Experimental study on the use of rejuvenators and plastomeric polymers for improving durability of high RAP content asphalt mixtures

http://www.transport-research.info/project/re-road-end-life-strategies-asphalt-pavements. Last accessed 15 January 2017. Ali, 2016, Investigation of impact of aging and amount of reclaimed asphalt pavement on effectiveness of rejuvenators, Constr. Build. Mater., 110, 211, 10.1016/j.conbuildmat.2016.02.013 Izaks, 2015, Hot mix asphalt with high RAP content, Procedia Eng., 114, 676, 10.1016/j.proeng.2015.08.009 Silva, 2012, Are totally recycled hot mix asphalts a sustainable alternative for road paving?, Resour. Conserv. Recycl., 60, 38, 10.1016/j.resconrec.2011.11.013 Copeland, 2011 I.L. Al-Qadi, L. Imad, Q. Aurangzeb, S.H. Carpenter, J. Pine William, & J. Trepanier, Impact of High RAP Content on Structural and Performance Properties of Asphalt Mixtures.Technical Report. Illinois Center for Transportation No. 12-002 (2012). Bonaquist, 2007, Can I run more RAP?, HMAT: Hot Mix Asphalt Technol., 12, 11 C. Van Winkle, H. Lee, R.C. Williams, S. Schram, Laboratory and field evaluation of HMA with high content of recycled asphalt pavement, in: Transportation Research Board 94th Annual Meeting (No. 15-5175), 2015. Zaumanis, 2015, Review of very high-content reclaimed asphalt use in plant-produced pavements: state of the art, Int. J. Pavement Eng., 16, 39, 10.1080/10298436.2014.893331 R.S. McDaniel, H. Soleymani, R.M. Anderson, P. Turner, R. Peterson, Recommended use of reclaimed asphalt pavement in the Superpave mix design method. NCHRP Web document, 30, 2000. G.R. Kemp, N.H. Predoehl, A comparison of field and laboratory environments on asphalt durability, in: Association of Asphalt Paving Technologists Proceedings, vol. 50, 1981. pp. 492–537. Tran, 2012 J.A. Epps, D.N. Little, R.J. Holmgreen, R.L. Terrel, Guidelines for Recycling Pavement Materials. NCHRP Report, 224, 1980. Karlsson, 2006, Material-related aspects of asphalt recycling-state-of-the-art, J. Mater. Civ. Eng., 18, 81, 10.1061/(ASCE)0899-1561(2006)18:1(81) Shen, 2004, Validation of performance-based method for determining rejuvenator content in HMA, Int. J. Pavement Eng., 5, 103, 10.1080/10298430410001733509 H. Lehtimäki, M.S. Tech, Rejuvenating RAP with light oil products and a new mixing method for hot in-plant recycling. Via Nordica, Congress Reykjavik (2012) 1(8). J. Potter, J. Mercer, Full-scale performance trials and accelerated testing of hot-mix recycling in the UK, in: Eighth International Conference on Asphalt Pavements – ISAP, 1997. pp. 593–607. Giustozzi, 2015, Mix design of polymer-modified and fiber-reinforced warm-mix asphalts with high amount of reclaimed asphalt pavement: achieving sustainable and high-performing pavements, Transp. Res. Rec., 3, 10.3141/2523-01 Carpenter, 1980, Modifier influence in the characterization of hot-mix recycled material, Transp. Res. Rec., 15 M. Zaumanis, R.B. Mallick, R. Frank, Use of rejuvenators for production of sustainable high content RAP hot mix asphalt,in: XXVIII International Baltic Road Conference, 2013, pp.1–10. N. Tran, A. Taylor, R. Willis, Effect of rejuvenator on performance properties of HMA mixtures with high RAP AND RAS Contents, NCAT Report 12–05, 2012. Lee, 1983, Test for efficiency of mixing of recycled asphalt paving mixtures, Tansp. Res. Rec., 911, 51 Kuang, 2011, A new approach for evaluating rejuvenator diffusing into aged bitumen, J. Wuhan Univ. Technol. Mater. Sci. Ed., 26, 43, 10.1007/s11595-011-0164-x Abreu, 2015, Recycled asphalt mixtures produced with high percentage of different waste materials, Constr. Build. Mater., 84, 230, 10.1016/j.conbuildmat.2015.03.063 E. Community & S.F. Programme, Re-Road – Summary Report, 2013. R. West, J.R. Willis, M. Marasteanu, Improved Mix Design, Evaluation, and Materials Management Practices for Hot Mix Asphalt with High Reclaimed Asphalt Pavement Content (NCHRP Report 752), 2013. B. Huang, W.R. Kingery, Z. Zhang, Laboratory study of fatigue characteristics of HMA mixtures containing RAP, in: International Symposium on Design and Construction of Long Lasting Asphalt Pavements, Auburn, Alabama, USA, 2004, pp. 501–522. Shen, 2007, Effects of rejuvenating agents on superpave mixtures containing reclaimed asphalt pavement, J. Mater. Civ. Eng., 19, 376, 10.1061/(ASCE)0899-1561(2007)19:5(376) European Standard EN 12697-1, Bituminous Mixtures: Test Methods for Hot Mix Asphalt. Part 1: Soluble Binder Content, 2012. European Standard EN 12697-3, Bituminous Mixtures – Test Methods for Hot Mix Asphalt - Part 3: Bitumen Recovery: Rotary Evaporator, 2005. European Standard EN 1426, Bitumen and Bituminous Binders: Determination of the Needle Penetration, 2015. European Standard EN 933-1, Tests for Geometrical Properties of Aggregates – Part 1: Determination of Particle Size Distribution – Sieving Method, 2012. Instituto Nacional de Vías Especificaciones Generales de Construcción de Carreteras INV E-450. European Standard EN 12697-31, Bituminous Mixtures. Test Methods for Hot Mix Asphalt. Specimen Preparation by Gyratory Compactor, 2007. ASTM International ASTM D 2041, Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures, 2011. American Association of State Highway and Transportation Officials AASHTO T 166, Bulk Specific Gravity of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens, 2016. European Standard EN 12697-8, Bituminous Mixtures. Test Methods for Hot Mix Asphalt. Determination of Void Characteristics of Bituminous Specimens, 2003. European Standard EN 12697-26, Bituminous Mixtures. Test Methods for Hot Mix Asphalt. Stiffness, 2012. European Standard EN 12697-25, Bituminous Mixtures. Test Methods for Hot Mix Asphalt. Cyclic Compression Test, 2016. J. Preciado, G. Martinez-Arguelles, M. Dugarte, A. Bonicelli, J. Cantero, D. Vega, Y. Barros, Improving mechanical properties of hot mix asphalt using fibers and polymers in developing countries, in: World Multidisciplinary Civil Engineering – Architecture – Urban Planning Symposium. Prague, 2017. To be published in Procedia Journal. Boriack, 2014 Christensen, 2003, Hirsch model for estimating the modulus of asphalt concrete, J. Assoc. Asphalt Paving Technol., 72