Environmental aspects of laser-based and conventional tool and die manufacturing

U.S. International Trade Commission (USITC). Tools, dies and industrial molds: competitive conditions in the United States and selected foreign markets; 2002. U.S. Environmental Protection Agency (USEPA), Fabricated Metal Products Industry, EPA Office of Compliance Sector Notebook Project EPA/310-R-95-007; 1995. Sutherland JW, Skerlos SJ, Olson WW, Gunter KL, Khadke K, Zimmerman J. Environmentally benign manufacturing: status and vision for the future. In: NAMRI/SME Transactions 2003, vol. 31. Dearborn, MI: Society of Manufacturing Engineers; 2003. Lund, 1996 Das, 1999, Processing of titanium net shapes by SLS/HIP, Materials and Design, 20, 115, 10.1016/S0261-3069(99)00017-5 Stewart, 1999, Strength of the DTM RapidSteel™ 1.0 material, Materials and Design, 20, 133, 10.1016/S0261-3069(99)00019-9 Sachs, 1992, Three dimensional printing: rapid tooling and prototypes directly from a CAD model, Journal of Engineering for Industry, 114, 481, 10.1115/1.2900701 Jackson, 1999, Modeling and designing functionally graded material components for fabrication with local composition control, Materials and Design, 20, 63, 10.1016/S0261-3069(99)00011-4 D-M-E Corporation Ex-One Corporation Griffith, 1999, Understanding thermal behavior in the LENS process, Materials and Design, 20, 107, 10.1016/S0261-3069(99)00016-3 Milewski, 1998, Directed light fabrication of a solid metal hemisphere using 5-axis powder deposition, Journal of Materials Processing Technology, 75, 165, 10.1016/S0924-0136(97)00321-X Milewski, 1999, Application of a manufacturing model for the optimization of additive processing of Inconel alloy 690, Journal of Materials Processing Technology, 91, 18, 10.1016/S0924-0136(98)00412-9 Mazumder, 1999, Direct materials deposition: designed macro and microstructure Mazumder, 2000, Closed loop direct metal deposition: art to part, Optics and Lasers in Engineering, 34, 397, 10.1016/S0143-8166(00)00072-5 Natu H, Byers M, Mazumder J. Annual research report: center for laser-aided intelligent manufacturing; 2000. D'Souza J. Laser-aided direct metal deposition of three-dimensional components: optimization of process parameters and its effect on microstructure, cooling rates and mechanical properties. Master's thesis, The University of Michigan; 2001. Shin, 2003, A method for the design and fabrication of heterogeneous objects, Materials and Design, 24, 339, 10.1016/S0261-3069(03)00060-8 POM Group Jacobs, 2000, The express tool process Kalpakjian, 2003 Roberts, 1998 Timken-Latrobe Specialty Steels United States Steel (USS), 1985 United States Steel (USS), 1998, The making, shaping, and treating of steel, vol. 2 U.S. Department of Energy Office of Industrial Technologies. Energy and environmental profile of the U.S. iron and steel industry. DOE/EE-0229; 2000. DTE Energy Andersen, 2001, Energy and material flow models for the US steel industry, Energy, 26, 137, 10.1016/S0360-5442(00)00053-0 Worrell, 1997, Energy intensity in the iron and steel industry: a comparison of physical and economic indicators, Energy Policy, 25, 727, 10.1016/S0301-4215(97)00064-5 Worrell, 2001, Energy efficiency and carbon dioxide emissions reduction opportunities in the US iron and steel sector, Energy, 26, 513, 10.1016/S0360-5442(01)00017-2 Yule, 1994 German, 1998 Thummler, 1993 Bocchini, 1992, Comparisons between various techniques suitable to produce equivalent mechanical components on the basis of environmental impact, vol. 4 Diaz-Triana, 2001, Environmental trends for the U.S. powder metallurgy industry Atlan, 2001, Manufacturing of dies and molds, Annals of the CIRP, 50, 405 Rosato, 2000 Fallbohmer, 1996, Survey of the die and mold manufacturing industry, Journal of Materials Processing Technology, 59, 158, 10.1016/0924-0136(96)02297-2 Kemna RBJ. Energiebewust Ontwerpen. TU Delft, The Netherlands 1981. Accessed as part of the SimaPro software Data Archive database. Shibuki, 1994, Diamond coating on WC-Co and WC for cutting tools, Surface Coatings and Technology, 68/69, 369, 10.1016/0257-8972(94)90187-2 Fallbohmer, 2000, High-speed machining of cast iron and alloy steels for die and mold manufacturing, Journal of Materials Processing Technology, 98, 104, 10.1016/S0924-0136(99)00311-8