Sustainable one-part geopolymer foams with glass fines versus sand as aggregates

Provis, 2017, Alkali-activated materials, Cem. Concr. Res. Abdollahnejad, 2017, Cost-efficient one-part alkali-activated mortars with low global warming potential for floor heating systems applications, Eur. J. Environ. Civil Eng., 21, 412, 10.1080/19648189.2015.1125392 Nazari, 2016 Provis, 2009 Hajimohammadi, 2016, Dissolution behaviour of source materials for synthesis of geopolymer binders: a kinetic approach, Int. J. Miner. Process., 153, 80, 10.1016/j.minpro.2016.05.014 Nazari, 2015, Synthesis of geopolymer from industrial wastes, J. Cleaner Prod., 99, 297, 10.1016/j.jclepro.2015.03.003 Provis, 2014, Geopolymers and other alkali activated materials: why, how, and what?, Mater. Struct., 47, 11, 10.1617/s11527-013-0211-5 Pan, 2011, Fracture properties of geopolymer paste and concrete, Mag. Concr. Res., 63, 763, 10.1680/macr.2011.63.10.763 Abdollahnejad, 2015, Development of foam one-part geopolymers with enhanced thermal insulation performance and low carbon dioxide emissions, Adv. Mater. Res., 1129, 565, 10.4028/www.scientific.net/AMR.1129.565 Luukkonen, 2018, One-part alkali-activated materials: a review, Cem. Concr. Res., 103, 21, 10.1016/j.cemconres.2017.10.001 Hajimohammadi, 2017, How does aluminium foaming agent impact the geopolymer formation mechanism?, Cem. Concr. Compos., 80, 277, 10.1016/j.cemconcomp.2017.03.022 Swamy, 2002 Rajabipour, 2015, Alkali–silica reaction: current understanding of the reaction mechanisms and the knowledge gaps, Cem. Concr. Res., 76, 130, 10.1016/j.cemconres.2015.05.024 Williamson, 2016, The role of activating solution concentration on alkali–silica reaction in alkali-activated fly ash concrete, Cem. Concr. Res., 83, 124, 10.1016/j.cemconres.2016.02.008 Matalkah, 2018, Synthesis and characterization of alkali aluminosilicate hydraulic cement that meets standard requirements for general use, Constr. Build. Mater., 158, 42, 10.1016/j.conbuildmat.2017.10.002 Afshinnia, 2016, Impact of combined use of ground glass powder and crushed glass aggregate on selected properties of Portland cement concrete, Constr. Build. Mater., 117, 263, 10.1016/j.conbuildmat.2016.04.072 Richard, 2013, Experimental production of sustainable lightweight foamed concrete, Br. J. Appl. Sci. Technol., 3, 994, 10.9734/BJAST/2013/4242 Nambiar, 2008, Fresh state characteristics of foam concrete, J. Mater. Civ. Eng., 20, 111, 10.1061/(ASCE)0899-1561(2008)20:2(111) Ramamurthy, 2009, A classification of studies on properties of foam concrete, Cem. Concr. Compos., 31, 388, 10.1016/j.cemconcomp.2009.04.006 Zhang, 2015, Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete, Cem. Concr. Compos., 62, 97, 10.1016/j.cemconcomp.2015.03.013 Kearsley, 2006, The use of foamcrete for affordable development in third world countries, Concr. Serv. Mankind: Appropriate Concr. Technol., 3, 232 Hajimohammadi, 2017, Alkali activated slag foams: the effect of the alkali reaction on foam characteristics, J. Cleaner Prod., 147, 330, 10.1016/j.jclepro.2017.01.134 Hajimohammadi, 2017, Pore characteristics in one-part mix geopolymers foamed by H2O2: the impact of mix design, Mater. Des., 130, 381, 10.1016/j.matdes.2017.05.084 Abdollahnejad, 2015, Mix design, properties and cost analysis of fly ash-based geopolymer foam, Constr. Build. Mater., 80, 18, 10.1016/j.conbuildmat.2015.01.063 Sanjayan, 2015, Physical and mechanical properties of lightweight aerated geopolymer, Constr. Build. Mater., 79, 236, 10.1016/j.conbuildmat.2015.01.043 Torres-Carrasco, 2015, Waste glass in the geopolymer preparation. Mechanical and microstructural characterisation, J. Cleaner Prod., 90, 397, 10.1016/j.jclepro.2014.11.074 Bernal, 2016, Management and valorisation of wastes through use in producing alkali-activated cement materials, J. Chem. Technol. Biotechnol., 91, 2365, 10.1002/jctb.4927 Cyr, 2012, Properties of inorganic polymer (geopolymer) mortars made of glass cullet, J. Mater. Sci., 47, 2782, 10.1007/s10853-011-6107-2 Badanoiu, 2015, Preparation and characterization of foamed geopolymers from waste glass and red mud, Constr. Build. Mater., 84, 284, 10.1016/j.conbuildmat.2015.03.004 Hajimohammadi, 2017, Characterisation of one-part geopolymer binders made from fly ash, Waste Biomass Valorization, 8, 225, 10.1007/s12649-016-9582-5 Hajimohammadi, 2017, Solid reactant-based geopolymers from rice hull ash and sodium aluminate, Waste Biomass Valorization, 8, 2131, 10.1007/s12649-016-9735-6 Lecoq, 2003, Fragmentation by high velocity impact on a target: a material grindability test, Powder Technol., 133, 113, 10.1016/S0032-5910(03)00085-8 A. 1012.13-2015, Methods of Testing Concrete; Method 13: Determination of the Drying Shrinkage of Concrete for Samples Prepared in the Field or in the Laboratory, Standards Australia, Sydney, Australia, 2015. ISOCHEM, Isotech s.r.l. – Via G. Viviani 4, I-56029 Santa Croce sull’Arno, Italy. Cha, 2012, Building materials thermal conductivity measurement and correlation with heat flow meter, laser flash analysis and TCi, J. Therm. Anal. Calorim., 109, 295, 10.1007/s10973-011-1760-x Grassl, 2010, Influence of aggregate size and volume fraction on shrinkage induced micro-cracking of concrete and mortar, Cem. Concr. Res., 40, 85, 10.1016/j.cemconres.2009.09.012 Fathifazl, 2011, Creep and drying shrinkage characteristics of concrete produced with coarse recycled concrete aggregate, Cem. Concr. Compos., 33, 1026, 10.1016/j.cemconcomp.2011.08.004 Konsta-Gdoutos, 2010, Multi-scale mechanical and fracture characteristics and early-age strain capacity of high performance carbon nanotube/cement nanocomposites, Cem. Concr. Compos., 32, 110, 10.1016/j.cemconcomp.2009.10.007 Ramamurthy, 2009, A classification of studies on properties of foam concrete, Cem. Concr. Compos., 31, 388, 10.1016/j.cemconcomp.2009.04.006 Nambiar, 2009, Shrinkage behavior of foam concrete, J. Mater. Civ. Eng., 21, 631, 10.1061/(ASCE)0899-1561(2009)21:11(631) Abdollahnejad, 2018, 42 Rao, 2001, Long-term drying shrinkage of mortar — influence of silica fume and size of fine aggregate, Cem. Concr. Res., 31, 171, 10.1016/S0008-8846(00)00347-1 F. Puertas, M. Torres-Carrasco, C. Varga, J. Torres, E. Moreno, J. Palomo, F. Puertas, M. Torres-Carrasco, C. Varga, J. Torres, Re-use of urban and industrial glass waste to prepare alkaline cements, in: 4th International Conference on Engineering for Waste and Biomass Valorization, Oporto (Portugal), 2012. Provis, 2013, Alkali-activated materials: State-of-the-Art Report Husem, 2003, The effects of bond strengths between lightweight and ordinary aggregate-mortar, aggregate-cement paste on the mechanical properties of concrete, Mater. Sci. Eng., A, 363, 152, 10.1016/S0921-5093(03)00595-1 Qu, 2017, Previous and present investigations on the components, microstructure and main properties of autoclaved aerated concrete–A review, Constr. Build. Mater., 135, 505, 10.1016/j.conbuildmat.2016.12.208 Zhang, 2016, The pore characteristics of geopolymer foam concrete and their impact on the compressive strength and modulus, Front. Mater., 3, 38, 10.3389/fmats.2016.00038 Hajimohammadi, 2018, Enhancing the strength of pre-made foams for foam concrete applications, Cem. Concr. Compos., 87, 164, 10.1016/j.cemconcomp.2017.12.014 Amran, 2015, Properties and applications of foamed concrete; a review, Constr. Build. Mater., 101, 990, 10.1016/j.conbuildmat.2015.10.112 Zhang, 2014, Geopolymer foam concrete: an emerging material for sustainable construction, Constr. Build. Mater., 56, 113, 10.1016/j.conbuildmat.2014.01.081 Hajimohammadi, 2017, Regulating the chemical foaming reaction to control the porosity of geopolymer foams, Mater. Des., 120, 255, 10.1016/j.matdes.2017.02.026 Kim, 2003, An experimental study on thermal conductivity of concrete, Cem. Concr. Res., 33, 363, 10.1016/S0008-8846(02)00965-1