao, 2010, Evaluation of rutting resistance in warm-mix asphalts containing moist aggregate, Transport Res Rec: J Transport Res Board, 2180, 75, 10.3141/2180-09 Hurley, 2010 Hurley G, Prowell B, Kvasnak A. Wisconsin field trial of warm-mix asphalt technologies: construction summary. NCAT; 2010. Kim, 2010 Hurley, 2009 Kvasnak AN, Moore JR, Taylor AJ, Prowell BD. Preliminary evaluation of warm mix asphalt field demonstration. Franklin and Tennessee. NCAT; 2010. Estakhri C, Button J, Alvarez AE. Field and laboratory investigation of warm mix asphalt in Texas. Texas Transportation Institute and the Texas A&M University, System; 2010. Solaimanian, 2011 Witczak MW. Specification criteria for simple performance tests for rutting, volume I: dynamic modulus (E∗) and volume II: flow number and flow time: NCHRP, Report 580; 2008. Petit C, Millien A, Canestrari F, Pannunzio V, Virdili A. Experimental study on shear fatigue behaviour and stiffness performance of warm mix asphalt by adding synthetic wax. Cornell University, Library; 2012. p. 1–21. Haggag, 2011, Fatigue evaluation of warm mix asphalt mixtures using uniaxial cyclic direct tension compression test, Transport Res Rec: J Transport Res Board, 2208, 26, 10.3141/2208-04 Yanhai Y, Huaizhi Z, Yaodong W. Laboratory evaluation of the warm mix asphalt performance in Liaoning. In: ICCTP: critical issues in transportation systems planning, development, and management. USA; 2009. Saboundjian, 2011, Late-season paving of a low-volume road with warm-mix asphalt, Transport Res Rec: J Transport Res Board, 2205, 40, 10.3141/2205-06 Goh, 2011 Chapuis, 1995, Temperature dependent tensile strength of asphalt mixtures in relation to field cracking data, ASTM STP, 1265, 180 Benert, 2011, Influence of production temperature and aggregate moisture content on the initial performance of warm-mix asphalt, Transport Res Rec: J Transport Res Board, 2208, 97, 10.3141/2208-13 Medeiros, 2011, Evaluation of moisture and low-temperature cracking susceptibility of warm-mixture asphalt, Int J Pavement Eng, 1 Curtis, 1990 Caro, 2008, Moisture susceptibility of asphalt mixtures, Part 1: mechanisms, Int J Pavement Eng, 9, 81, 10.1080/10298430701792128 Caro, 2008, Moisture susceptibility of asphalt mixtures, Part 2: characterisation and modelling, Int J Pavement Eng, 9, 99, 10.1080/10298430701792144 MS-24. Best practice to minimize moisture sensitivity in asphalt mixture. Asphalt Institute, KY, USA; 2007. Kanitpong, 2005, Relating adhesion and cohesion of asphalts to the effect of moisture on laboratory performance of asphalt mixtures, Transport Res Rec: J Transport Res Board, 1901, 33, 10.1177/0361198105190100105 Buddhala, 2012, Effects of an amine anti-stripping agent on moisture susceptibility of Sasobit® and Aspha-Min® mixes by surface free energy analysis, J Test Eval, 40, 1 Wasiuddin, 2008, Effect of Sasobit® and Aspha-Min® on wettability and adhesion between asphalt binders and aggregates, Transport Res Rec: J Transport Res Board, 2051, 80, 10.3141/2051-10 Wei, 2011, Influence of commercial wax on performance of asphalt, J Mater Civ Eng, 22, 760, 10.1061/(ASCE)MT.1943-5533.0000016 O’Sullivan K, Wall PA. The effects of warm mix asphalt additives on Recycled Asphalt Pavement. Worcester Polytechnic Institute, Ms.C thesis; 2009. Wasiuddin, 2012, Novel moisture-conditioning method for adhesive failure of hot-and warm-mix asphalt binders, Transport Res Rec: J Transport Res Board, 2208, 108, 10.3141/2208-14 Arabani, 2011, Estimating moisture sensitivity of warm-mix asphalt modified with Zycosoil as an antistrip agent using surface free energy method, J Mater Civ Eng, 1, 392 Shivaprasad, 2012, Evaluation of moisture sensitivity of stone matrix asphalt mixtures using polymerised warm mix asphalt technologies, Int J Pavement Eng, 1 Hamzah MO, Aman MY, Shahadan Z, Mohd Hassan MR. Laboratory evaluation of the dynamic stripping test on porous asphalt incorporating Sasobit®. In: Proceedings of the 7th international conference on airfield pavement technology. Thailand; 2011. Lu, 2006, Long-term effectiveness of antistripping additives: laboratory evaluation, Transport Res Rec: J Transport Res Board, 1970, 14, 10.1177/0361198106197000102 Mogawer, 2011, Evaluating the effect of warm-mix asphalt technologies on moisture characteristics of asphalt binders and mixtures, Transport Res Rec: J Transport Res Board, 2209, 52, 10.3141/2209-07 Xiao, 2010, Influence of antistripping additives on moisture susceptibility of warm mix asphalt mixtures, J Mater Civ Eng, 22, 1047, 10.1061/(ASCE)MT.1943-5533.0000111 Xiao, 2009, Laboratory investigation of moisture damage in warm-mix asphalt containing moist aggregate, Transport Res Rec: J Transport Res Board, 2126, 115, 10.3141/2126-14 Xiao, 2011, Low-volume road WMA mixtures: moisture susceptibility of mixtures containing coal ash and roofing shingle with moist aggregate, J Mater Civ Eng, 24, 48, 10.1061/(ASCE)MT.1943-5533.0000358 Xiao F, Wenbin Z, Amirkhanian SN. Laboratory evaluation of effects of soaked duration on moisture susceptibility of warm mix asphalt mix. T & DI Congress. USA; 2011. Little, 2001 Shen, 2010, Influence of nano-sized hydrated lime (HL) on selected properties of hot-mix asphalt (HMA), Int J Pavement Res Technol, 4, 252 Cheng, 2011, Moisture susceptibility of warm mix asphalt mixtures containing nanosized hydrated lime, J Mater Civ Eng, 1, 265 Cheng, 2011, Moisture susceptibility of warm-mix asphalt mixtures containing nanosized hydrated lime, J Mater Civ Eng, 23, 1552, 10.1061/(ASCE)MT.1943-5533.0000308 Shivaprasad, 2011, Moisture susceptibility of polymerized stone matrix asphalt using warm mix asphalt technologies using moist aggregates, Test Eval ASTM, 9, 1 Akisetty, 2011, Estimating correlations between rheological and engineering properties of rubberized asphalt concrete mixtures containing warm mix asphalt additive, Constr Build Mate, 25, 950, 10.1016/j.conbuildmat.2010.06.087 Xiao F, Wenbin Z, Serji NA. Aging influence on fatigue characteristics of RAC mixtures containing warm asphalt additives. Adv Civil Eng; 2010. NAPA. Black and green: sustainable asphalt, now and tomorrow. National Asphalt Pavement Association; 2009. Lee, 2010, Quantitative assessment of environmental and economic benefits of recycled materials in highway construction, Transport Res Rec: J Transport Res Board, 2158, 138, 10.3141/2158-17 Karlsson, 2006, Material-related aspects of asphalt recycling: state-of-the-art, J Mater Civ Eng, 18, 81, 10.1061/(ASCE)0899-1561(2006)18:1(81) Chauhan, 2010, Recent trends of the emission characteristics from the road construction industry, Environ Sci Pollut Res, 17, 1493, 10.1007/s11356-010-0327-x Kuo, 2008, The exposure of temple workers to polycyclic aromatic hydrocarbons, Sci Total Environ, 401, 44, 10.1016/j.scitotenv.2008.04.018 Tsai, 2004, Assessing and predicting the exposures of polycyclic aromatic hydrocarbons (PAHs) and their carcinogenic potencies from vehicle engine exhausts to highway toll station workers, Atmos Environ, 38, 333, 10.1016/j.atmosenv.2003.08.038 Karakaya, 1999, Investigation of some immunological functions in a group of asphalt workers exposed to polycyclic aromatic hydrocarbons, Toxicology, 135, 43, 10.1016/S0300-483X(99)00048-7 Chiu, 2008, Life cycle assessment on using recycled materials for rehabilitating asphalt pavements, Resour Conserv Recycl, 52, 545, 10.1016/j.resconrec.2007.07.001 Huang, 2007, A review of the use of recycled solid waste materials in asphalt pavements, Resour Conserv Recycl, 52, 58, 10.1016/j.resconrec.2007.02.002 Jamshidi, 2012, Selection of reclaimed asphalt pavement sources and contents for asphalt mix production based on asphalt binder rheological properties, fuel requirements and greenhouse gas emissions, J Cleaner Prod, 23, 20, 10.1016/j.jclepro.2011.10.008 Hamzah, 2010, Effects of Sasobit® on the required heat energy and CO2 emission on blended asphalt binder incorporated with aged binder, Eur J Sci Res, 42, 15 Howard, 2009 Tao, 2009, Effects of warm-mix asphalt additives on workability and mechanical properties of reclaimed asphalt pavement material, Transport Res Rec: J Transport Res Board, 2126, 151, 10.3141/2126-18 Mallick, 2008, Using warm-wix asphalt technology to incorporate high percentage of reclaimed asphalt pavement material in asphalt mixtures, Transport Res Rec: J Transport Res Board, 2051, 71, 10.3141/2051-09 Celaya, 2008, Implementation of quality management of hot-mix asphalt with seismic methods, Transport Res Rec: J Transport Res Board, 2057, 99, 10.3141/2057-12 Williams, 2007, Correlation of resilient and seismic modulus test results, J Mater Civ Eng, 19, 1026, 10.1061/(ASCE)0899-1561(2007)19:12(1026) Bai X. Assessment of relationship between dynamic and seismic moduli of asphalt mixtures. University of Texas, El Paso, Ph.D thesis; 2004. Mallick, 2007, Evaluation of heated reclaimed asphalt pavement material and wax-modified asphalt for use in recycled hot-mix asphalt, Transport Res Rec: J Transport Res Board, 1998, 112, 10.3141/1998-14 West, 2009, Testing of moderate and high reclaimed asphalt pavement content mixes, Transport Res Rec: J Transport Res Board, 2126, 100, 10.3141/2126-12 Shivaprasad, 2011, Performance of warm-mix asphalt mixtures containing recycled coal ash and roofing shingles with moist aggregates for low-volume roads, Transport Res Rec: J Transport Res Board, 2205, 48, 10.3141/2205-07 Robinette, 2010, Energy, emissions, material conservation, and prices associated with construction, rehabilitation, and material alternatives for flexible pavement, Transport Res Rec: J Transport Res Board, 2179, 10, 10.3141/2179-02 Al-Qadi, 2012, Effects of curing time and reheating on performance of warm stone matrix asphalt, J Mater Civil Eng, 1 Al-Qadi IL, Kern J, Baek J, Doyen M. Short-term characterization and performance of warm mix asphalt. In: Illinois Bituminous paving conference. Illinois, USA; 2010. Al-Qadi, 2012 Chowdhury, 2008 Button, 2007 Noelting M, Arnold J, Jones B. Heavy duty pavement – new asphalt designs meet extreme challenges. In: China–Japan paving technology symposium. Nanjing, China; 2005. Roberts, 2002, History of hot mix asphalt mixture design in the United States, J Mater Civ Eng, 14, 279, 10.1061/(ASCE)0899-1561(2002)14:4(279) Keches C, Leblank A. Reducing greenhouse gas emissions from asphalt materials. Worcester Polytechnic Institute, Bachelor thesis; 2007. Choi, 2007 Jones, 2008 Aschenbrener, 2011 Kvasnak, 2010 Sargand SM, Edwards WF, Bendana J. Testing of perpetual with warm asphalt concrete mixes in the Ohio APLF. In: 3th International conference on accelerated pavement testing apt 2008 impacts and benefits from APT programs. Madrid, Spain; 2008. Sargand, 2009 Hurley, 2008 Kristjonesdottir, 2006 Bornmann F, Hiley R, Strydom S. Fischer-Tropsch wax bitumen modifier: overcoming temperature and time, constraints; 2007. Howard IL, Doyle JD, Hemsley JM, Baumgardner GL, Cooley LA. Use of hot mix warm compacted asphalt in construction. In: Proceedings of 90th transportation research board annual meeting. Washington D.C., USA; 2011. Shaw J. TWG-Warm mix asphalt. Sasolwax; 2007. Sabita. Innovative warm mix asphalt trials completed near Durban; 2011. Brown, 2008 Shackel B. The objective selection of concrete block paving for engineering projects. In: Proceedings of the 8th conference concrete block pavement. California, San Francisco, USA; 2006. p. 315–24. Glasby, 1995, Concept of sustainable development: a meaningful goal?, Sci Total Environ, 159, 67, 10.1016/0048-9697(94)04251-H Cheng L, Chen L, Yan G, Zheng H. Life cycle assessment of road surface paving with warm mix asphalt (WMA) replacing hot mix asphalt (HMA). In: International conference on e-product e-service and e-entertainment (ICEEE). Henan, China; 2010. Hassan, 2010, Evaluation of the environmental and economic impacts of warm-mix asphalt using life-cycle assessment, Int J Constr Educat Res, 6, 238, 10.1080/15578771.2010.507619 Tatari, 2012, Comparative sustainability assessment of warm-mix asphalts: a thermodynamic based hybrid life cycle analysis, Resour Conserv Recycl, 58, 18, 10.1016/j.resconrec.2011.07.005 Armstrong, 2007 USEA. Toward a national energy policy. United States Energy Administration; 2004. Mallick, 2009, A laboratory study on CO2 emission from asphalt binder and its reduction with the use of warm mix asphalt, Int J Sustain Eng, 2, 275, 10.1080/19397030903137287 Sargand, 2011, Field evaluation of warm mix asphalt Technologies, J Mater Civ Eng, 1, 72 White TD, Haddock JE, National Research Council, Transportation Research B, National Cooperative Highway Research P, American Association of State H, Transportation O, et al. Validation of performance-related test of aggregates for use in hot-mix asphalt pavements. Transportation Research Board of the National Academies; 2006. MS-4. The Asphalt handbook. Asphalt Institute, Lexington, KY, USA; 2007. Cominsky, 1994 Read, 2003 Roberts FL, Kandhal PS, Brown ER, Lee DY, Kennedy TW. Hot mix asphalt materials, mixture design and, construction. 3rd ed. 2009. Kandhal, 1997 Tarrer AR, Wagh V. The effects of the physical and chemical characteristics of aggregate on boning; 1991. Barksdale, 1991 Hosking, 1992 Mrawira, 2006, Effect of aggregate type, gradation, and compaction level on thermal properties of hot-mix asphalts, Can J Civ Eng, 33, 1410, 10.1139/l06-076 Luca, 2005, New measurement of thermal properties of superpave asphalt concrete, J Mater Civ Eng, 17, 72, 10.1061/(ASCE)0899-1561(2005)17:1(72) Amirkhanian, 1993, Recyclability of moisture damaged flexible pavements, J Mater Civ Eng, 5, 510, 10.1061/(ASCE)0899-1561(1993)5:4(510)