An investigation into the acoustic insulation of triple-layered panels containing Newtonian fluids: Theory and experiment

Beranek, 1949, Sound transmission through multiple structures containing flexible blankets, J Acoust Soc Am, 21, 419, 10.1121/1.1906530 Mangiarotty, 1963, Optimization of the mass distribution and the air spaces in multiple-element soundproofing structures, J Acoust Soc Am, 35, 1023, 10.1121/1.1918648 Mulholland, 1968, Transmission loss of multiple panels in a random incidence field, J Acoust Soc Am, 43, 1432, 10.1121/1.1911003 London, 1950, Transmission of reverberant sound through double walls, J Acoust Soc Am, 22, 270, 10.1121/1.1906601 Ford, 1968, Practical problems of partition design, J Acoust Soc Am, 43, 1062, 10.1121/1.1910940 Mulholland, 1967, The transmission loss of double panels, J Sound Vib, 6, 324, 10.1016/0022-460X(67)90205-2 Trochidis, 1986, Sound transmission through double partitions with cavity absorption, J Sound Vib, 107, 321, 10.1016/0022-460X(86)90241-5 Fringuellino, 2000, Progressive impedance method for the classical analysis of acoustic transmission loss in multilayered walls, Appl Acoust, 59, 275, 10.1016/S0003-682X(99)00024-9 Craik, 2000, Sound transmission through double leaf lightweight partitions. Part I: airborne sound, Appl Acoust, 61, 223, 10.1016/S0003-682X(99)00070-5 Craik, 2000, Sound transmission through lightweight parallel plates. Part II: structure-borne sound, Appl Acoust, 61, 247, 10.1016/S0003-682X(99)00071-7 Tadeu, 2001, Sound transmission through single, double and triple glazing. Experimental evaluation, Appl Acoust, 62, 307, 10.1016/S0003-682X(00)00032-3 Tadeu, 2004, Sound insulation provided by single and double panel walls – a comparison of analytical solutions versus experimental results, Appl Acoust, 65, 15, 10.1016/j.apacoust.2003.07.003 Chazot, 2007, Prediction of transmission loss of double panels with a patch-mobility method, J Acoust Soc Am, 121, 267, 10.1121/1.2395920 Mahjoob MJ, Mohammadi N. Modeling ER/MR-based smart panels for noise and acoustic treatment. In: Proceedings of the international conference on modeling and simulation-MS2006, Kuala Lumpur, Malaysia, 2006. Ruder Jr FF. Airborne sound transmission loss characteristics of wood-frame construction. General technical report FPL-43. Madison, WI: US department of agriculture, forest service, forest products laboratory, 1986. Tao Z, Seybert AF. A review of current techniques for measuring muffler transmission loss. SAE 2003 noise and vibration conference and exhibition, Grand Traverse, MI, USA, 2003-01-1653. Song, 2000, A transfer-matrix approach for estimating the characteristic impedance and wave numbers of limp and rigid porous materials, J Acoust Soc Am, 107, 1131, 10.1121/1.428404 Song, 2001, Effect of circumferential edge constraint on the acoustical properties of glass fiber materials, J Acoust Soc Am, 110, 2902, 10.1121/1.1413752 Young, 1975, Prediction of transmission loss in mufflers by the finite-element method, J Acoust Soc Am, 57, 144, 10.1121/1.380424 Munjal, 1990, Theory of a two source-location method for direct experimental evaluation of the four-pole parameters of an aeroacoustic element, J Sound Vib, 141, 323, 10.1016/0022-460X(90)90843-O Pispola, 2005, Transmission loss measurement of consolidated granular media (L), J Acoust Soc Am, 117, 2716, 10.1121/1.1886365 Standard ASTM E1050-98. Standard test method for impedance and absorption of acoustical materials using a tube, two microphones and a digital frequency analysis system; 1998. Standard ISO 10534-2. Acoustics-determination of sound absorption coefficient and impedance in impedance tubes-Part 2: transfer-function method; 1998. Fahy, 2001 Bies, 2003