Construction of Fe/Ag galvanic couple by mechanochemical in-situ reduced Ag to accelerate the degradation of Fe-based implant

Liu P, Zhang D, Dai Y, et al. Microstructure, mechanical properties, degradation behavior, and biocompatibility of porous Fe-Mn alloys fabricated by sponge impregnation and sintering techniques. Acta Biomater, 2020, 114: 485–496 Xu C, Yu S, Wu W, et al. Direct ink writing of Fe bone implants with independently adjustable structural porosity and mechanical properties. Additive Manuf, 2022, 51: 102589 Shuai C, Zhong S, Shuai Y, et al. Accelerated anode and cathode reaction due to direct electron uptake and consumption by manganese dioxide and titanium dioxide composite cathode in degradation of iron composite. J Colloid Interface Sci, 2023, 632: 95–107 Khan M M, Deen K M, Shabib I, et al. Controlling the dissolution of iron through the development of nanostructured Fe-Mg for biomedical applications. Acta Biomater, 2020, 113: 660–676 Huang T, Cheng J, Bian D, et al. Fe-Au and Fe-Ag composites as candidates for biodegradable stent materials. J Biomed Mater Res B Appl BioMater, 2016, 104: 225–240 Huang T, Cheng J, Zheng Y F. In vitro degradation and biocompatibility of Fe-Pd and Fe-Pt composites fabricated by spark plasma sintering. Mater Sci Eng-C, 2014, 35: 43–53 Sharipova A, Unger R E, Sosnik A, et al. Dense drug-eluting biodegradable Fe-Ag nanocomposites. Mater Des, 2021, 204: 109660 Liu H, Wei J, Dong J, et al. The synergy between cementite spheroidization and Cu alloying on the corrosion resistance of ferrite-pearlite steel in acidic chloride solution. J Mater Sci Tech, 2021, 84: 65–75 Song J, She J, Chen D, et al. Latest research advances on magnesium and magnesium alloys worldwide. J Magnesium Alloys, 2020, 8: 1–41 Liu S, Jie J, Dong B, et al. Novel insight into evolution mechanism of second liquid-liquid phase separation in metastable immiscible Cu-Fe alloy. Mater Des, 2018, 156: 71–81 Zhang C, Chen C, Li P, et al. Microstructure and properties evolution of rolled powder metallurgy Cu-30Fe alloy. J Alloys Compd, 2022, 909: 164761 Dai X, Xie M, Zhou S, et al. Formation mechanism and improved properties of Cu95Fe5 homogeneous immiscible composite coating by the combination of mechanical alloying and laser cladding. J Alloys Compd, 2018, 740: 194–202 Kumar A, Jayasankar K, Debata M, et al. Mechanical alloying and properties of immiscible Cu-20 wt% Mo alloy. J Alloys Compd, 2015, 647: 1040–1047 Cha Y, Kim T, Seo B, et al. Combustion-driven synthesis route for bimetallic Ag-Bi nanoparticle-anchored carbon nanotube electrodes for high-performance supercapacitors. Carbon, 2022, 198: 11–21 Sharipova A, Swain S K, Gotman I, et al. Mechanical, degradation and drug-release behavior of nano-grained Fe-Ag composites for biomedical applications. J Mech Behav BioMed Mater, 2018, 86: 240–249 Khayati G R, Janghorban K. Preparation of nanostructure silver powders by mechanical decomposing and mechanochemical reduction of silver oxide. Trans Nonferrous Met Soc China, 2013, 23: 1520–1524 Sarraf M, Rezvani Ghomi E, Alipour S, et al. A state-of-the-art review of the fabrication and characteristics of titanium and its alloys for biomedical applications. Bio-des Manuf, 2022, 5: 371–395 Xiong W, Hao L, Li Y, et al. Effect of selective laser melting parameters on morphology, microstructure, densification and mechanical properties of supersaturated silver alloy. Mater Des, 2019, 170: 107697 Feng P, Zhao R, Tang W, et al. Structural and functional adaptive artificial bone: Materials, fabrications, and properties. Adv Funct Mater, 2023, 2214726 Chacón J M, Núñez P J, Caminero M A, et al. 3D printing of patient-specific 316L-stainless-steel medical implants using fused filament fabrication technology: Two veterinary case studies. Bio-des Manuf, 2022, 5: 808–815 Gu D, Rao X, Dai D, et al. Laser additive manufacturing of carbon nanotubes (CNTs) reinforced aluminum matrix nanocomposites: Processing optimization, microstructure evolution and mechanical properties. Additive Manufacturing, 2019, 29: 100801 Putra N E, Leeflang M A, Minneboo M, et al. Extrusion-based 3D printed biodegradable porous iron. Acta Biomater, 2021, 121: 741–756 Azzeddine H, Hanna A, Dakhouche A, et al. Corrosion behaviour and cytocompatibility of selected binary magnesium-rare earth alloys. J Magnesium Alloys, 2021, 9: 581–591 Lei Z, Zhang H, Zhang E, et al. Antibacterial activities and biocompatibilities of Ti-Ag alloys prepared by spark plasma sintering and acid etching. Mater Sci Eng-C, 2018, 92: 121–131 Qi F, Wang Z, Yang L, et al. A collaborative CeO2@metal-organic framework nanosystem to endow scaffolds with photodynamic antibacterial effect. Mater Today Chem, 2023, 27: 101336 Bao M, Liu Y, Wang X, et al. Optimization of mechanical properties, biocorrosion properties and antibacterial properties of wrought Ti-3Cu alloy by heat treatment. Bioactive Mater, 2018, 3: 28–38 Chen X, Huang X, Zheng C, et al. Preparation of different sized nano-silver loaded on functionalized graphene oxide with highly effective antibacterial properties. J Mater Chem B, 2015, 3: 7020–7029 Geddes L, Themistou E, Burrows J F, et al. Evaluation of the in vitro cytotoxicity and modulation of the inflammatory response by the bioresorbable polymers poly(D,L-lactide-co-glycolide) and poly(L-lactide-co-glycolide). Acta Biomater, 2021, 134: 261–275 Lei Z, Zhang H, Zhang E, et al. Antibacterial activities and cell responses of Ti-Ag alloys with a hybrid micro- to nanostructured surface. J Biomater Appl, 2020, 34: 1368–1380 Zhang X, Lv Y, Cai G, et al. Reactive incorporation of Ag into porous TiO2 coating and its influence on its microstructure, in vitro antibacterial efficacy and cytocompatibility. Prog Nat Sci-Mater Int, 2021, 31: 215–229 Tilak Kumar J V, Sudha J, Padmanabhan K A, et al. Influence of strain rate and strain at temperature on TRIP effect in a metastable austenitic stainless steel. Mater Sci Eng-A, 2020, 777: 139046 Sun C, Xi S, Li J, et al. Mechanical alloying of the immiscible Cu-60 wt%Cr alloy: Phase transitions, microstructure, and thermodynamic characteristics. Mater Today Commun, 2021, 27: 102436 Fu X, Deng R Q, Kong X B, et al. Interfacial characterization and its influence on the corrosion behavior of Mg-SiO2 nanocomposites. Acta Mater, 2022, 230: 117840 Su K P, Wang H O, Huang S, et al. Magnetic anisotropy and enhanced remanence in textured polycrystalline MnAlCuC-based flakes. J Mater Sci, 2018, 53: 9823–9829 Kozawa T. Lattice deformation of LiNi05Mn15O4 spinel cathode for Li-ion batteries by ball milling. J Power Sources, 2019, 419: 52–57 Shuai C, Yang F, Shuai Y, et al. Silicon dioxide nanoparticles decorated on graphene oxide nanosheets and their application in poly(L-lactic acid) scaffold. J Adv Res, 2023, 48: 175–190 Kondoh K, Ichikawa E, Issariyapat A, et al. Tensile property enhancement by oxygen solutes in selectively laser melted titanium materials fabricated from pre-mixed pure Ti and TiO2 powder. Mater Sci Eng-A, 2020, 795: 139983 Chen X, Fu Q, Jin Y, et al. In vitro studying corrosion behavior of porous titanium coating in dynamic electrolyte. Mater Sci Eng-C, 2017, 70: 1071–1075 Aliyu A, Srivastava C. Microstructure and corrosion performance of AlFeCoNiCu high entropy alloy coatings by addition of graphene oxide. Materialia, 2019, 8: 100459 Shi Z Z, Gao X X, Chen H T, et al. Enhancement in mechanical and corrosion resistance properties of a biodegradable Zn-Fe alloy through second phase refinement. Mater Sci Eng-C, 2020, 116: 111197 Jiang Q, Lv X, Lu D, et al. The corrosion behavior and mechanical property of the Mg–7Y–xNd ternary alloys. J Magnesium Alloys, 2018, 6: 346–355 Safizadeh F, Sorour N, Ghali E, et al. Corrosion behavior of Fe-Mo and Fe-Mo-P cathodic coatings in the simulated electrolyte for sodium chlorate production. Electrochim Acta, 2018, 269: 340–349 Gomes L F, Kugelmeier C L, Garcia A, et al. Influences of alloying elements and dendritic spacing on the corrosion behavior of Al-Si-Ag alloys. J Mater Res Tech, 2021, 15: 5880–5893 Jia J, Cheng X, Yang X, et al. A study for corrosion behavior of a new-type weathering steel used in harsh marine environment. Construction Building Mater, 2020, 259: 119760 Yin M, Hou L, Wang Z, et al. Self-generating construction of applicable corrosion-resistant surface structure of magnesium alloy. Corrosion Sci, 2021, 184: 109378 Meng Y, Liu L, Zhang D, et al. Initial formation of corrosion products on pure zinc in saline solution. Bioactive Mater, 2019, 4: 87–96 Yan C, Xin Y, Chen X B, et al. Evading strength-corrosion tradeoff in Mg alloys via dense ultrafine twins. Nat Commun, 2021, 12: 4616 Li Y, Lu X, Mei D, et al. Passivation of corrosion product layer on AM50 Mg by corrosion inhibitor. J Magnesium Alloys, 2022, 10: 2563–2573 Zhao D, Han C, Peng B, et al. Corrosion fatigue behavior and anti-fatigue mechanisms of an additively manufactured biodegradable zinc-magnesium gyroid scaffold. Acta Biomater, 2022, 153: 614–629 Thekkepat K, Han H S, Choi J W, et al. Computational design of Mg alloys with minimal galvanic corrosion. J Magnesium Alloys, 2022, 10: 1972–1980 Wu L, Tan J, Chen S, et al. Catalyst-enhanced micro-galvanic effect of Cu3N/Cu-bearing NiTi alloy surface for selective bacteria killing. Chem Eng J, 2022, 447: 137484 Xiao K, Li Z, Song J, et al. Effect of concentrations of Fe2+ and Fe3+ on the corrosion behavior of carbon steel in Cl − and \({\rm{S}}{{\rm{O}}_4}^{2 - }\) aqueous environments. Met Mater Int, 2021, 27: 2623–2633 Young J, Reddy R G. Synthesis, mechanical properties, and in vitro corrosion behavior of biodegradable Zn-Li-Cu alloys. J Alloys Compd, 2020, 844: 156257 Liu C, Revilla R I, Li X, et al. New insights into the mechanism of localised corrosion induced by TiN-containing inclusions in high strength low alloy steel. J Mater Sci Tech, 2022, 124: 141–149 Dong H, Lin F, Boccaccini A R, et al. Corrosion behavior of biodegradable metals in two different simulated physiological solutions: Comparison of Mg, Zn and Fe. Corrosion Sci, 2021, 182: 109278 Zan J, Shuai Y, Zhang J, et al. Hyaluronic acid encapsulated silver metal organic framework for the construction of a slow-controlled bifunctional nanostructure: Antibacterial and anti-inflammatory in intrauterine adhesion repair. Int J Biol Macromolecules, 2023, 230: 123361 Liu L T, Li Y Z, Yu K P, et al. A novel stainless steel with intensive silver nanoparticles showing superior antibacterial property. Mater Res Lett, 2021, 9: 270–277 Qian G, Zhang L, Shuai Y, et al. 3D-printed CuFe2O4-MXene/PLLA antibacterial tracheal scaffold against implantation-associated infection. Appl Surf Sci, 2023, 614: 156108 Yuan B, Chen H, Zhao R, et al. Construction of a magnesium hydroxide/graphene oxide/hydroxyapatite composite coating on Mg-Ca-Zn-Ag alloy to inhibit bacterial infection and promote bone regeneration. Bioactive Mater, 2022, 18: 354–367 Feng P, Shen S, Shuai Y, et al. PLLA grafting draws GO from PGA phase to the interface in PLLA/PGA bone scaffold owing enhanced interfacial interaction. Sustain Mater Tech, 2023, 35: e00566 Shuai C, Chen X, He C, et al. Construction of magnetic nanochains to achieve magnetic energy coupling in scaffold. Biomater Res, 2022, 26: 38 Qi F, Liao R, Wu P, et al. An electrical microenvironment constructed based on electromagnetic induction stimulates neural differentiation. Mater Chem Front, 2023, 7: 1671–1683 Qian G, Wang J, Yang L, et al. A pH-responsive CaO2@ZIF-67 system endows a scaffold with chemodynamic therapy properties. J Mater Sci, 2023, 58: 1214–1228 Luo X, Yang C, Li R Y, et al. Effect of silicon content on the microstructure evolution, mechanical properties, and biocompatibility of β-type TiNbZrTa alloys fabricated by laser powder bed fusion. Bio-Mater Adv, 2022, 133: 112625 Xu W, Yu A, Jiang Y, et al. Gyroid-based functionally graded porous titanium scaffolds for dental application: Design, simulation and characterizations. Mater Des, 2022, 224: 111300