The effect of two types of C-S-H on the elasticity of cement-based materials: Results from nanoindentation and micromechanical modeling

Taplin, 1959, A method for following the hydration reaction in Portland cement paste, Aust. J. Appl. Sci., 10, 329 Dalgleis, 1981, Thin foil studies of hydrated cements, Cem. Concr. Res., 11, 729, 10.1016/0008-8846(81)90031-4 Groves, 1987, TEM studies of cement hydration, Mater. Res. Soc. Symp. Proc., 85, 3, 10.1557/PROC-85-3 Richardson, 1989, The porosity and pore structure of hydrated cement pastes as revealed by electron microscopy techniques, Mater. Res. Soc. Symp. Proc., 137, 313, 10.1557/PROC-137-313 Viehland, 1996, Mesostructure of calcium silicate hydrate (C-S-H) gels in Portland-cement paste—A short range ordering, nanocrystallinity and local compositional order, J. Am. Ceram. Soc., 79, 1731, 10.1111/j.1151-2916.1996.tb07990.x Richardson, 1999, The nature of C-S-H in hardened cements, Cem. Concr. Res., 29, 1131, 10.1016/S0008-8846(99)00168-4 Taylor, 1984, Studies on the chemistry and microstructure of cement pastes, Proc. Br. Ceram. Soc., 35, 65 Taylor, 1984, An electron microprobe study of a mature cement paste, Cem. Concr. Res., 14, 565, 10.1016/0008-8846(84)90134-0 Thomas, 1998, The surface area of cement paste as measured by neutron scattering: Evidence for two C-S-H morphologies, Cem. Concr. Res., 28, 897, 10.1016/S0008-8846(98)00049-0 Jennings, 2000, A model for the microstructure of calcium silicate hydrate in cement paste, Cem. Concr. Res., 30, 101, 10.1016/S0008-8846(99)00209-4 Tennis, 2000, A model for two types of calcium silicate hydrate in the microstructure of Portland cement pastes, Cem. Concr. Res., 30, 855, 10.1016/S0008-8846(00)00257-X Diamond, 1993, Microstructure of hardened cement paste—A new interpretation, J. Am. Ceram. Soc., 76, 2993, 10.1111/j.1151-2916.1993.tb06600.x Scrivener, 1985, Analysis of phases in cement paste using backscattered electron images, methanol adsorption and thermogravimetric analysis, Mater. Res. Soc. Symp. Proc., 85, 67, 10.1557/PROC-85-67 Taylor, 1997 F. Adenot, Durabilité du béton: Caractérisation et Modélisation des Processus Physiques et Chimiques de Dégradation du Ciment, PhD Dissertation, University of Orleans, France (1992) (in French). Carde, 1996, Leaching of both calcium hydroxide and C-S-H from cement paste: Modeling the mechanical behavior, Cem. Concr. Res., 26, 1257, 10.1016/0008-8846(96)00095-6 C. Carde, Caractérisation et Modélisation de l'altération des Proprietés Mécaniques Due a la Lixiviation des Matériaux Cimentaires, PhD Dissertation, INSA Toulouse, France (1996) (in French). Carde, 1997, Effect of the leaching of calcium hydroxide from cement paste on mechanical and physical properties, Cem. Concr. Res., 27, 539, 10.1016/S0008-8846(97)00042-2 Heukamp, 2001, Mechanical properties of calcium leached cement pastes: Triaxial stress states and the influence of the pore pressure, Cem. Concr. Res., 31, 767, 10.1016/S0008-8846(01)00472-0 F. Heukamp, F.-J. Ulm, J. Germaine, Poroplastic properties of calcium leached cement-based materials, Cem. Concr. Res., Submitted for publication. Ulm, 1999, Chemoporoplasticity of calcium leaching in concrete, ASCE J. Eng. Mech., 1200, 10.1061/(ASCE)0733-9399(1999)125:10(1200) F.-J. Ulm, F. Heukamp, Monitoring the durability performance of concrete in nuclear waste containment, Annual report, Department of Energy (2000). B. Gérard, Contribution des couplages mécanique-chimie-transfert dans la tenue à long terme des ouvrages de stockage des déchets radioactifs, PhD Dissertation, ENS Cachan, France (1996) (in French). Li, 1999, Effective Young's modulus estimation of concrete, Cem. Concr. Res., 29, 1455, 10.1016/S0008-8846(99)00119-2 Li, 1999, Four-phase sphere modeling of effective bulk modulus of concrete, Cem. Concr. Res., 29, 839, 10.1016/S0008-8846(99)00040-X Garboczi, 2001, Elastic moduli of a material containing composite inclusions: Effective medium theory and finite element computations, Mech. Mater., 33, 455, 10.1016/S0167-6636(01)00067-9 Garboczi, 1991, Digital-simulation of the aggregate–cement paste interfacial zone in concrete, J. Mater. Res., 6, 196, 10.1557/JMR.1991.0196 Simeonov, 1995, Effect of transition zone on the elastic behavior of cement-based composites, Cem. Concr. Res., 25, 165, 10.1016/0008-8846(94)00124-H Yang, 1996, Double inclusion model for approximate elastic moduli of concrete material, Cem. Concr. Res., 26, 83, 10.1016/0008-8846(95)00196-4 Yang, 1998, Effect of the transition zone on the elastic moduli of mortar, Cem. Concr. Res., 28, 727, 10.1016/S0008-8846(98)00035-0 Ramesh, 1996, Effect of transition zone on elastic moduli of concrete materials, Cem. Concr. Res., 26, 611, 10.1016/0008-8846(96)00016-6 Stutzman, 1999, Specimen preparation for scanning electron microscopy, 10 Faucon, 1999, Aluminum incorporation in calcium silicate hydrate (C-S-H) depending on their Ca/Si ratio, J. Phys. Chem., B, 103, 7796, 10.1021/jp990609q Porteneuve, 2001, Nuclear magnetic resonance characterization of high- and ultrahigh-performance concrete: Application to the study of water leaching, Cem. Concr. Res., 31, 1887, 10.1016/S0008-8846(01)00648-2 Venkatesh, 2000, Determination of elasto-plastic properties by instrumented sharp indentation: Guidelines for property extraction, Scr. Mater., 42, 833, 10.1016/S1359-6462(00)00311-0 Zhu, 2000, Application of depth-sensing microindentation testing to study of interfacial transition zone in reinforced concrete, Cem. Concr. Res., 30, 1299, 10.1016/S0008-8846(00)00322-7 Oliver, 1992, An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments, J. Mater. Res., 7, 1564, 10.1557/JMR.1992.1564 Doerner, 1986, A method for interpreting the data from depth sensing indentation instruments, J. Mater. Res., 1, 601, 10.1557/JMR.1986.0601 Giannakopoulos, 1999, Determination of elastoplastic properties by instrumented sharp indentation, Scr. Mater., 40, 1191, 10.1016/S1359-6462(99)00011-1 Giannakopoulos, 1994, Analysis of vickers indentation, Int. J. Solids Struct., 31, 2679, 10.1016/0020-7683(94)90225-9 Acker, 2001, Micromechanical analysis of creep and shrinkage mechanisms Beaudoin, 1986, Dependence of degree of silica polymerization and intrinsic mechanical properties of C-S-H on C/S ASTM C 597-83, Standard test method for pulse velocity through concrete. H.F.W. Taylor, BS 1881: Part 203, Ultrasonic Pulse Velocity meauserements, BS. Malhotra, 1976 C.L. Bellégo, Couplages chimie-mécanique dans les structures en béton attaquées par l'eau: Étude expérimentale et analyse numérique, PhD Dissertation, ENS Cachan, France (2001) (in French). G. Constantinides, F.-J. Ulm, The elastic properties of calcium-leached cement pastes and mortars: A multi-scale investigation, MIT CEE Report R02–01. A. Zaoui, Materiaux heterogenes et composites, lecture notes, Ecole Polytechnique, Paris (1997) (in French). Mori, 1973, Average stress in matrix and average elastic energy of materials with misfitting inclusions, Acta Metall., 21, 571, 10.1016/0001-6160(73)90064-3 Christensen, 1990, A critical evaluation for a class of micromechanics models, J. mech. phys. solids, 38, 379, 10.1016/0022-5096(90)90005-O Hashin, 1962, The elastic moduli of heterogenous material, J. Appl. Mech. Transactions of the ASME, 29, 143, 10.1115/1.3636446 Hashin, 1983, Analysis of composite-materials—A survey, J. Appl. Mech. Transactions of the ASME, 50, 481, 10.1115/1.3167081 Eshelby, 1957, The determination of the elastic field of an ellipsoidal inclusion, Proc. R. Soc. Lond. A, 241, 376, 10.1098/rspa.1957.0133 Beaudoin, 1983, Comparison of mechanical properties of compacted calcium hydroxide and portland cement paste systems, Cem. Concr. Res., 13, 319, 10.1016/0008-8846(83)90030-3 Wittmann, 1986, Estimation of the modulus of elasticity of calcium hydroxide, Cem. Concr. Res., 16, 971, 10.1016/0008-8846(86)90021-9 Monteiro, 1995, The elastic-moduli of calcium hydroxide, Cem. Concr. Res., 25, 1605, 10.1016/0008-8846(95)00154-9 Velez, 2001, Determination by nanoindentation of elastic modulus and hardness of pure constituents of Portland cement clinker, Cem. Concr. Res., 31, 555, 10.1016/S0008-8846(00)00505-6 Zhu, 1997, Assessment of interfacial microstructure and bond properties in aged GRC using a novel microindentation method, Cem. Concr. Res., 27, 1701, 10.1016/S0008-8846(97)00155-5 Odler, 1988, Structure and bond strength of cement aggregates interfaces, vol. 114, 21 Garboczi, 1997, Analytical formulas of interfacial transition zone properties, Adv. Cem. Based Mater., 6, 99, 10.1016/S1065-7355(97)90016-X Lutz, 1997, Inhomogeneous interfacial transition zone model for the bulk modulus of mortar, Cem. Concr. Res., 27, 1113, 10.1016/S0008-8846(97)00086-0