Highly sensing and transducing materials for potentiometric ion sensors with versatile applicability
Tài liệu tham khảo
Bakker, 1997, Carrier-based ion-selective electrodes and bulk optodes. 1. General characteristics, Chem Rev, 97, 3083, 10.1021/cr940394a
Bakker, 1998, Carrier-based ion-selective electrodes and bulk optodes. 2. Ionophores for potentiometric and optical sensors, Chem Rev, 98, 1593, 10.1021/cr970113+
Bobacka, 2008, Potentiometric ion sensors, Chem Rev, 108, 329, 10.1021/cr068100w
Mikhelson, 2013, Ion-selective electrodes, Lecture Notes in Chemistry, Berlin, Springer, 81, 1, 10.1007/978-3-642-36886-8_1
Ivanova, 2012, Problems and prospects of solid contact ion-selective electrodes with ionophore-based membranes, Russ Chem Bull, 61, 926, 10.1007/s11172-012-0136-0
Michalska, 2012, All-solid-state ion selective and all-solid-state reference electrodes, Electroanalysis, 24, 1253, 10.1002/elan.201200059
Mikhelson, 2015, Advances and trends in ionophore-based chemical sensors, Russ Chem Rev, 84, 555, 10.1070/RCR4506
Pechenkina, 2015, Materials for the ionophore-based membranes for ion-selective electrodes: problems and achievements, Russ J Electrochem, 51, 93, 10.1134/S1023193515020111
Ray, 2019, Bio-integrated wearable systems: a comprehensive review, Chem Rev, 119, 5461, 10.1021/acs.chemrev.8b00573
Alahi, 2019, Literature review, 7
Krikstolaityte, 2020, Paper as sampling substrates and all-integrating platforms in potentiometric ion determination, Trends Anal Chem, 133, 10.1016/j.trac.2020.116070
Zhang, 2020, A state-of-the-art review on Ag/AgCl ion-selective electrode used for non-destructive chloride detection in concrete, Compos Part B: Eng, 200, 10.1016/j.compositesb.2020.108289
Schnorr, 2011, Emerging applications of carbon nanotubes, Chem Mater, 23, 646, 10.1021/cm102406h
Vlasov, 2010, Chemical sensors and their systems, J Anal Chem, 65, 880, 10.1134/S1061934810090029
Mirica, 2013, Rapid prototyping of carbon-based chemiresistive gas sensors on paper, Proc National Acad Sci USA, 110, E3265, 10.1073/pnas.1307251110
Schnorr, 2013, Sensory arrays of covalently functionalized single walled carbon nanotubes for explosive detection, Adv Funct Mater, 23, 5285, 10.1002/adfm.201300131
Fennell, 2017, Chemiresistor devices for chemical warfare agent detection based on polymer wrapped single-walled carbon nanotubes, Sensors, 17, 982, 10.3390/s17050982
Rose, 2006, Chemosensory lasing action for detection of TNT and other analytes, Proc SPIE, 6333, 63330Y, 10.1117/12.683988
Costa, 2018, Tumor cell cholesterol depletion and V-ATPase inhibition as an inhibitory mechanism to prevent cell migration and invasiveness in melanoma, Biochim Biophys Acta-General Subjects, 1862, 684, 10.1016/j.bbagen.2017.12.006
Ummadi, 2016, Carbon-based solid-state calcium ion-selective microelectrode and scanning electrochemical microscopy: A quantitative study of pH-dependent release of calcium ions from bioactive glass, Anal Chem, 88, 3218, 10.1021/acs.analchem.5b04614
Miyamoto, 2021, Detection of hydrogen permeation through pure iron with light-addressable potentiometric sensor, ISIJ Int, 61, 1330, 10.2355/isijinternational.ISIJINT-2020-560
Yoshinobu, 2021, Light-addressable potentiometric sensors for cell monitoring and biosensing, Current Opinion Electrochem, 28, 10.1016/j.coelec.2021.100727
Liang, 2021, Multiplexed all-solid-state ion-sensitive light-addressable potentiometric sensor (ISLAPS) system based on silicone-rubber for physiological ions detection, Anal Chim Acta, 1179, 10.1016/j.aca.2021.338603
Privett, 2010, Electrochemical sensors, Anal Chem, 82, 4723, 10.1021/ac101075n
Bakker, 2016, Electroanalysis with membrane electrodes and liquid–liquid interfaces, Anal Chem, 88, 395, 10.1021/acs.analchem.5b04034
Sosa, 2015, Antimony film screen-printed carbon electrode for stripping analysis of Cd(II), Pb(II), and Cu(II) in natural samples, Anal Chim Acta, 855, 34, 10.1016/j.aca.2014.12.011
Liu, 2016, A disposable expanded graphite paper electrode with self-doped sulfonated polyaniline/antimony for stripping voltammetric determination of trace Cd and Pb, Anal Methods, 8, 1618, 10.1039/C5AY03094C
Dahaghin, 2018, Simultaneous determination of lead(II) and cadmium(II) at a glassy carbon electrode modified with GO@Fe3O4@benzothiazole-2-carboxaldehyde using square wave anodic stripping voltammetry, J Mol Liq, 249, 1125, 10.1016/j.molliq.2017.11.114
Deshmukh, 2018, EDTA-PANi/SWCNTs nanocomposite modified electrode for electrochemical determination of copper(II), lead(II) and mercury(II) ions, Electrochim Acta, 259, 930, 10.1016/j.electacta.2017.10.131
Park, 2017, Long-life heavy metal ions sensor based on graphene oxide-anchored conducting polymer, Electroanalysis, 29, 514, 10.1002/elan.201600494
Mishra, 2017, Electrospinning of graphene-oxide onto screen printed electrodes for heavy metal biosensor, Sens Actuators B, 247, 366, 10.1016/j.snb.2017.03.059
Ali, 2017, Microfluidic impedimetric sensor for soil nitrate detection using graphene oxide and conductive nanofibers enabled sensing interface, Sens Actuators B, 239, 1289, 10.1016/j.snb.2016.09.101
Bansod, 2017, A review on various electrochemical techniques for heavy metal ions detection with different sensing platforms, Biosens Bioelectron, 94, 443, 10.1016/j.bios.2017.03.031
Jansod, 2019, Tunable Optical Sensing with PVC Membrane Based Ion-Selective Bipolar Electrodes, ACS Sens, 4, 1008, 10.1021/acssensors.9b00179
Yilmaz, 2019, Potentiometric Selectivities of Ionophore-Doped Ion-Selective Membranes: Concurrent Presence of Primary Ion or Interfering Ion Complexes of Multiple Stoichiometries, Anal Chem, 91, 2409, 10.1021/acs.analchem.8b05196
Chen, 2021, Electrochemical Detection of Electrolytes Using a Solid-State Ion-Selective Electrode of Single-Piece Type Membrane, Biosensors, 11, 109, 10.3390/bios11040109
Pathak, 2021, Flexible copper-biopolymer nanocomposite sensors for trace level lead detection in water, Sensors Actuators B, 344, 10.1016/j.snb.2021.130263
Wang, 2020, Alternative coulometric signal readout based on a solid-contact ion-selective electrode for detection of nitrate, Anal Chim Acta, 1129, 136, 10.1016/j.aca.2020.07.019
Rashed, 2021, MWCNT-Doped Polypyrrole-Carbon Black Modified Glassy Carbon Electrode for Efficient Electrochemical Sensing of Nitrite Ions, Electrocatalysis, 12, 650, 10.1007/s12678-021-00675-6
Yin, 2021, Translating potentiometric detection into non-enzymatic amperometric measurement of H2O2, Talanta, 232, 10.1016/j.talanta.2021.122489
Zdrachek, 2019, Potentiometric Sensing, Anal Chem, 91, 2, 10.1021/acs.analchem.8b04681
Parrilla, 2019, Wearable potentiometric ion sensors, TrAC Trends Anal Chem, 110, 303, 10.1016/j.trac.2018.11.024
Islam, 2019, Prospects of pulsed amperometric detection in flow-based analytical systems-A Review, Anal Chim Acta, 1052, 10, 10.1016/j.aca.2018.10.066
Peshkova, 2008, Obtaining nernstian response of a Ca2+-selective electrode in a broad concentration range by tuned galvanostatic polarization, Anal Chem, 80, 9181, 10.1021/ac8013143
Lisak, 2011, Tuned galvanostatic polarization of solid-state lead-selective electrodes for lowering of the detection limit, Anal Chim Acta, 707, 1, 10.1016/j.aca.2011.09.026
Peshkova, 2015, Improvement of the upper limit of the ISE Nernstian response by tuned galvanostatic polarization, Electrochim Acta, 167, 187, 10.1016/j.electacta.2015.03.139
Szigeti, 2006, Approaches to Improving the Lower Detection Limit of Polymeric Membrane Ion-Selective Electrodes, Electroanalysis, 18, 1254, 10.1002/elan.200603539
Bergveld, 1970, Development of an Ion-Sensitive Solid-State Device for Neurophysiological Measurements, IEEE Trans Bio-Med Eng, 10.1109/TBME.1970.4502688
Moss, 1975, Potassium Ion-Sensitive Field Effect Transistor, Anal Chem, 47, 2238, 10.1021/ac60363a005
Joo, 2008, Chemical Sensors with Integrated Electronics, Chem Rev, 108, 638, 10.1021/cr068113+
Düzgün, 2011, Nanostructured Materials in Potentiometry, Anal Bioanal Chem, 399, 171, 10.1007/s00216-010-3974-3
Aragay, 2012, Nanomaterials Application in Electrochemical Detection of Heavy Metals, Electrochim Acta, 84, 49, 10.1016/j.electacta.2012.04.044
Cremer, 1906, Über die Ursache der elektromotorischen Eigenschaften der Gewebe zugleich ein Beitrag zur Lehre von den polyphasischen Elektrolytketten, R Oldenbourg (Z Biol), 47, 562
Haber, 1909, Über elektrische phasengrenzkräfte, Z Phys Chem, 67, 385, 10.1515/zpch-1909-6720
Tendeloo, 1936, A New and Easy Method for the Potentiometric Determination of Calcium Concentrations in Solutions, J Biol Chem, 113, 333, 10.1016/S0021-9258(18)74919-3
Ross, 1967, Calcium-Selective Electrode with Liquid Ion Exchanger, Science, 156, 1378, 10.1126/science.156.3780.1378
Frant, 1966, Electrode for Sensing Fluoride Ion Activity in Solution, Science, 154, 1553, 10.1126/science.154.3756.1553
Frant, 1968, Jr Use of a Total Ionic Strength Adjustment Buffer for Electrode Determination of Fluoride in Water Supplies, Anal Chem, 40, 1169, 10.1021/ac60263a005
Moore, 1970, Ionized calcium in normal serum, ultrafiltrates, and whole blood determined by ion-exchange electrodes, J Clin Invest, 49, 318, 10.1172/JCI106241
Li, 1971, Determination of serum ionic calcium with an ion-selective electrode: evaluation of methodology and normal values, Clin Chem, 17, 411, 10.1093/clinchem/17.5.411
Eisenman, 1957, Glass Electrode for Measuring Sodium Ion, Science, 126, 831, 10.1126/science.126.3278.831
Pioda, 1969, Highly Selective Potassium Ion Responsive Liquid-Membrane Electrode, Anal Lett, 2, 665, 10.1080/00032716908051343
Frant, 1970, Potassium Ion Specific Electrode with High Selectivity for Potassium over Sodium, Science, 167, 987, 10.1126/science.167.3920.987
Simon, 1975, Recent developments in the field of ion selective electrodes, Pure Appl Chem, 44, 613, 10.1351/pac197544030613
Kimura, 1987, Lithium ion selective electrodes based on crown ethers for serum lithium assay, Anal Chem, 59, 2331, 10.1021/ac00146a004
Ramanjaneyulu, 2017, Development of New Cs+ Ion-Selective Electrode with Alkyl-Bridged Calix[4]arene Crown-6 Compounds for the Determination of Cs+ in Nuclear Waste Streams, Chem Select, 2, 10347
Jahanian, 2017, A New PVC Matrix Membrane Sensor for Determination of Praseodymium(III) Ion based on Bis(salicylaldehyde) Thiocarbohydrazone as An Ion Carrier, Russ J Electrochem, 53, 435, 10.1134/S1023193517050068
Hassan, 1980, Divalent (water hardness) ion-selective electrodes based on poly(vinyl chloride) and poly(methyl acrylate) matrix membranes, Analyst, 105, 147, 10.1039/an9800500147
Levin, 2018, Water Hardness Electrodes with Ionophores Containing Oxy-and Ester-Groups, Russ J Electrochem, 54, 391, 10.1134/S1023193518040055
Timofeev, 2018, Solid-Contact Ion-Selective Electrodes with Copper Hexacyanoferrate in the Transducer Layer, Russ J Electrochem, 54, 400, 10.1134/S1023193518040080
Bratov, 2010, Recent trends in potentiometric sensor arrays—A review, Anal Chim Acta, 678, 149, 10.1016/j.aca.2010.08.035
Cruz, 2018, Determination of Paralytic Shellfish Toxins Using Potentiometric Electronic Tongue, Sens Actuators B, 263, 550, 10.1016/j.snb.2018.02.158
Rudnitskaya, 2017, Calibration Update Strategies for an Array of Potentiometric Chemical Sensors, Sens Actuators B, 238, 1181, 10.1016/j.snb.2016.06.075
Radu, 2013, Ion Selective Electrodes in Environmental Analysis, J Serb Chem Soc, 78, 1729, 10.2298/JSC130829098R
Yu, 2015, Solid-Contact Polymeric Membrane Electrode for Real-Time Monitoring of Lead Adsorption, Int J Electrochem Sci, 10, 5994, 10.1016/S1452-3981(23)17311-1
Fan, 2017, Determination of copper (II) ion in food using an ionic liquids-carbon nanotubes-based ion-selective electrode, J Food Comp Anal, 62, 63, 10.1016/j.jfca.2017.05.003
Erdoğan, 2017, Fractionation and Speciation of Cu in Different Processing Apricots, J Nutr Food Sci, 7, 1000643
Sunkesula, 2021, Effect of pH on the heat stability of reconstituted reduced calcium milk protein concentrate dispersions, J Dairy Sci, 104, 134, 10.3168/jds.2020-18937
Strelkova, 2017, A potentiometric sensor for determining E133 dye in beverages, J Anal Chem, 72, 777, 10.1134/S1061934817070139
Abdel-Ghany, 2017, Novel potentiometric sensors for the determination of the dinotefuran insecticide residue levels in cucumber and soil samples, Talanta, 164, 518, 10.1016/j.talanta.2016.12.019
Bakker, 2001, Potentiometry at trace levels, Trends Anal Chem, 20, 11, 10.1016/S0167-2940(01)90073-1
Bakker, 2005, Potentiometric sensors for trace-level analysis, Trends Anal Chem, 24, 199, 10.1016/j.trac.2005.01.003
Cuartero, 2017, Environmental Water Analysis with Membrane Electrodes, Curr Opin Electrochem, 3, 97, 10.1016/j.coelec.2017.06.010
Bakker, 2007, Modern Potentiometry, Angew Chem Int Ed, 46, 5660, 10.1002/anie.200605068
Koch, 2021, Preventing Pseudohyponatremia: Intralipid®-Based Lipemia Cutoffs for Sodium are Inappropriate, Clinica Chim Acta, 520, 63, 10.1016/j.cca.2021.05.032
Kalaria, 2021, The effect of haemolysis on the direct and indirect ion selective electrode measurement of sodium, Annals Clinical Biochem, 58, 190, 10.1177/0004563220987593
Anker, 1981, Neutral carrier based ion-selective electrode for the determination of total calcium in blood serum, Anal Chem, 53, 1970, 10.1021/ac00236a005
Hulanicki, 1990, Potentiometric method for the determination of calcium in blood serum, Anal Chim Acta, 233, 269, 10.1016/S0003-2670(00)83487-X
Vadstrup, 1991, Ionized calcium in blood: studies on patients with pulmonary disease, J Intern Med, 230, 239, 10.1111/j.1365-2796.1991.tb00437.x
Neves, 2018, Method comparison and validation of a prototype device for measurement of ionized calcium concentrations cow-side against a point-of-care instrument and a benchtop blood-gas analyzer reference method, J Dairy Sci, 101, 1334, 10.3168/jds.2017-13779
Suzuki, 2021, Validation of the bovine blood calcium checker as a rapid and simple measuring tool for the ionized calcium concentration in cattle, J Veterinary Med Sci, 83, 767, 10.1292/jvms.21-0001
Al-Ogaidi, 2017, A New Potentiometric Sensor the Assay of P53 in Blood Samples, Univ Politehn Bucharest Sci Bull B, 79, 113
Liu, 2019, Potentiometric Characterization of Telomerase Activity Using a Copper(ii)-pyrophosphate Complex with a Copper ion-selective Electrode, Anal Lett, 52, 353, 10.1080/00032719.2018.1463537
Kim, 2017, A Potentiometric Non-enzymatic Glucose Sensor using a Molecularly Imprinted Layer Bonded on a Conducting Polymer, Biosens Bioelectron, 91, 276, 10.1016/j.bios.2016.12.046
Khaled, 2017, Calixarene/Carbon Nanotubes based Screen Printed Sensors for Potentiometric Determination of Gentamicin Sulphate in Pharmaceutical Preparations and Spiked Surface Water Samples, Sens Actuators B, 244, 876, 10.1016/j.snb.2017.01.033
Smolinska-Kempisty, 2017, New Potentiometric Sensor based on Molecularly Imprinted Nanoparticles for Cocaine Detection, Biosens Bioelectron, 96, 49, 10.1016/j.bios.2017.04.034
Khaled, 2017, Crown Ether/Carbon Nanotubes Based Biperiden Disposable Potentiometric Sensor, Electroanalysis, 29, 975, 10.1002/elan.201600635
Gallardo-González, 2017, Sensitive Potentiometric Determination of Amphetamine with an All-Solid-state Micro Ion-Selective-electrode, Anal Lett, 51, 348, 10.1080/00032719.2017.1326053
Abdullad, 2021, Modified solid ion-selective electrode for potentiometric determination of sulfide in oil refineries water, Sci Rev Eng Env Sci, 30, 98
Totu, 2018, New Sensor Based on Membranes with Magnetic Nano-Inclusions for Early Diagnosis in Periodontal Disease, Biosens Bioelectron, 102, 336, 10.1016/j.bios.2017.11.003
Chen, 2021, Boronate ester bond–based potentiometric aptasensor for screening carcinoembryonic antigen-glycoprotein using nanometer-sized CaCO3 with ion-selective electrode, Anal Bioanal Chem, 413, 1073, 10.1007/s00216-020-03067-9
Qu, 2017, Public Health Concerns Arising from Interventions Designed to Circumvent Polluted Surface Drinking Water in Shenqiu County, Henan, China, The Lancet, 390, S87, 10.1016/S0140-6736(17)33225-7
Pei, 2017, Excessive Fluoride Stimulated Osteoclast Formation through Up-Regulation of Receptor Activator for Nuclear Factor-κB Ligand (RANKL) in C57BL/6 Mice, Int J Clin Exp Med, 10, 15260
Garoushi, 2018, Characterization of Fluoride Releasing Restorative Dental Materials, Dental Mater J, 37, 293, 10.4012/dmj.2017-161
Mendes, 2020, A sample preparation method for fluoride detection by potentiometry with ion-selective electrode in medicinal plants, J Fluorine Chem, 231, 10.1016/j.jfluchem.2020.109459
Salmerón-Valdés, 2021, Fluoride release and Recharge in Conventional Varnishes, compared to a Giomer and a Resin Modified Glass Ionomer, J Dent Mater Tech, 10, 62
Wang, 2017, Processing Technology and Quality of Low-Fluoride Brick Tea, Agric Sci Technol, 18, 1680
Patel, 2021, Acidity, fluoride and silver ion concentrations in silver diamine fluoride solutions: a pilot study, Australian Dental J, 66, 188, 10.1111/adj.12822
Mondal, 2021, Diagnosis of Fluorosis by Analysis of Fluoride Content in Body Fluids Using Ion Selective Electrode Method, Adv Experimental Med Biol, 1306, 121, 10.1007/978-3-030-63908-2_9
Meng, 2021, Effect of fluoride in drinking water on the level of 5-methylcytosine in human and rat blood, Environ Toxicol Pharmacol, 81, 10.1016/j.etap.2020.103511
Belugina, 2021, Developing non-invasive bladder cancer screening methodology through potentiometric multisensor urine analysis, Talanta, 234, 10.1016/j.talanta.2021.122696
Ichimura, 2021, A fully screen-printed potentiometric chloride ion sensor employing a hydrogel-based touchpad for simple and non-invasive daily electrolyte analysis, Anal Bioanal Chem, 413, 1883, 10.1007/s00216-021-03156-3
Tarasov, 2021, Flexible Potentiometric Sensor System for Non-Invasive Determination of Antioxidant Activity of Human Skin: Application for Evaluating the Effectiveness of Phytocosmetic Products, Chemosensors, 9, 76, 10.3390/chemosensors9040076
Rihawy, 2021, Application of electron probe micro analysis and ion selective electrode techniques to monitorthe efficiency of electrochemical Cl- extraction in cementitious materials, Int J Environ Anal Chem, 10.1080/03067319.2021.1897798
Colozza, 2021, Multiparametric analysis by paper-assisted potentiometric sensors for diagnostic and monitoring of reinforced concrete structures, Sens Actuators B, 345, 10.1016/j.snb.2021.130352
Han, 2017, Solid-state Ion Selective Lab Chip Sensor for On-site Measurement of Orthophosphate in Small Volumes of Liquid, J Coast Res, 79, 50, 10.2112/SI79-011.1
Zając, 2017, Multi-electrode system for measurement of transmembrane ion-fluxes through living epithelial cells, Bioelectrochemistry, 117, 65, 10.1016/j.bioelechem.2017.06.007
Dimeski, 2010, Ion Selective Electrodes (ISEs) and Interferences–a Review, Clin Chim Acta, 411, 309, 10.1016/j.cca.2009.12.005
Vaghela, 2018, A novel Inhibition Based Biosensor Using Urease Nanoconjugate Entrapped Biocomposite Membrane for Potentiometric Glyphosate Detection, Int J Biol Macromol, 108, 32, 10.1016/j.ijbiomac.2017.11.136
Jakhar, 2018, Preparation, Characterization and Application of Urease Nanoparticles for Construction of an Improved Potentiometric Urea Biosensor, Biosens Bioelectron, 100, 242, 10.1016/j.bios.2017.09.005
Guinovart, 2017, Characterization of a new ionophore-based ion-selective electrode for the potentiometric determination of creatinine in urine, Biosens Bioelectron, 87, 587, 10.1016/j.bios.2016.08.025
Moya, 2018, Miniaturized Multiparametric Flexible Platform for the Simultaneous Monitoring of Ionic: Application in Real Urine, Sens Actuators B, 255, 2861, 10.1016/j.snb.2017.09.104
Anastasova, 2018, Multi-parametric rigid and flexible, low-cost, disposable sensing platforms for biomedical applications, Biosens Bioelectron, 102, 668, 10.1016/j.bios.2017.10.038
Velázquez-Moyado, 2018, The detection and quantification, in vivo and in real time, of hydrogen sulfide in ethanol-induced lesions in rat stomachs using an ion sensitive electrode, J Pharmacol Toxicol Meth, 89, 54, 10.1016/j.vascn.2017.10.008
Sun, 2018, A potentiometric immunosensor for enterovirus 71 based on bis-MPA-COOH dendrimer-doped AgCl nanospheres with a silver ion-selective electrode, Analyst, 143, 487, 10.1039/C7AN01305A
Ding, 2009, Current-driven ion fluxes of polymeric membrane ion-selective electrode for potentiometric biosensing, J Am Chem Soc, 131, 14640, 10.1021/ja906723h
Juárez-Gómez, 2020, Construction and optimization of a novel acetylcholine ion-selective electrode and its application for trace level determination of propoxur pesticide, J Electrochem Soc, 167, 10.1149/1945-7111/ab8874
Nadim, 2021, Optimization of polydopamine imprinted polymer for label free sensitive potentiometric determination of proteins: Application to recombinant human erythropoietin sensing in different matrices, Microchem J, 167, 10.1016/j.microc.2021.106333
Nadim, 2021, Facile imprinted polymer for label-free highly selective potentiometric sensing of proteins: case of recombinant human erythropoietin, Anal Bioanal Chem, 413, 3611, 10.1007/s00216-021-03325-4
Zhao, 2019, Fine-scale in-situ measurement of lead ions in coastal sediment pore water based on an all-solid-state potentiometric microsensor, Anal Chim Acta, 1073, 39, 10.1016/j.aca.2019.04.059
Szymanek, 2020, A study on the mechanism of Ca2+ adsorption on TiO2 and Fe2O3 with the usage of calcium ion-selective electrode, Chemosphere, 242, 10.1016/j.chemosphere.2019.125162
Zhang, 2018, A Composable Module-Type Cyanide Microfluidic Sensor Based on Polydimethylsiloxane Membrane Pervaporative Sampling with Sodium Bicarbonate Internal-Pressure Regulation and Dual Fluorescence/Potentiometric Monitoring, Sens Actuators B, 259, 926, 10.1016/j.snb.2017.12.143
Smettem, 2017, New Potentiometric Wireless Chloride Sensors Provide High Resolution Information on Chemical Transport Processes in Streams, Water, 9, 542, 10.3390/w9070542
Church, 2018, Development and Characterization of Needle-Type Ion-Selective Microsensors for in situ Determination of Foliar Uptake of Zn2+ in Citrus Plants, Electroanalysis, 30, 626, 10.1002/elan.201700697
Li, 2017, Determining the Fluxes of Ions (Pb2+, Cu2+ and Cd2+) at the Root Surface of Wetland Plants Using the Scanning Ion-Selective Electrode Technique, Plant Soil, 414, 1, 10.1007/s11104-016-3109-5
Viltres-Portales, 2017, Estudio preliminar en la miniaturización de electrodos selectivos a iones Pb(II) basados en derivados de tiourea, Revista Cubana de Química, 29, 379
Nishiyama, 2017, Cesium ion-selective membrane fabricated in a glass nanopipette, Res Rep Kogakuin Univ, 123, 59
Ciosek, 2008, Miniaturized electronic tongue with an integrated reference microelectrode for the recognition of milk samples, Talanta, 76, 548, 10.1016/j.talanta.2008.03.051
Guzinski, 2017, PEDOT(PSS) as Solid Contact for Ion-Selective Electrodes: The Influence of the PEDOT(PSS) Film Thickness on the Equilibration Times, Anal Chem, 89, 3508, 10.1021/acs.analchem.6b04625
Soda, 2020, Emulsion Doping of Ionophores and Ion-Exchangers into Ion-Selective Electrode Membranes, Anal Chem, 92, 14319, 10.1021/acs.analchem.0c02920
Shibaev, 2020, Potentiometric sensor for chromium (VI) determination, J Phys Conference Series, 1611, 10.1088/1742-6596/1611/1/012031
Fiedler, 1973, Selectrode—the universal ion-selective electrode: Part VII. A valinomycin-based potassium electrode with nonporous polymer membrane and solid-state inner reference system, Anal Chim Acta, 67, 179, 10.1016/S0003-2670(01)80244-0
Schmidt, 1974, Structural study on the sodium salt of the ionophore, X-537A (lasalocid), by x-ray and nuclear magnetic resonance analysis, J Am Chem Soc, 96, 6189, 10.1021/ja00826a043
Kimura, 1983, A highly selective ionophore for potassium ions: a lipophilic bis (15-crown-5) derivative, J Chem Soc, Chem Commun, 9, 492, 10.1039/c39830000492
Lindner, 1990, Novel bis (crown ether)-based potassium sensor for biological applications, Microchim Acta, 100, 157, 10.1007/BF01244839
Casnati, 1996, 1,3-Alternate Calix[4]arenecrown-5 Conformers: New Synthetic Ionophores with Better K+/Na+ Selectivity than Valinomycin, Chem Eur J, 2, 436, 10.1002/chem.19960020413
Suzuki, 1996, Design and synthesis of sodium ion-selective ionophores based on 16-crown-5 derivatives for an ion-selective electrode, Anal Chem, 68, 208, 10.1021/ac950773j
Ammann, 1972, A calcium ion-selective electrode based on a neutral carrier, Anal Lett, 5, 843, 10.1080/00032717208069566
Ammann, 1975, Preparation of neutral ionophores for alkali and alkaline earth metal cations and their application in ion selective membrane electrodes, Helv Chim Acta, 58, 1535, 10.1002/hlca.19750580605
Ammann, 1975, Improved calcium ion-selective electrode based on a neutral carrier, Anal Lett, 8, 709, 10.1080/00032717508059042
Pretsch, 1980, Ionophore vom Typ der 3-Oxapentandiamide, Helv Chim Acta, 63, 191, 10.1002/hlca.19800630117
Schefer, 1986, Neutral carrier based Ca2+-selective electrode with detection limit in the sub-nanomolar range, Anal Chem, 58, 2282, 10.1021/ac00124a036
Gehrig, 1989, Very Lipophilic Ca2+-Selective Ionophore for chemical sensors of high lifetime, Chimia, 43, 377
Ceresa, 1999, Determination of formal complex formation constants of various Pb2+ ionophores in the sensor membrane phase, Anal Chim Acta, 395, 41, 10.1016/S0003-2670(99)00311-6
Abd-Rabboh, 20208493, All-Solid-State Calcium Sensors Modified with Polypyrrol (PPY) and Graphene Oxide (GO) as Solid-Contact Ion-to-Electron Transducers, Chemosensors
Dinten, 1991, Lifetime of neutral-carrier-based liquid membranes in aqueous samples and blood and the lipophilicity of membrane components, Anal Chem, 63, 596, 10.1021/ac00006a009
Kumar, 2004, PVC based dibenzo-18-crown-6 electrode for Ca(II) ions, Sens Actuat B, 99, 340, 10.1016/j.snb.2003.11.033
Shamsipur, 2001, The synthesis of 1,4-diaza-2,3;8,9-dibenzo-7,10-dioxacyclododecane-5,12-dione and its use in calcium-selective carbon paste electrodes, J Incl Phenom Macro Chem, 40, 303, 10.1023/A:1012737214492
Jain, 2008, Calcium(II)-selective potentiometric sensor based on p-isopropylcalix[6]arene in PVC matrix, Int J Environ Anal Chem, 88, 209, 10.1080/03067310701597269
Zamani, 2006, A highly selective and sensitive calcium(II)-selective PVC membrane based on dimethyl 1-(4-nitrobenzoyl)-8-oxo-2, 8-dihydro-1H-pyrazolo [5,1-a] isoindole-2, 3-dicarboxylate as a novel ionophore, Bull Korean Chem Soc, 27, 835, 10.5012/bkcs.2006.27.6.835
Singh, 2007, Calcium(II)-selective potentiometric sensor based on α-furildioxime as neutral carrier, Sens Actuat B, 123, 429, 10.1016/j.snb.2006.09.016
Ganjali, 2005, Novel calcium sensor based on [2-(2-hydroxyphenyl) imino]-1, 2-diphenylethanone, Acta Chim Slov, 52, 309
Calvo, 2006, EIS study of potentiometric membranes selective to Ca2+ employing the new ionophoric antibiotic tetronasin, Electrochim Acta, 51, 1569, 10.1016/j.electacta.2005.02.114
Gupta, 2011, Electrochemical Analysis of Some Toxic Metals by Ion-Selective Electrodes, Critical Rev Anal Chem, 41, 282, 10.1080/10408347.2011.589773
Huang, 2008, Macrocyclic Compound as Ionophores in Lead(II) Ion-Selective Electrodes with Excellent Response Characteristics, Chin Sci Bull, 53, 3255, 10.1007/s11434-008-0449-4
Huang, 2008, Nitrogen-Bearing Organic Compounds as Carriers for Lead Ion-Selective Electrodes with Excellent Response, Chin J Anal Chem, 36, 1735, 10.1016/S1872-2040(09)60011-6
Kulesza, 2011, Calixthioamides as Ionophores for Transition- and Heavy-Metal Cations, Eur J Inorg Chem, 2011, 777, 10.1002/ejic.201000663
Guzinski, 2013, Lead(II)-Selective Ionophores for Ion-Selective Electrodes: A Review, Anal Chim Acta, 791, 1, 10.1016/j.aca.2013.04.044
Kamel, 2017, Response characteristics of lead-selective membrane sensors based on newly synthesized quinoxaline derivatives as neutral carrier ionophores, Ionics, 23, 3497, 10.1007/s11581-017-2141-7
Hyalij, 2017, Development of Electrochemical Sensor for Determination of Lead (II) Ion, Int J Chem Studies, 5, 745
Mathew, 2014, A lead (II) selective PVC membrane potentiometric sensor based on a tetraazamacrocyclic ligand, J Incl Phenom Macro Chem, 78, 171, 10.1007/s10847-013-0285-2
Kumar, 2014, N’, N’’, N’’’-tris(2-pyridyloxymethyl) ethane as ionophore in potentiometric sensor for Pb(II) ions, J Chem Sci, 126, 33, 10.1007/s12039-013-0546-z
Abraham, 2015, A Novel Potentiometric Sensor Based on 1,2-Bis(N’-Benzoylthioureido)Benzene and Reduced Graphene Oxide for Determination of Lead (II) Cation in Raw Milk, Electrochim Acta, 165, 221, 10.1016/j.electacta.2015.03.003
Ali, 2016, Manufacture of Lead-Specific Screen-Printed Sensor Based on Lead Schiff Base Complex as Carrier and Multi-Walled Carbon Nanotubes for Detection of Pb(II) in Contaminated Water Tests, Int J Electrochem Sci, 11, 10732, 10.20964/2016.12.30
Guziński, 2013, Solid-Contact Ion-Selective Electrodes with Highly Selective Thioamide Derivatives of p-tert-Butylcalix[4]arene for the Determination of Lead(II) in Environmental Samples, Anal Chem, 85, 1555, 10.1021/ac302772v
Kamal, 2015, Selective and Sensitive Lead(II) Solid-Contact Potentiometric Sensor Based on Naphthalene-Sulfonamide Derivative, Int J Environ Sci Technol, 12, 2567, 10.1007/s13762-014-0621-0
Singh, 2013, Comparative Study of Lead(II) Selective Poly(vinyl chloride) Membrane Electrodes Based on Podand Derivatives as Ionophores, Electroanalysis, 25, 475, 10.1002/elan.201200404
Huang, 2013, Lead-Ion Potentiometric Sensor based on Electrically Conducting Microparticles of Sulfonic Phenylenediamine Copolymer, Analyst, 138, 3820, 10.1039/c3an00346a
Huang, 2014, Combinatorial Screening of Potentiometric Pb(II) Sensors from Polysulfoaminoanthraquinone Solid Ionophore, ACS Comb Sci, 16, 128, 10.1021/co400140g
Li, 2009, Lead(II) Ion-Selective Electrode Based on Polyaminoanthraquinone Particles with Intrinsic Conductivity, Talanta, 78, 498, 10.1016/j.talanta.2008.11.045
Huang, 2011, Lead Ion-Selective Electrodes Based on Polyphenylenediamine as Unique Solid Ionophores, Talanta, 85, 1575, 10.1016/j.talanta.2011.06.049
Huang, 2014, Synthesis of Semiconducting Polymer Microparticles as Solid Ionophore with Abundant Complexing Sites for Long-Life Pb(II) Sensors, ACS Appl Mater Interfaces, 6, 22096, 10.1021/am505463f
Li, 2012, Ultrasensitive Pb(II) Potentiometric Sensor Based on Copolyaniline Nanoparticles in a Plasticizer-Free Membrane with a Long Lifetime, Anal Chem, 84, 134, 10.1021/ac2028886
Khan, 2003, Synthesis, characterization and analytical applications of a new and novel ‘organic–inorganic’ composite material as a cation exchanger and Cd(II) ion-selective membrane electrode: polyaniline Sn(IV) tungstoarsenate, React Funct Polym, 55, 277, 10.1016/S1381-5148(03)00018-X
Khan, 2005, Determination and separation of Pb2+, from aqueous solutions using a fibrous type organic–inorganic hybrid cation-exchange material: Polypyrrole thorium(IV) phosphate, React Funct Polym, 63, 119, 10.1016/j.reactfunctpolym.2005.02.001
Khan, 2016, Synthesis, characterization, and electroanalytical studies of Pb2+-selective polypyrrole-Zr(IV) phosphate ion exchange membrane, J Solid State Electrochem, 20, 2079, 10.1007/s10008-016-3173-z
Bushra, 2014, Optimization of polyaniline supported Ti (IV) arsenophosphate composite cation exchanger based ion-selective membrane electrode for the determination of lead, Ind Eng Chem Res, 53, 19387, 10.1021/ie5034655
Inamuddin, 2015, Synthesis and characterisation of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) Zr(IV) monothiophosphate composite cation exchanger: analytical application as lead ion selective membrane electrode, Int J Environ Anal Chem, 95, 312, 10.1080/03067319.2015.1016016
Pathania, 2018, Zirconium (IV) phosphate/poly(gelatin-cl-alginate) Nanocomposite as Ion Exchanger and Al3+ potentiometric Sensor, Int J Electrochem Sci, 13, 994, 10.20964/2018.01.80
Fakhari, 1997, PVC-based hexathia-18-crown-6-tetraone sensor for mercury (II) ions, Anal Chem, 69, 3693, 10.1021/ac970133b
Lai, 1986, Mercury(II) and silver(I) ion-selective electrodes based on dithia crown ethers, Analyst, 111, 891, 10.1039/an9861100891
De Marco, 2000, Continuous flow analysis of mercury using a chalcogenide glass ion-selective electrode, Lab Rob Autom, 12, 194, 10.1002/1098-2728(2000)12:4<194::AID-LRA4>3.0.CO;2-O
Zhang, 2010, Synthesis and characterization of monoazathiacrown ethers as ionophores for polymeric membrane silver-selective electrodes, Talanta, 81, 1056, 10.1016/j.talanta.2010.01.060
Demirel, 2006, Akkus G¸ Yılmaz M, Kilic E, Silver(I)-Selective PVC Membrane Potentiometric Sensor Based on a Recently Synthesized Calix[4]arene, Electroanalysis, 18, 1019, 10.1002/elan.200503494
Isildak, 2020, Silver(I)-selective PVC membrane potentiometric sensor based on 5,10,15,20-tetra(4-pyridyl)-21H, 23H-porphine and potentiometric applications, J Chem Sci (Berlin), 132, 29, 10.1007/s12039-019-1734-2
Li, 2017, A chalcohalide glass/alloy based Ag+ ion-selective electrode with nanomolar detection limit, Sci Rep, 7, 16752, 10.1038/s41598-017-17032-7
Morakot, 2008, Synthesis of novel calix[4]arenes having benzothiazolylacetamidoalkoxy pendants and their potential application as Ag+-selective electrodes, Bull Korean Chem Soc, 29, 221, 10.5012/bkcs.2008.29.1.221
Teixidor, 1994, Simple Sensor Molecules for Detection of Silver(i) based on Monothioethers, J Chem Soc Chem Commun, 963, 10.1039/C39940000963
Bakker, 1999, Polymer membrane ion-selective electrodes–what are the limits?, Electroanalysis, 11, 915, 10.1002/(SICI)1521-4109(199909)11:13<915::AID-ELAN915>3.0.CO;2-J
Kaur, 2021, MWCNTs/SnZrMoP nano-composite as Ba(II)-selective electrode and heterogeneous catalyst for esterification of primary alcohols, Chem Papers, 75, 2379, 10.1007/s11696-020-01427-4
Faridbod, 2017, Cu2+-Selective Sensors Based on a New Ion-Carrier and Their Application for the Analysis of Copper Content of Water Samples, Int J Electrochem Sci, 12, 876, 10.20964/2017.02.11
Wang, 2019, Phytic acid@Ag-based all-solid-state ion selective electrode for potentiometric detection of Cu2+, J Electroanal Chem, 835, 137, 10.1016/j.jelechem.2019.01.031
Topcu, 2018, Electrochemical Determination of Copper(II) in Water Samples Using a Novel Ion-Selective Electrode Based on a Graphite Oxide-Imprinted Polymer Composite, Anal Lett, 51, 1890, 10.1080/00032719.2017.1395035
Kumar, 2017, Improved Performance of Schiff Based Ionophore Modified with MWCNT for Fe(II) Sensing by Potentiometry and Voltammetry Supported with DFT Studies, RSC Adv, 7, 16474, 10.1039/C7RA00393E
Kazemi, 2017, Application of 1,4-Diaminoanthraquinone as a New Selectophore Material for Construction of a Potentiometric Iron(III)-Selective Electrode, Bulgarian Chem Commun, 49, 449
De Marco, 1999, Continuous flow analysis of iron (III) in seawater using a chalcogenide glass ion-selective electrode, Lab Rob Autom, 11, 284, 10.1002/(SICI)1098-2728(1999)11:5<284::AID-LRA7>3.0.CO;2-8
Paut, 2021, Potentiometric response of solid-state sensors based on ferric phosphate for iron(III) determination, Sensors, 21, 1612, 10.3390/s21051612
Haputhanthri, 2021, A Novel Potentiometric Ion Selective Electrode Based on Piperine for the Determination of Fe (III) Ions, J Anal Chem, 76, 129, 10.1134/S1061934821010032
Khalil, 2021, Construction of a Highly Selective Membrane Sensor for the Determination of Cobalt (II) Ions, Chemosensors, 9, 86, 10.3390/chemosensors9050086
Ying, 2019, Complexation study of bis-thiourea compound with aluminium ion as ionophore for development of potentiometric ion sensor, Sains Malaysiana, 48, 2649
Aglan, 2021, Novel coated wire potentiometric sensor for selective determination of Mn(II) ions in various authentic samples, J Iran Chem Soc, 18, 1567, 10.1007/s13738-020-02135-2
Zayed, 2020, Development and surface characterization of a bis(aminotriazoles) derivative based renewable carbon paste electrode for selective potentiometric determination of Cr(III) ion in real water samples, Microchem J, 159, 10.1016/j.microc.2020.105478
Kim, 2020, Beryllium-Ion-Selective PEDOT Solid Contact Electrode Based on 9,10-Dinitrobenzo-9-Crown-3-Ether, Sensors, 20, 6375, 10.3390/s20216375
Frag, 2017, Electrochemical Characterization of Vanadium(V) Sensors Modified with 2,4-Dinitrophenyl Hydrazine. Studying the Reaction Mechanism Using SEM and IR, J Electroanal Chem, 784, 124, 10.1016/j.jelechem.2016.11.056
Husain, 2021, Study of the effect of ionophore carbon chain length on the selectivity of the Nd(III) ion selective electrode, J Phys Conf Series, 1763, 10.1088/1742-6596/1763/1/012083
Akl, 2017, Electrochemical Selective Determination of Uranyl Ions Using PVC Membrane Sensor, Electroanalysis, 29, 1459, 10.1002/elan.201700007
Ghanbari, 2017, A Uranyl Solid state PVC Membrane Potentiometric Sensor based on 4,13-Didecyl-1,7,10,16-tetraoxa-4,13-diazacyclooctadecane and Its Application for Environmental Samples, Int J Environ Anal Chem, 97, 189, 10.1080/03067319.2017.1279612
Sun, 2016, Screening highly selective ionophores for heavy metal ion-selective electrodes and potentiometric sensors, Electrochim Acta, 220, 690, 10.1016/j.electacta.2016.10.156
Ashina, 2021, A Novel Multi-Ionophore Approach for Potentiometric Analysis of Lanthanide Mixtures, Chemosensors, 9, 23, 10.3390/chemosensors9020023
Siwiec, 2019, The application of germanium (IV)-porphyrins as fluoride-selective ionophores for polymeric membrane electrodes, J Electroanal Chem, 833, 498, 10.1016/j.jelechem.2018.12.024
Bala, 2015, Further studies on application of Al(III)-tetraazaporphine in membrane-based electrochemical sensors for determination of fluoride, Sens Actuators B, 207, 1004, 10.1016/j.snb.2014.10.024
Chen, 2012, Cyanide-selective electrode based on Zn(II) tetraphenylporphyrin as ionophore, Anal Chem, 84, 9192, 10.1021/ac301910c
Fukao, 2018, Construction of Nitrate-selective Electrodes and Monitoring of Nitrates in the Hydroponic Solutions, Anal Sci, 34, 1373, 10.2116/analsci.18P333
Ganjali, 2003, Highly selective PVC-membrane electrodes based on Co(II)-Salen for determination of nitrite ion, Anal Sci, 19, 1127, 10.2116/analsci.19.1127
Dabrowska, 2019, Breakthrough Application of a Cross-Linked Polystyrene Anion-Exchange Membrane for a Hydrogencarbonate Ion-Selective Electrode, Sensors, 19, 1268, 10.3390/s19061268
Matveichuk, 2018, Carbonate-Selective Electrodes Based on Higher Quaternary Ammonium Salts with Increased Steric Accessibility of the Exchange Site, J Anal Chem, 73, 719, 10.1134/S1061934818030097
Saber, 2017, Selective Potentiometric Method for Determination of Nitrile in Water Samples Using New PVC Membrane Sensors, Int J Electrochem Sci, 12, 6190, 10.20964/2017.07.22
Pankratova, 2018, Fluorinated tripodal receptors for potentiometric chloride detection in biological fluids, Biosens Bioelectron, 99, 70, 10.1016/j.bios.2017.07.001
Kou, 2019, Detection of bromide ions in water samples with a nanomolar detection limit using a potentiometric ion-selective electrode, Int J Electrochem Sci, 14, 1601, 10.20964/2019.02.02
Dabrowska, 2017, Direct Potentiometric Determination of Hydrogen Carbonate in Mineral Waters, Electroanalysis, 29, 140, 10.1002/elan.201600551
Topcu, 2018, Structural characterization of chitosan-smectite nanocomposite and its application in the development of a novel potentiometric monohydrogen phosphate-selective sensor, Mater Res Bull, 98, 288, 10.1016/j.materresbull.2017.09.068
Bralić, 2018, Preparation of Phosphate Ion-Selective Membrane Based on Silver Salts Mixed with PTFE or Carbon Nanotubes, Int J Electrochem Sci, 13, 1390, 10.20964/2018.02.49
Kaur, 2020, BGO/AlFu MOF core shell nano-composite based bromide ion-selective electrode, J Environ Chem Eng, 8, 10.1016/j.jece.2020.104375
Kormosh, 2012, New potentiometric sensor for the determination of iodine species, Mater Sci Eng: C, 32, 2286, 10.1016/j.msec.2012.06.016
Bahar, 2020, A novel borate ion selective electrode based on carbon nanotube-silver borate, Int J Electrochem Sci, 15, 899, 10.20964/2020.01.40
Özkütük, 2021, Phosphate Imprinted Polymer As An Efficient Modifier For The Design of Ion Selective Electrode, J Chem Technol Biotechnol, 96, 2604, 10.1002/jctb.6803
Wu, 2021, An All-Solid-State Phosphate Ion-Selective Electrode Using BiPO4 as a Sensitive Membrane, Int J Electrochem Sci, 16, 10.20964/2021.06.49
Matveichuk, 2018, New Selenite Selective Electrodes Based on Higher Quaternary Ammonium Salts, Anal Chem Lett, 8, 428, 10.1080/22297928.2018.1465471
Sanati, 2021, Development of a potentiometric sensor for dihydrogen arsenite ion determinationin environmental samples employing a simplex lattice mixture design, Int J Environ Anal Chem, 10.1080/03067319.2021.1925260
Ertürün, 2017, A Calix[4]arene Derivative-doped Perchlorate-selective Membrane Electrodes with/without Multi-walled Carbon Nanotubes, Ionics, 23, 917, 10.1007/s11581-016-1906-8
Rezk, 2018, Potentiometric ion-selective electrodes for determination of cyclopentolate hydrochloride and phenylephrine hydrochloride in their challenging ophthalmic formulation, J Solid State Electrochem, 22, 3351, 10.1007/s10008-018-4045-5
Boltia, 2019, Development and Greenness Evaluation of a Potentiometric Method for Lomefloxacin Hydrochloride Determination in Urine and Establishment of Cumulative Excretion Pattern, J Electrochem Soc, 166, B141, 10.1149/2.1371902jes
Saad, 2018, ISE-potentiometric sensor for the determination of zolmitriptan: applications in plasma, pharmaceutical formulation and in vitro release profile, New J Chem, 42, 15263, 10.1039/C8NJ03203C
Lenik, 2017, Fabrication of a Developed Potentiometric Ibuprofen Electrode Based on New Functionalized β-Cyclodextrins for Pharmaceuticals Determination, IEEE Sensors J, 17, 1215, 10.1109/JSEN.2016.2642298
Khaled, 2010, β-Cyclodextrin-based potentiometric sensors for flow-injection determination of acetylcholines, Int J Electrochem Sci, 5, 448, 10.1016/S1452-3981(23)15297-7
Mousavi, 2018, In Situ Sensing of the Neurotransmitter Acetylcholine in a Dynamic Range of 1 nM to 1 mM, ACS Sensors, 3, 2581, 10.1021/acssensors.8b00950
Elbalkiny, 2019, Potentiometric diclofenac detection in wastewater using functionalized nanoparticles, Microchem J, 145, 90, 10.1016/j.microc.2018.10.017
ElDin, 2021, Microfabricated potentiometric sensor for personalized methacholine challenge tests during the COVID-19 pandemic, Biosens Bioelectron, 190, 10.1016/j.bios.2021.113439
Elhassan, 2021, In-line monitoring of sitagliptin dissolution profile from tablets utilizing an eco-friendly potentiometric sensor, Chem Pap, 75, 4165, 10.1007/s11696-021-01646-3
Fayez, 2021, Stable Solid-State Microfabricated Potentiometric Sensor Based on Chitosan-Prussian Blue Nanocomposite Film for Amlodipine Selective Detection, J Electrochem Soc, 168, 10.1149/1945-7111/abf8d4
Bell, 2018, Electrochemical Sensing of Carbachol in Ophthalmic Solutions, J Electrochem Soc, 165, B835, 10.1149/2.0571816jes
El-Rahman, 2019, Inline potentiometric monitoring of Butyrylcholinesterase activity based on metabolism of bambuterol at the point of care, Sens Actuators B, 285, 216, 10.1016/j.snb.2019.01.055
Tantawy, 2021, All solid-state miniaturized potentiometric sensors for flunitrazepam determination in beverages, Microchim Acta, 188, 192, 10.1007/s00604-021-04851-9
Boltia, 2021, Optimized ion selective electrode for determination of Tamsulosin hydrochloride in the presence of co-formulated Deflazacort in bulk, tablet dosage form and human urine, Microchem J, 163, 10.1016/j.microc.2021.105936
He, 2021, A miniature potentiometric sensor for dopamine determination in vitro, Meas Sci Technol, 32, 10.1088/1361-6501/abbfed
Hassan, 2018, Potentiometric detection of low-levels of sulfamethazine in milk and pharmaceutical formulations using novel plastic membrane sensors, J Electrochem Sci Eng, 9, 17, 10.5599/jese.575
Bagheri, 2018, Design and Fabrication of PVC Membrane Electrode Based on Netural Ligand (E)-N'-(1-(2-Hydroxyphenyl)Ethylidene)Benzohydrazi for Teramadol hydrochloride Measurement in Drugs and Biological Fluids, Anal Bioanal Chem Res, 5, 285
Idress, 2017, Potentiometric determination of moxifloxacin by ZnO nanorods modified ion selective electrode, Pharm Anal Acta, 8, 566
Elghobashy, 2014, Comparative study of different ionophores in ion selective electrodes for stability indicating determination of moxifloxacin, Anal Bioanal Electrochem, 6, 461
Moamed, 2015, Comparative Study of Different Modified Potentiometric Sensors for Determination of Moxifloxacin HCl in Dosage Forms, Pharm Anal Acta, 6, 397, 10.4172/2153-2435.1000397
Gadhari, 2021, Enantioselective high performance new solid contact ion-selective electrode potentiometric sensor based on sulphated γ-cyclodextrin carbon nanofiber composite for determination of multichiral drug moxifloxacin, J Electroanal Chem, 882, 10.1016/j.jelechem.2021.114981
Faridbod, 2017, Ionic Liquids Based Polymeric Membrane Drug Sensors, Current Anal Chem, 13, 52, 10.2174/1573411012666160601150123
Brennan, 2017, An Ionic Liquid-based Sensor for Diclofenac Determination in Water, Int J Environ Anal Chem, 97, 588, 10.1080/03067319.2017.1333607
Soleymanpour, 2017, Liquid Membrane/Polyaniline Film Coated Glassy Carbon Sensor for Highly Sensitive and Selective Determination of Fluvoxamine in Pharmaceutical and Biological Samples, Sens Actuators B, 247, 602, 10.1016/j.snb.2017.03.087
Faridbod, 2013, Determination of Ondansetron Hydrochloride by a Liquid Membrane Potentiometric Sensor based on Room Temperature Ionic Liquids, Int J Electrochem Sci, 8, 10461, 10.1016/S1452-3981(23)13122-1
Hamza, 2017, A New Ion Selective Electrode Method for Determination of Oseltamivir Phosphate(Tamiflu) and Its Pharmaceutical Applications, Arabian J Chem, 10, S236, 10.1016/j.arabjc.2012.07.029
Shawish, 2017, Determination of Haloperidol Drug in Ampoules and in Urine Aamples Using a Potentiometric PVC-Membrane and Graphite Coated Wire Electrodes, Marmara Pharm J, 21, 110
Bouklouze, 2002, Potentiometric sensor for hydroxyzine determination, Electroanalysis, 14, 1369, 10.1002/1521-4109(200211)14:19/20<1369::AID-ELAN1369>3.0.CO;2-N
Khalil, 2017, Novel Potentiometric Sensors for Pyrilamine Maleate, J Iran Chem Soc, 1
Elzanfaly, 2017, Green in-line Ion Selective Electrode Potentiometric Method for Determination of Amantadine in Dissolution Media and in Pharmaceutical Formulations, ACS Sustain Chem Eng, 5, 4381, 10.1021/acssuschemeng.7b00421
Khalil, 2017, A New Approach for Decreasing the Detection Limit of Gentamicin Ion-selective Electrodes by Incorporation of Multiwall Carbon Nanotubes (MWCNTs)/Lipophilic Anionic Additives, Electroanalysis, 29, 566, 10.1002/elan.201600444
Abdel-Haleem, 2021, Polyvinyl Chloride Modified Carbon Paste Electrodes for Sensitive Determination of Levofloxacin Drug in Serum, Urine, and Pharmaceutical Formulations, Sensors, 21, 3150, 10.3390/s21093150
Bliem, 2017, Development and Optimization of an Ion-selective Electrode for Serotonin Detection, Electroanalysis, 29, 1635, 10.1002/elan.201600782
Khamees, 2017, All-Solid-State, PVC Membrane, and Carbon Paste Ion-Selective Electrodes for Determination of Donepezil Hydrochloride in Pharmaceutical Formulation, J AOAC Int, 100, 1414, 10.5740/jaoacint.16-0299
Yehia, 2017, An Umeclidinium membrane sensor; Two-step optimization strategy for improved responses, Talanta, 172, 61, 10.1016/j.talanta.2017.05.019
Rajendraprasad, 2019, Novel membrane sensor for determination of lamotrigine in pharmaceuticals and urine, Current Chem Lett, 8, 87, 10.5267/j.ccl.2019.2.002
Zubenia, 2018, Design of a Gramine-Selective Membrane Sensor, Anal Bioanal Electrochem, 10, 531
El-Kosasy, 2019, Graphene nanoplatelets in potentiometry: A nanocomposite carbon paste and PVC based membrane sensors for analysis of Vilazodone HCl in plasma and milk samples, Talanta, 193, 9, 10.1016/j.talanta.2018.09.091
Zareh, 2018, Plastic Sensor for Losartan Potassium Determination based on Ferroin and Ionic Liquid, Int J Electrochem Sci, 13, 1260, 10.20964/2018.02.59
Alturiqi, 2017, Construction and performance characterization of ion selective electrodes for potentiometric determination of Citapolarm hydrobromide in biological fluids, Oriental J Chem, 33, 324, 10.13005/ojc/330138
Elgendy, 2021, Novel potentiometric methods for the estimation of bisoprolol and alverine in pharmaceutical forms and human serum, Rev Anal Chem, 40, 127, 10.1515/revac-2021-0129
Mavritsakis, 2019, Actual study regarding quantitative determination of tetracyclines by electrical analysis techniques and methods, Rev Chim (Bucharest, Rom), 70, 671, 10.37358/RC.19.2.6982
Issa, 2017, A Disposable Homemade Screen Printed Electrochemical Sensor for Vitamin B1 Determination in Multivitamin Ampoules: Potentiometric and Surface Morphology Studies, Electroanalysis, 29, 1426, 10.1002/elan.201700034
Mazloum-Ardakani, 2018, Development of a Polymeric Membrane Electrode for Determination of Citrate Ions by Potentiometric Technique, Anal Bioanal Electrochem, 10, 1093
Kormosh, 2021, Potentiometric Sensor for Naproxen Determination, Pharm Chem J, 55, 97, 10.1007/s11094-021-02379-z
Mansour, 2018, Determination of clopidogrel bisulphate using drug selective membranes, Res J Pharmacy Technol, 11, 2017, 10.5958/0974-360X.2018.00374.8
El-Rahman, 2018, Development of Potentiometric Method for In Situ Testing of Terbinafine HCl Dissolution Behavior Using Liquid Inner Contact Ion-Selective Electrode Membrane, J Electrochem Soc, 165, B143, 10.1149/2.0091805jes
El-Hanboushy, 2019, Real Time Selective Monitoring of the Dissolution Behavior of Pseudoephedrine Sulfate and Loratadine in Their Binary and Ternary Dosage Form by Utilization of In-Line Potentiometric Sensor, J Electrochem Soc, 166, B610, 10.1149/2.0741908jes
Durka, 2019, Dopamine/2-Phenylethylamine Sensitivity of Ion-Selective Electrodes Based on Bifunctional-Symmetrical Boron Receptors, Sensors, 19, 283, 10.3390/s19020283
Saad, 2018, Novel Green Potentiometric Method for the Determination of Lidocaine Hydrochloride and its Metabolite 2,6-Dimethylaniline; Application to Pharmaceutical Dosage Form and Milk, Electroanalysis, 30, 1689, 10.1002/elan.201800132
Rizk, 2021, Fabrication and characterization of disposable stencil printed ion selective electrode with improved sensitivity for determination of antiallergic epinastine HCl in opthalmic solution, Measurement, 174, 10.1016/j.measurement.2021.109068
Bell, 2019, Paper-based potentiometric sensing of free bilirubin in blood serum, Biosens Bioelectron, 126, 115, 10.1016/j.bios.2018.10.055
Hussein, 2017, Application of Membrane-selective Electrodes for the Determination of Tiemonium Methylsulphate, Bull Faculty of Pharmacy, Cairo Univ, 55, 141, 10.1016/j.bfopcu.2016.11.001
Salama, 2018, Innovative transducers based on molecular imprinting for selective potentiometric determination of trazodone hydrochloride in pure and pharmaceutical preparations, Authors J, 19
Gao, 2018, Preparation and molecule-recognition characteristics of grafting type molecule-imprinted membrane and potentiometric sensor for atrazine, Sens Actuators B, 254, 1048, 10.1016/j.snb.2017.07.089
Zhang, 2018, Novel Potentiometric Sensor Based on Molecular Imprinted Polyacrylamide for the Determination of Shikimic Acid in Herbal Medicine, Anal Lett, 51, 2920, 10.1080/00032719.2018.1455203
Abdalla, 2019, All Solid-State Poly(Vinyl Chloride) Membrane Potentiometric Sensor Integrated with Nano-Beads Imprinted Polymers for Sensitive and Rapid Detection of Bispyribac Herbicide as Organic Pollutant, Molecules, 24, 712, 10.3390/molecules24040712
Kamel, 2019, Novel Solid-State Potentiometric Sensors Using Polyaniline (PANI) as A Solid-Contact Transducer for Flucarbazone Herbicide Assessment, Polymers, 11, 1796, 10.3390/polym11111796
Abd-Rabboh, 2021, All-Solid-State Potentiometric Ion-Sensors Based on Tailored Imprinted Polymers for Pholcodine Determination, Polymers, 13, 1192, 10.3390/polym13081192
Amr, 2021, Solid-Contact Potentiometric Sensors Based on Main-Tailored Bio-Mimics for Trace Detection of Harmine Hallucinogen in Urine Specimens, Molecules, 26(2):324
Liang, 2013, Molecularly imprinted nanoparticles based potentiometric sensor with a nanomolar detection limit, Sensors Actuat B, 188, 972, 10.1016/j.snb.2013.07.110
Hamidi, 2018, Novel Potentiometric Ni2+-Sensor based on a Ni2+ Ion-Imprinted Polymer, Anal Bioanal Electrochem, 10, 281
Alizadeh, 2015, Improvement of durability and analytical characteristics of arsenic-imprinted polymer-based PVC membrane electrode via surface modification of nano-sized imprinted polymer particles: Part 2, Electrochim Acta, 178, 877, 10.1016/j.electacta.2015.08.045
Ivari, 2017, Ion imprinted polymer based potentiometric sensor for the trace determination of Cadmium (II) ions, Arabian J Chem, 10, S864, 10.1016/j.arabjc.2012.12.021
Bomar, 2017, Nitrate Ion Selective Electrode Based on Ion Imprinted Poly(N-methylpyrrole), Chemosensors, 5, 2, 10.3390/chemosensors5010002
Hutchins, 1995, Nitrate-selective electrode developed by electrochemically mediated imprinting/doping of polypyrrole, Anal Chem, 67, 1654, 10.1021/ac00106a002
Zhang, 2020, An all-solid-state NO3- ion-selective electrode with gold nanoparticles solid contact layer and molecularly imprinted polymer membrane, PLoS ONE, 15, 10.1371/journal.pone.0240173
Kelani, 2021, Widening the applications of the Just-Dip-It approach: a solid contact screen-printed ion-selective electrode for the real-time assessment of pharmaceutical dissolution testing in comparison to off-line HPLC analysis, RSC Adv, 11, 13366, 10.1039/D1RA00040C
Sakač, 2017, A New Sensor for Determination of Anionic Surfactants in Detergent Products with Carbon Nanotubes as Solid Contact, J Surfact Deterg, 20, 881, 10.1007/s11743-017-1978-0
Samardžić, 2017, A Novel, Fast Responding, Low Noise Potentiometric Sensor Containing a Carbon-based Polymeric Membrane for Measuring Surfactants in Industrial and Environmental Applications, Talanta, 162, 316, 10.1016/j.talanta.2016.10.041
Samardzic, 2021, The novel anionic surfactant selective sensors based on newly synthesized quaternary ammonium salts as ionophores, Sens Actuators B, 343, 10.1016/j.snb.2021.130103
Mahajan, 2004, Cationic Surfactant-Selective Potentiometric Sensors based on Neutral Ion-Pair Carrier Complexes, J Surfactants Detergents, 7, 131, 10.1007/s11743-004-0295-9
Khan, 2017, Potentiometric Determination of Cationic Surfactant using ‘Polymeric-Inorganic’ Nanocomposite Sensor, Int J Res Chem Environ, 7, 9
Discharge Standard of Pollutants for Municipal Wastewater Treatment Plant GB18918-2002.
Standards for Irrigation Water Quality in China GB5084-92.
Health Standards for Drinking Water in China GB5749-2006.
Gilbert, 2006, A Rationale for Lowering the Blood Lead Action Level from 10 to 2 μg/dL, Neurotoxicology, 27, 693, 10.1016/j.neuro.2006.06.008
Bellinger, 2006, Childhood Lead Poisoning: The Torturous Path from Science to Policy, J Clin Invest, 116, 853, 10.1172/JCI28232
Li, 2017, Trend of Childhood Blood Lead Levels in Cities of China in Recent 10 Years, Environ Sci Pollut R, 24, 5824, 10.1007/s11356-016-8335-0
Bedlechowicz-Śliwakowska, 2006, Ion-Selective Electrode for Measuring Low Ca2+ Concentrations in the Presence of High K+, Na+ and Mg2+ Background, Anal Bioanal Chem, 385, 1477, 10.1007/s00216-006-0607-y
Hauser, 1995, A potassium-ion selective electrode with valinomycin based poly(vinyl chloride) membrane and a poly(vinyl ferrocene) solid contact, Anal Chim Acta, 302, 241, 10.1016/0003-2670(94)00472-X
Singh, 2005, A highly selective thallium(I) electrode based on a thia substituted macrocyclic ionophore, Talanta, 66, 993, 10.1016/j.talanta.2004.12.059
Chester, 2014, A calixarene-based ion-selective electrode for thallium (I) detection, Anal Chim Acta, 851, 78
Ahmadzadeh, 2015, Cesium selective polymeric membrane sensor based on p-isopropylcalix [6] arene and its application in environmental samples, RSC Adv, 5, 39209, 10.1039/C5RA02799C
Heydari, 2019, Rapid Measuring of Cu2+ ions by Selective Potentiometric Sensor based on a New Ion Carrier, Anal Bioanal Electrochem, 11, 278
Pouya, 2018, Application of 2-(benzyliminomethyl)-6-methoxy-4-(4-methoxyphenyl-azo) phenol in construction of ion-selective PVC membrane electrode for determination of copper (II) in mineral water sample, Appl Organomet Chem, 32, 10.1002/aoc.4040
Hasani, 2018, Ionophore properties of Schiff base compounds as ion sensing molecules for fabricating Cu(II) ion-selective electrodes, J Anal Chem, 73, 82, 10.1134/S1061934818010021
Kaur, 2019, Fabrication of Zn(II) Selective Polyvinyl Chloride Membrane Electrode based on N, N'-bis(1-hydroxynaphthalene-2-carbaldehyde)-o-phenylenediamine as an Ionophore: Experimental and Theoretical Approaches, J Anal Chem, 74, 134, 10.1134/S1061934819020084
Golcs, 2018, Fast Potentiometric Analysis of Lead in Aqueous Medium under Competitive Conditions Using an Acridono-Crown Ether Neutral Ionophore, Sensors, 18, 1407, 10.3390/s18051407
Ma, 2018, In situ monitoring of Pb2+ leaching from the galvanic joint surface in a prepared chlorinated drinking water, Environ Sci Technol, 52, 2126, 10.1021/acs.est.7b05526
Kaur, 2018, Fabrication of Pb(II) Selective Polymeric Membrane Electrode Based on 2,2’[Propane-1,3-Diylbis (Oxy)] Dibenzaldehyde as an Ionophore, J Anal Bioanal Technol, 9, 2
Sutter, 2004, A Polypyrrole-Based Solid-Contact Pb2+-Selective PVC-Membrane Electrode with a Nanomolar Detection Limit, Anal Bioanal Chem, 380, 7, 10.1007/s00216-004-2737-4
de Namor, 2018, Calix [4] based Hg (II) ion selective electrodes: A thermodynamic protocol to address the selectivity versus the hosting capacity paradigm in the selection of the carrier, Electrochim Acta, 290, 686, 10.1016/j.electacta.2018.09.101
Gupta, 2014, Cadmium (II) ion sensing through p-tert-butyl calix [6] arene based potentiometric sensor, J Mol Liq, 195, 65, 10.1016/j.molliq.2014.02.001
Shamsipur, 2009, Novel PVC-membrane potentiometric sensors based on a recently synthesized sulfur-containing macrocyclic diamide for Cd2+ ion. Application to flow-injection potentiometry, J Hazard Mater, 172, 566, 10.1016/j.jhazmat.2009.07.003
Jamil, 2019, Liquid polymeric membrane composition of ion selective electrode based on thiazole-4-carboxamide as ionophore, In AIP Conference Proceedings, 2068, 10.1063/1.5089363
Ion, 2001, Potentiometric Cd2+-selective electrode with a detection limit in the low ppt range, Anal Chim Acta, 440, 71, 10.1016/S0003-2670(01)01052-2
Kaur, 2018, New Acyclic Arylether Ionophores as Potentiometric Sensors for Ca (II) and Fe (II) Ions, MAPAN, 33, 43, 10.1007/s12647-017-0232-6
Saber, 2018, Iron-selective Poly(Vinyl Chloride) Membrane Electrode Based on Norfloxacin as a Neutral Carrier, Int J Electrochem Sci, 13, 10076, 10.20964/2018.11.32
Ahmadzadeh, 2015, Highly selective detection of titanium (III) in industrial waste water samples using meso-octamethylcalix [4] pyrrole-doped PVC membrane ion-selective electrode, Electrochim Acta, 178, 580, 10.1016/j.electacta.2015.07.014
Mahanty, 2018, Development of a potentiometric sensor for europium (III) based on N, N, N′, N′-tetraoctyldiglycolamide (TODGA) as the ionophore, J Electroanal Chem, 808, 340, 10.1016/j.jelechem.2017.11.072
Mahanty, 2018, Evaluation of a novel PVC-based efficient potentiometric sensor containing a tripodal diglycolamide (TREN-DGA) ionophore for europium (III) estimation, Sens Actuators B, 272, 534, 10.1016/j.snb.2018.05.159
Sanavi-Khoshnod, 2018, A New Highly Selective Neodymium (III) Polyvinylchloride Membrane Electrode Based on 4-Hydroxypyrrolidine-2-Carboxylic Acid as an Active Material, J Anal Chem, 73, 71, 10.1134/S1061934818010094
Mirzaee, 2019, Construction of a New Selective and Sensitive Nd3+ ion-selective Electrode Based on 1-nitroso-2-naphtol as a Neutral Ion Carrier, Int J Electrochem Sci, 14, 693, 10.20964/2019.01.04
Ardakanifard, 2018, Construction of a new Lu3+ poly(vinyl chloride) membrane sensor Based on 2,2'-[propane-1,3-diylbis(thio)]dianiline as a suitable sensing material, J Electrochem Sci, 13, 8365, 10.20964/2018.09.47
Kumar, 2019, Development of highly selective potentiometric thorium (iv) ion-selective electrode: exploration supported with optical and DFT analysis, Anal Methods, 11, 1338, 10.1039/C8AY02740D
Gupta, 2021, Trace level monitoring of Cu(II) ion using CuS particles based membrane electrochemical sensor, Heliyon, 7, 10.1016/j.heliyon.2021.e07167
Khan, 2018, Determination of Cu2+ in aqueous solution using a polyindole–tin (IV) molybdophosphate conductive nanocomposite ion-selective membrane electrode, J Phys Chem Solids, 123, 113, 10.1016/j.jpcs.2018.06.011
Khan, 2019, Synthesis and characterization of cation exchange membrane based on Polyaniline Bi(III)tungstophosphate nanocomposite: its application as Ni(II) selective electrode, Mater Res Express, 6
Hussain, 2019, Electrochemical sensing of Pb2+ ion in water by ion selective membrane electrode based on Polypyrrole titanium (IV) sulphosalicylo phosphate cation exchange nanocomposite, Groundwater Sustainable Dev, 8, 216, 10.1016/j.gsd.2018.09.002
Arfin, 2019, Rapid determination of lead ions using polyaniline-zirconium (IV) iodate-based ion selective electrode, J Environ Chem Eng, 7, 10.1016/j.jece.2018.102811
Li, 2021, Development and application of a novel lead ion-selective electrode with the alkylamines modified molecular sieve as carrier, J Iranian Chem Soc, 18, 2853, 10.1007/s13738-021-02260-6
Bushra, 2018, Fabrication of Polyaniline-Zr (IV) Molybdophosphate as a Nanocomposite and its Potential Applications, Nano Tech Appl, 1, 1, 10.33425/2639-9466.1008
Khan, 2017, Determination of Cd2+ in aqueous solution using polyindole–Ce (IV) vanadophosphate conductive nanocomposite ion-selective membrane electrode, Mater Res Express, 4, 10.1088/2053-1591/aa8920
Pathania, 2018, Fabrication of electrically conductive membrane electrode of gelatin-tin (IV) phosphate nanocomposite for the detection of cobalt (II) ions, Adv Powder Technol, 29, 915, 10.1016/j.apt.2018.01.009
Bloch, 1967, Fabrication and evaluation of membranes as specific electrodes for calcium ions, Biophys J, 7, 865, 10.1016/S0006-3495(67)86626-8
Moody, 1971, p12
Lindner, 1988, Responses of site-controlled, plasticized membrane electrodes, Anal Chem, 60, 295, 10.1021/ac00155a004
Garada, 2015, Extraction or adsorption? Voltammetric assessment of protamine transfer at ionophore-based polymeric membranes, Anal Chem, 87, 5348, 10.1021/acs.analchem.5b00644
Telting-Diaz, 2001, Effect of lipophilic ion-exchanger leaching on the detection limit of carrier-based ion-selective electrodes, Anal Chem, 73, 5582, 10.1021/ac010526h
Keplinger, 1998, Water Flux across Neutral Carrier Membranes, Anal Chem, 70, 4271, 10.1021/ac980389x
Huang, 2012, Improvement of Lower Detection Limit of Ion-Selective Electrodes Based on PVC Membrane, Prog Chem (in Chinese), 24, 1560
Sokalski, 1997, Large Improvement of the Lower Detection Limit of Ion-Selective Polymer Membrane Electrodes, J Am Chem Soc, 119, 11347, 10.1021/ja972932h
Nagy, 2016, Lowering Detection Limits Toward Target Ions Using Quasi-Symmetric Polymeric Ion-Selective Membranes Combined with Amperometric Measurements, Anal Chem, 88, 9850, 10.1021/acs.analchem.6b03043
Lindner, 1999, Tailored transport through ion-selective membranes for improved detection limits and selectivity coefficients, Electroanalysis, 11, 695, 10.1002/(SICI)1521-4109(199907)11:10/11<695::AID-ELAN695>3.0.CO;2-G
Konopka, 2006, The Influence of the Conditioning Procedure on Potentiometric Characteristics of Solid Contact Calcium-Selective Electrodes in Nanomolar Concentration Solutions, Electroanalysis, 18, 2232, 10.1002/elan.200603652
Huang, 2013, Ion Selective Electrodes Based on Sensing Membrane without or with Reduced Amounts of Plasticizer, Acta Phys-Chim Sin, 29, 1, 10.3866/PKU.WHXB201210081
Uhlig, 1997, Miniaturized ion-selective chip electrode for sensor application, Anal Chem, 69, 4032, 10.1021/ac960957d
Oh, 1996, One-component room temperature vulcanizing-type silicone rubber-based calcium-selective electrodes, Anal Chem, 68, 503, 10.1021/ac950789+
Yoon, 1999, Ion sensors using one-component room temperature vulcanized silicone rubber matrices, J Electroanal Chem, 464, 135, 10.1016/S0022-0728(99)00010-8
Tsujimura, 1995, Practical applicability of silicone rubber membrane sodium-selective electrode based on oligosiloxane-modified calix [4] arene neutral carrier, Anal Chem, 67, 2401, 10.1021/ac00110a012
Malinowska, 1996, Enhanced electrochemical performance of solid-state ion sensors based on silicone rubber membranes, Sens Actuators B, 33, 161, 10.1016/0925-4005(96)80091-8
Goldberg, 1994, Screen printing: a technology for the batch fabrication of integrated chemical-sensor arrays, Sens Actuators B, 21, 171, 10.1016/0925-4005(94)01249-0
Cosofret, 1996, Aliphatic polyurethane as a matrix for pH sensors: effects of native sites and added proton carrier on electrical and potentiometric properties, Talanta, 43, 143, 10.1016/0039-9140(95)01724-0
Yun, 1997, Potentiometric properties of ion-selective electrode membranes based on segmented polyether urethane matrices, Anal Chem, 69, 868, 10.1021/ac9605455
Cha, 1990, Polyimide-matrix chemical-selective membranes, Sensor Actuators B, 1, 281, 10.1016/0925-4005(90)80216-M
Wang, 2003, Development of a solid-state thick film calcium ion-selective electrode, Sens Actuators B, 96, 709, 10.1016/S0925-4005(03)00571-9
Heng, 1996, Methacrylate-acrylate based polymers of low plasticiser content for potassium ion-selective membranes, Anal Chim Acta, 324, 47, 10.1016/0003-2670(96)00019-0
Heng, 2000, Taking the Plasticizer out of Methacrylic-Acrylic Membranes for K+-Selective Electrodes, Electroanalysis, 12, 187, 10.1002/(SICI)1521-4109(200002)12:3<187::AID-ELAN187>3.0.CO;2-Z
Malinowska, 2000, Novel approach of immobilization of calix[4]arene type ionophore in ‘self-plasticized’polymeric membrane, Anal Chim Acta, 421, 93, 10.1016/S0003-2670(00)00999-5
Heng, 2000, Producing “self-plasticizing” ion-selective membranes, Anal Chem, 72, 42, 10.1021/ac9904765
Heng, 2001, Assessing a photocured self-plasticised acrylic membrane recipe for Na+ and K+ ion selective electrodes, Anal Chim Acta, 443, 25, 10.1016/S0003-2670(01)01195-3
Michalska, 2009, Poly(n-butyl acrylate) based lead (II) selective electrodes, Talanta, 79, 1247, 10.1016/j.talanta.2009.05.028
Lyczewska, 2010, Comparison of trihexadecylalkylammonium iodides as ion-exchangers for polyacrylate and poly(vinyl chloride) based iodide-selective electrodes, Sens Actuators B, 146, 283, 10.1016/j.snb.2010.02.016
Heng, 2004, Ion-transport and diffusion coefficients of non-plasticised methacrylic–acrylic ion-selective membranes, Talanta, 63, 73, 10.1016/j.talanta.2003.12.051
Michalska, 2009, Quantifying Primary Silver Ions Contents in Poly(vinyl chloride) and Poly(n-butyl acrylate) Ion-Selective Membranes, Electroanalysis, 21, 1931, 10.1002/elan.200804611
Heng, 2000, Methacrylic-Acrylic Polymers in Ion-Selective Membranes: Achieving the Right Polymer Recipe, Anal Chim Acta, 403, 77, 10.1016/S0003-2670(99)00647-9
Qin, 2002, Plasticizer-Free Polymer Membrane Ion-Selective Electrodes Containing a Methacrylic Copolymer Matrix, Electroanalysis, 14, 1375, 10.1002/1521-4109(200211)14:19/20<1375::AID-ELAN1375>3.0.CO;2-8
Lisak, 2009, New Polyacrylate-based Lead(II) Ion-Selective Electrodes, Microchim Acta, 164, 293, 10.1007/s00604-008-0089-z
Xie, 2013, Preparation of Solid Contact Potentiometric Sensors with Self-Plasticizing Triblock Polymer and Ionic Liquid-Polymer Composites, Sens Actuators B, 186, 321, 10.1016/j.snb.2013.06.026
Pechenkina, 2015, Materials for the Ionophore-Based Membranes for Ion-Selective Electrodes: Problems and Achievements, Russ J Electrochem, 51, 93, 10.1134/S1023193515020111
Carey, 2017, Semifluorinated Polymers as Ion-selective Electrode Membrane Matrixes, Electroanalysis, 29, 739, 10.1002/elan.201600586
Safronova, 2017, Sensitivity of Potentiometric Sensors based on Nafion®-type Membranes and Effect of the Membranes Mechanical, Thermal, and Hydrothermal Treatments on the on Their Properties, Sens Actuators B, 240, 1016, 10.1016/j.snb.2016.09.010
Mendecki, 2016, Simple, robust, and plasticizer-free iodide-selective sensor based on copolymerized triazole-based ionic liquid, Anal Chem, 88, 4311, 10.1021/acs.analchem.5b04461
Abbas, 2018, Highly Sensitive and Selective Solid-contact Calcium Sensor based on Schiff base of Benzil with 3-Aminosalycilic Acid Covalently Attached to Polyacrylic Acid Amide for Health Care, J Solid State Electrochem, 22, 181, 10.1007/s10008-017-3727-8
Keil, 1977, Ion-selective electrode membrane system based on a vinyl chloride-vinyl alcohol copolymer matrix and its role for accommodating grafted alkyl phosphate sensors, Analyst, 102, 274, 10.1039/an9770200274
Frend, 1983, Studies of calcium ion-selective electrodes in the presence of anionic surfactants, Analyst, 108, 1072, 10.1039/an9830801072
Joon, 2017, Influence of Phosphate Buffer and Proteins on the Potentiometric Response of a Polymeric Membrane-based Solid-Contact Pb(II) Ion-Selective Electrode, Electrochim Acta, 252, 490, 10.1016/j.electacta.2017.08.126
Rich, 2016, Circumventing traditional conditioning protocols in polymer membrane-based ion-selective electrodes, Anal Chem, 88, 8404, 10.1021/acs.analchem.6b01542
Wang, 2017, Integrated Multi-ISE Arrays with Improved Sensitivity, Accuracy and Precision, Sci Rep, 7, 44771, 10.1038/srep44771
Toribara, 1957, The ultrafiltrable calcium of human serum. I. Ultrafiltration methods and normal values, J Clin Invest, 36, 738, 10.1172/JCI103477
Burman, 1976, Ionized and total serum calcium and parathyroid hormone in hyperthyroidism, Ann Intern Med, 84, 668, 10.7326/0003-4819-84-6-668
Trudeau, 1967, Determination of calcium in urine and serum by atomic absorption spectrophotometry (AAS), Clin Chem, 13, 101, 10.1093/clinchem/13.2.101
Chai, 2004, Study on the Concentration of Sodium Potassium and Sodium-Potassium Ratio in Saliva of Normal People, J Modern Stomatology, 18, 528
Gu, 2005, Examination of Inorganic Ions Na+, Cl-, Ca2+ in the Sweats of the Patients UV, Chin J Basic Med Tradit Chin Med, 11, 371
He, 2012, Study on Determination of Mineral Elements in Milk, Feed Ind, 33, 53
Cattrall, 1971, Coated Wire Ion-Selective Electrodes, Anal Chem, 43, 1905, 10.1021/ac60307a032
James, 1972, Coated wire ion-selective electrodes, Anal Chem, 44, 856, 10.1021/ac60312a046
Van de Velde, 2016, Solid Contact Potassium Selective Electrodes for Biomedical Applications–A Review, Talanta, 160, 56, 10.1016/j.talanta.2016.06.050
Cosofret, 1994, Ion-Selective Microchemical Sensors with Reduced Preconditioning Time. Membrane Biostability Studies and Applications in Blood Analysis, Anal Lett, 27, 3039, 10.1080/00032719408000310
Asif, 2009, Functionalized Zinc Oxide Nanorod with Ionophore-Membrane Coating as an Intracellular Ca2+ Selective Sensor, Appl Phys Lett, 95, 10.1063/1.3176441
Mitrou, 2014, A Calcium Solid State Ion Selective Minisensor Based on Lipid Films on ZnO Nanorods, Electroanalysis, 26, 919, 10.1002/elan.201400089
Pandey, 2012, Calcium Ion-Sensor based on Polyindole-Camphorsulfonic Acid Composite, J Appl Polym Sci, 125, 2993, 10.1002/app.36348
Lewenstam, 2014, Routines and challenges in clinical application of electrochemical ion-sensors, Electroanalysis, 26, 1171, 10.1002/elan.201400061
Podrażka, 2019, Facilitated cation transfer at a three-phase junction and its applicability for ionophore evaluation, Electrochim Acta, 307, 326, 10.1016/j.electacta.2019.03.201
Wang, 2006, Electrochemical biosensors: towards point-of-care cancer diagnostics, Biosens Bioelectron, 21, 1887, 10.1016/j.bios.2005.10.027
Kong, 2021, A RT-LAMP based hydrogen ion selective electrode sensing for effective detection HIV-1 RNA with high-sensitivity, Sens Actuators B, 329, 10.1016/j.snb.2020.129118
Crespo, 2017, Recent Advances in Ion-Selective Membrane Electrodes for In Situ Environmental Water Analysis, Electrochim Acta, 245, 1023, 10.1016/j.electacta.2017.05.159
Ding, 2017, Solid-Contact Potentiometric Sensor for the Determination of Total Ammonia Nitrogen in Seawater, Int J Electrochem Sci, 12, 3296, 10.20964/2017.04.01
Athavale, 2015, In Situ Ammonium Profiling Using Solid-Contact Ion-Selective Electrodes in Eutrophic Lakes, Anal Chem, 87, 11990, 10.1021/acs.analchem.5b02424
Athavale, 2017, Robust Solid-Contact Ion Selective Electrodes for High-Resolution In-Situ Measurements in Fresh Water Systems, Environ Sci Technol Lett, 4, 286, 10.1021/acs.estlett.7b00130
Vlasov, 2005, Nonspecific sensor arrays (“electronic tongue”) for chemical analysis of liquids (IUPAC Technical Report), Pure Appl Chem, 77, 1965, 10.1351/pac200577111965
Vlasov, 2000, Electronic tongue-new analytical tool for liquid analysis on the basis of non-specific sensors and methods of pattern recognition, Sens Actuators B, 65, 235, 10.1016/S0925-4005(99)00323-8
Escriche, 2012, A potentiometric electronic tongue for according to the botanical origin. Comparison with traditional methodologies: Physicochemical parameters and volatile profile, J Food Eng, 109, 449, 10.1016/j.jfoodeng.2011.10.036
Dias, 2009, An electronic tongue taste evaluation: Identification of goat milk adulteration with bovine milk, Sens Actuators B, 136, 209, 10.1016/j.snb.2008.09.025
Evtugyn, 2010, Discrimination of Apple Juice and Herbal Liqueur Brands with Solid-State Electrodes Covered with Polyaniline and Thiacalixarenes, Talanta, 82, 613, 10.1016/j.talanta.2010.05.016
Evtugyn, 2011, Potentiometric Sensors Based on Polyaniline and Thiacalixarenes for Green Tea Discrimination, Electroanalysis, 23, 1081, 10.1002/elan.201000586
Lvova, 2003, Multicomponent analysis of Korean green tea by means of disposable all-solid-state potentiometric electronic tongue microsystem, Sens Actuators B, 95, 391, 10.1016/S0925-4005(03)00445-3
Yin, 2021, Rapid Discrimination of Beer Flavors Using Ion-Selective Electrode Array System Combined with Chemometrics, Food Anal Methods, 14, 1836, 10.1007/s12161-021-02005-4
Daikuzono, 2019, Paper based electronic tongue–A low-cost solution for the distinction of sugar type and apple juice brand, Analyst, 144, 2827, 10.1039/C8AN01934G
Semenov, 2019, Determination of three quality parameters in vegetable oils using potentiometric e-tongue, J Food Compos Anal, 75, 75, 10.1016/j.jfca.2018.09.015
Dias, 2014, Single-cultivar extra virgin olive oil classification using a potentiometric electronic tongue, Food Chem, 160, 321, 10.1016/j.foodchem.2014.03.072
Nag, 2017, Wearable Flexible Sensors: A Review, IEEE Sensors J, 17, 3949, 10.1109/JSEN.2017.2705700
Matzeu, 2016, An Integrated Sensing and Wireless Communications Platform for Sensing Sodium in Sweat, Anal Methods, 8, 64, 10.1039/C5AY02254A
Glennon, 2016, ‘SWEATCH’: A Wearable Platform for Harvesting and Analysing Sweat Sodium Content, Electroanalysis, 28, 1283, 10.1002/elan.201600106
Gao, 2016, Fully Integrated Wearable Sensor Arrays for Multiplexed in Situ Perspiration Analysis, Nature, 529, 509, 10.1038/nature16521
Wang, 2021, Engineering Materials for Electrochemical Sweat Sensing, Adv Funct Mater, 31, 2008130, 10.1002/adfm.202008130
Zhai, 2020, Vertically aligned gold nanowires as stretchable and wearable epidermal ion-selective electrode for noninvasive multiplexed sweat analysis, Anal Chem, 92, 4647, 10.1021/acs.analchem.0c00274
Lim, 2020, Wireless, flexible, ion-selective electrode system for selective and repeatable detection of sodium, Sensors, 20, 3297, 10.3390/s20113297
Lim, 2021, Development of flexible ion-selective electrodes for saliva sodium detection, Sensors, 21, 1642, 10.3390/s21051642
Wang, 2020, Highly stretchable potentiometric ion sensor based on surface strain redistributed fiber for sweat monitoring, Talanta, 214, 10.1016/j.talanta.2020.120869
Li, 2021, Microneedle-Based Potentiometric Sensing System for Continuous Monitoring of Multiple Electrolytes in Skin Interstitial Fluids, ACS Sens, 6, 2181, 10.1021/acssensors.0c02330
Roy, 2017, Carbon Nanotube-Based Ion Selective Sensors for Wearable Applications, ACS Appl Mater Interfaces, 9, 35169, 10.1021/acsami.7b07346
Miller, 2014, Polsky Microneedle-Based Transdermal Sensor for On-Chip Potentiometric Determination of K+, Adv Health Mater, 3, 876, 10.1002/adhm.201300541
Wang, 2021, Sensing of inorganic ions in microfluidic devices, Sensors Actuators B, 329, 10.1016/j.snb.2020.129171
Lisak, 2015, Paper-Based Microfluidic Sampling for Potentiometric Determination of Ions, Sens Actuators B, 207, 933, 10.1016/j.snb.2014.07.044
Blaz, 2013, Multielectrode Potentiometry in A One-Drop Sample, Electrochem Commun, 34, 181, 10.1016/j.elecom.2013.05.021
Ding, 2017, Paper-Based Microfluidic Sampling and Separation of Analytes for Potentiometric Ion Sensing, Sens Actuators B, 243, 346, 10.1016/j.snb.2016.11.128
Pesaran, 2021, An All-in-One Solid State Thin-Layer Potentiometric Sensor and Biosensor Based on Three-Dimensional Origami Paper Microfluidics, Biosensors, 11, 44, 10.3390/bios11020044
Ding, 2020, Solid reference electrode integrated with paper-based microfluidics for potentiometric ion sensing, Sens Actuators B, 323, 10.1016/j.snb.2020.128680
Rahimi, 2017, Highly Stretchable Potentiometric pH Sensor Fabricated via Laser Carbonization and Machining of Carbon−Polyaniline Composite, ACS Appl Mater Interfaces, 9, 9015, 10.1021/acsami.6b16228
Choudhury, 2021, Potentiometric ion-selective sensors based on UV-ozone irradiated laser-induced graphene electrode, Electrochim Acta, 387, 10.1016/j.electacta.2021.138341
Kim, 2021, Highly Concentrated, Conductive, Defect-free Graphene Ink for Screen-Printed Sensor Application, Nano-Micro Lett, 13, 87, 10.1007/s40820-021-00617-3
Lim, 2021, All-in-one, wireless, fully flexible sodium sensor system with integrated Au/CNT/Au, Sens Actuators B, 331, 10.1016/j.snb.2020.129416
Zhao, 2021, A thread-based wearable sweat nanobiosensor, Biosens Bioelectron, 188, 10.1016/j.bios.2021.113270
Goud, 2021, Textile-based wearable solid-contact flexible fluoride sensor: Toward biodetection of G-type nerve agents, Biosensors Bioelectronics, 182, 10.1016/j.bios.2021.113172
Choi, 2017, A wearable potentiometric sensor with integrated salt bridge for sweat chloride measurement, Sens Actuators B, 250, 673, 10.1016/j.snb.2017.04.129
Guinovart, 2014, Bandage-based wearable potentiometric sensor for monitoring wound pH, Electroanalysis, 26, 1345, 10.1002/elan.201300558
Yao, 2005, A wearable point-of-care system for home use that incorporates plug-and-play and wireless standards, IEEE Trans Inform Technol Biomed, 9, 363, 10.1109/TITB.2005.854507
Heikenfeld, 2018, Wearable sensors: modalities, challenges, and prospects, Lab Chip, 18, 217, 10.1039/C7LC00914C
da Silva, 2017, Electrochemical biosensors in point-of-care devices: recent advance and future trends, Chemelectrochem, 4, 778, 10.1002/celc.201600758
Yoo, 2017, Real-time electrical detection of epidermal skin MoS2 biosensor for point-of-care diagnostics, Nano Res, 10, 767, 10.1007/s12274-016-1289-1
Imani, 2016, A wearable chemical–electrophysiological hybrid biosensing system for real-time health and fitness monitoring, Nature Commun, 7, 11650, 10.1038/ncomms11650
Malzahn, 2011, Wearable electrochemical sensors for in situ analysis in marine environments, Analyst, 136, 2912, 10.1039/c1an15193b
Chai, 2021, Cohabiting Plant-Wearable Sensor In Situ Monitors Water Transport in Plant, Adv Sci, 8, 2003642, 10.1002/advs.202003642
Shao, 2020, Recent advances in solid-contact ion-selective electrodes: functional materials, transduction mechanisms, and development trends, Chem Soc Rev, 49, 4405, 10.1039/C9CS00587K
McGraw, 2008, Evaluation of Liquid- and Solid-Contact, Pb2+-Selective Polymer-Membrane Electrodes for Soil Analysis, Electroanalysis, 20, 340, 10.1002/elan.200704068
Abu Shawish, 2012, A Comparative Study of Solid and Liquid Inner Contact Benzalkonium Chloride Ion-Selective Electrode Membranes, Talanta, 101, 211, 10.1016/j.talanta.2012.09.005
Fahem, 2019, A point of care screen printed potentiometric sensor for therapeutic monitoring of vecuronium, Microchem J, 147, 532, 10.1016/j.microc.2019.03.065
Rezk, 2017, J Electrochem Soc, 164, H628, 10.1149/2.0921709jes
Abd El-Rahman, 2021, A Novel in Situ Electrochemical Strategy for Gatifloxacin Microdetermination in Urine Using Solid Contact and Disposal Screen-Printed Electrodes: a Comparative Study, J Anal Chem, 76, 243, 10.1134/S1061934821020064
Bieg, 2017, Introduction to Polymer-Based Solid-Contact Ion-Selective Electrodes-Basic Concepts Practical Considerations and Current Research Topics, Anal Bioanal Chem, 409, 45, 10.1007/s00216-016-9945-6
Lindner, 1993, In Vivo and in Vitro Testing of Microelectronically Fabricated Planar Sensors Designed for Applications in Cardiology, Fresenius J Anal Chem, 346, 584, 10.1007/BF00321250
Bobacka, 1994, All Solid-state Poly(vinyl chloride) Membrane Ion-selective Electrodes with Poly(3-octylthiophene) Solid Internal Contact, Analyst, 119, 1985, 10.1039/an9941901985
Gyurcsanyi, 2004, Microfabricated ISEs: Critical Comparison of Inherently Conducting Polymer and Hydrogel Based Inner Contacts, Talanta, 63, 89, 10.1016/j.talanta.2003.12.002
Lindfors, 1999, Characterization of a Single-piece All-Solid-State Iithium-Selective Electrode Based on Soluble Conducting Polyaniline, Anal Chim Acta, 385, 163, 10.1016/S0003-2670(98)00587-X
Li, 1991, Measurement of Concentration Profiles Inside a Nitrite Ion-Selective Electrode Membrane, Anal Chem, 63, 2168, 10.1021/ac00019a018
Li, 1996, Comparison of Numerical Modeling of Water Uptake in Poly(vinyl chloride)-Based Ion-Selective Membranes with Experiment, Anal Chem, 68, 1726, 10.1021/ac9505583
Li, 1996, Dual-Sorption Model of Water Uptake in Poly(vinyl chloride)-Based Ion-Selective Membranes: Experimental Water Concentration and Transport Parameters, Anal Chem, 68, 1717, 10.1021/ac950557a
Cha, 1991, Electrochemical Performance Biocompatibility and Adhesion of New Polymer Matrices for Solid-State Ion Sensors, Anal Chem, 63, 1666, 10.1021/ac00017a003
Fibbioli, 2000, Potential Drifts of Solid-Contacted Ion-Selective Electrodes Due to Zero-Current Ion Fluxes through the Sensor Membrane, Electroanalysis, 12, 1286, 10.1002/1521-4109(200011)12:16<1286::AID-ELAN1286>3.0.CO;2-Q
De Marco, 2008, Evidence of a Water Layer in Solid-Contact Polymeric Ion Sensors, Phys Chem Chem Phys, 10, 73, 10.1039/B714248J
Tantawy, 2021, A Novel Glassy Carbon Electrode Modified with Multi-Walled Carbon Nanotubes for Potentiometric Xipamide Determination, J Electrochem Soc, 168, 056506, 10.1149/1945-7111/abfcdb
Sundfors, 2011, Influence of Poly(3-octylthiophene) on the Water Transport Through Methacrylic-Acrylic Based Polymer Membranes, Electroanalysis, 23, 1769, 10.1002/elan.201100076
Lindfors, 2009, FTIR-ATR Study of Water Uptake and Diffusion Through Ion Selective Membranes Based on Plasticized Poly(vinyl chloride), Electroanalysis, 21, 1914, 10.1002/elan.200904609
Lindfors, 2011, The Water Uptake of Plasticized Poly(vinyl chloride) Solid-Contact Calcium-Selective Electrodes, Electroanalysis, 23, 2156, 10.1002/elan.201100219
Lindfors, 2011, Hyphenated FT-IR-Attenuated Total Reflection and Electrochemical Impedance Spectroscopy Technique to Study the Water Uptake and Potential Stability of Polymeric Solid-Contact Ion-Selective Electrodes, Anal Chem, 83, 4902, 10.1021/ac200597b
Sundfors, 2009, FTIR-ATR study of water uptake and diffusion through ion-selective membranes based on poly(acrylates) and silicone rubber, Anal Chem, 81, 5925, 10.1021/ac900727w
He, 2013, Determination of Water Uptake of Polymeric Ion-Selective Membranes with the Coulometric Karl Fischer and FT-IR-Attenuated Total Reflection Techniques, Anal Chem, 85, 1006, 10.1021/ac3027838
Jiang, 2019, Improving the Biocompatibility of Polymeric Membrane Potentiometric Ion Sensors by Using a Mussel-Inspired Polydopamine Coating, Anal Chem, 91, 6424, 10.1021/acs.analchem.9b00039
Kang, 2017, Revealing the formation mechanism of insoluble polydopamine by using a simplified model system, Polym Chem, 8, 860, 10.1039/C6PY02005D
Qi, 2021, Polymeric membrane ion-selective electrodes with anti-biofouling properties by surface modification of silver nanoparticles, Sens Actuators B, 328, 10.1016/j.snb.2020.129014
Qi, 2021, Enhancing the Oil-Fouling Resistance of Polymeric Membrane Ion-Selective Electrodes by Surface Modification of a Zwitterionic Polymer-Based Oleophobic Self-Cleaning Coating, Anal Chem, 93, 6932, 10.1021/acs.analchem.1c01116
Stefanova, 1983, Solid-contact ion-selective electrodes based on neutral complexing agents, Elektrokhimiya (Sov Electrochem), 19, 1225
Fibbioli, 2000, Redox-Active Self-Assembled Monolayers as Novel Solid Contacts for Ion-Selective Electrodes, Chem Commun, 339, 10.1039/a909532b
Fibbioli, 2002, Redox-Active Self-Assembled Monolayers for Solid-Contact Polymeric Membrane Ion-Selective Electrodes, Chem Mater, 14, 1721, 10.1021/cm0109589
Grygołowicz-Pawlaka, 2005, Studies on Ferrocene Organothiol Monolayer as an Intermediate Phase of Potentiometric Sensors with Gold Inner Contact, Sens Actuators B, 111–112, 310, 10.1016/j.snb.2004.12.038
Li, 2017, Simple and Rapid Mercury Ion Selective Electrode based on 1-Undecanethiol Assembled Au Substrate and Its Recognition Mechanism, Mater Sci Eng: C, 72, 26, 10.1016/j.msec.2016.11.034
Mamiñska, 2006, Ammonium-and Nitrate-Selective All-Solid-State Microelectrodes Based on AgI-Ag2O-V2O5 Glass Transducer, Chem Anal (Warsaw), 51, 899
Mamińska, 2007, AgI-Ag2O-V2O5 Glasses as Ion-to-Electron Transducers for the Construction of All-Solid-State Microelectrodes, Microchim Acta, 159, 311, 10.1007/s00604-007-0753-8
Zou, 2013, Solid Contact Ion-Selective Electrodes with a Well-Controlled Co(II)/Co(III) Redox Buffer Layer, Anal Chem, 85, 9350, 10.1021/ac4022117
Zou, 2014, Calibration-Free Ionophore-Based Ion-Selective Electrodes with a Co(II)/Co(III) Redox Couple-Based Solid Contact, Anal Chem, 86, 8687, 10.1021/ac501625z
Jaworska, 2017, Introducing Cobalt(II) Porphyrin/cobalt(III) Corrole Containing Transducers for Improved Potential Reproducibility and Performance of All Solid-State Ion-Selective Electrodes, Anal Chem, 89, 7107, 10.1021/acs.analchem.7b01027
Paczosa-Bator, 2015, Application of nanostructured TCNQ to potentiometric ion-selective K+ and Na+ Electrodes, Anal Chem, 87, 1718, 10.1021/ac503521t
Pięk, 2016, The Complex Crystal of NaTCNQ–TCNQ Supported on Different Carbon Materials as Ion-to-Electron Transducer in All-Solid-State Sodium-Selective Electrode, J Electrochem Soc, 163, B573, 10.1149/2.0341613jes
Ishige, 2016, Intercalation Compounds as Inner Reference Electrodes for Reproducible and Robust Solid-Contact Ion-Selective Electrodes, Angew Chem Int Ed, 55, 4831, 10.1002/anie.201600111
Komaba, 2017, All-Solid-State Ion-Selective Electrodes with Redox-Active Lithium, Sodium, and Potassium Insertion Materials as Inner Solid-Contact Layer, Analyst, 142, 3857, 10.1039/C7AN01068K
Klink, 2017, Prussian Blue Analogues: A Versatile Framework for Solid-Contact Ion-Selective Electrodes with Tunable Potentials, ChemElectroChem, 4, 490, 10.1002/celc.201700091
Gabrielli, 2005, An Electrogravimetric Study of an All-Solid-State Potassium Selective Electrode with Prussian Blue as the Electroactive Solid Internal Contact, J Electrochem Soc, 152, H219, 10.1149/1.2104047
Ghosh, 2017, All-Solid-State Sodium-Selective Electrode with a Solid Contact of Chitosan/Prussian Blue Nanocomposite, Sensors, 17, 2536, 10.3390/s17112536
Stefanova, 1990, Solid-contact electrodes with a stabilizing redox system: dependencies determining the potential at the boundary with an internal current collector, Elektrokhimiya, 26, 976
Oyama, 1988, Ion-Selective Electrodes Based on Bilayer Film Coating, J Macromol Sci A, 25, 1463, 10.1080/00222338808053434
Ping, 2013, Design and Synthesis of a Task-Specific Ionic Liquid as a Transducer in Potentiometric Sensors, RSC Adv, 3, 19782, 10.1039/c3ra23367g
Chernyshov, 2009, Low-melting ionic solids: versatile materials for ion-sensing devices, ACS applied mater interfaces, 1, 2055, 10.1021/am9004072
Wardak, 2013, Application of Ionic Liquid to the Construction of Cu(II) Ion-Selective Electrode with Solid Contact, Sens Actuators B, 189, 52, 10.1016/j.snb.2012.12.065
Wardak, 2014, Solid Contact Nitrate Ion-Selective Electrode Based on Ionic Liquid with Stable and Reproducible Potential, Electroanalysis, 26, 864, 10.1002/elan.201300590
Wardak, 2013, 1-Hexyl-3-methylimidazolium Hexafluorophosphate as New Component of Polymeric Membrane of Lead ion-Selective Electrode, Desalin Water Treat, 51, 658, 10.1080/19443994.2012.745299
Nanjo, 1975, An investigation of polyphenyl-onium bases and other materials for phosphate ion-selective electrodes, Anal Chim Acta, 77, 19, 10.1016/S0003-2670(01)95151-7
Mitrakas, 1991, Nitrate ion-selective electrodes based on quaternary phosphonium salts in plasticized poly(vinyl chloride) and influence of membrane homogeneity on their performance, Analyst, 116, 361, 10.1039/an9911600361
Fan, 2017, Determination of Copper(II) Ion in Food Using an Ionic Liquids-Carbon Nanotubes-based Ion-Selective Electrode, J Food Comp Anal, 62, 63, 10.1016/j.jfca.2017.05.003
Jaworska, 2011, Lowering the Resistivity of Polyacrylate Ion-Selective Membranes by Platinum Nanoparticles Addition, Anal Chem, 83, 438, 10.1021/ac1019864
Paczosa-Bator, 2012, Platinum Nanoparticles Intermediate Layer in Solid-State Selective Electrodes, Analyst, 137, 5272, 10.1039/c2an35933b
Janrungroatsakul, 2013, Development of Coated-Wire Silver Ion Selective Electrodes on Paper Using Conductive Films of Silver Nanoparticles, Analyst, 138, 6786, 10.1039/c3an01385e
Yin, 2014, All-Solid-State Polymeric Membrane Ion-Selective Miniaturized Electrodes Based on a Nanoporous Gold Film as Solid Contact, Anal Chem, 86, 11038, 10.1021/ac5029209
Zhou, 2012, Effective Solid Contact for Ion-Selective Electrodes: Tetrakis(4-chlorophenyl)borate(TB-) Anions Doped Nanocluster Films, Anal Chem, 84, 3480, 10.1021/ac300473a
Xu, 2016, Simple and Efficient Synthesis of Gold Nanoclusters and Their Performance as Solid Contact of Ion Selective Electrode, Electrochim Acta, 222, 1007, 10.1016/j.electacta.2016.11.069
Jaworska, 2011, Gold Nanoparticles Solid Contact for Ion-Selective Electrodes of Highly Stable Potential Readings, Talanta, 85, 1986, 10.1016/j.talanta.2011.07.049
Woznica, 2013, Dithizone Modified Gold Nanoparticles Films as Solid Contact for Cu2+ Ion-Selective Electrodes, Electroanalysis, 25, 141, 10.1002/elan.201200385
Xu, 2015, Unraveling Structures of Protection Ligands on Gold Nanoparticle Au68(SH)32, Sci Adv, 1, 10.1126/sciadv.1400211
Wang, 2013, Space-Confined Fabrication of Silver Nanodendrites and Their Enhanced SERS Activity, Nanoscale, 5, 4284, 10.1039/c3nr00313b
Wang, 2017, Wearable Sweatband Sensor Platform Based on Gold Nanodendrite Array as Efficient Solid Contact of Ion-Selective Electrode, Anal Chem, 89, 10224, 10.1021/acs.analchem.7b01560
An, 2016, Robust Single-Piece All-Solid-State Potassium-Selective Electrode with Monolayer-Protected Au Clusters, J Electroanal Chem, 781, 272, 10.1016/j.jelechem.2016.10.053
Liu, 2020, Bimetallic aucu nanoparticles coupled with multi-walled carbon nanotubes as ion-to-electron transducers in solid-contact potentiometric sensors, Electrochim Acta, 331, 10.1016/j.electacta.2019.135370
MacDiarmid, 2001, “Synthetic Metals”: a Novel Role for Organic Polymers (Nobel Lecture), Angew Chem Int Ed, 40, 2581, 10.1002/1521-3773(20010716)40:14<2581::AID-ANIE2581>3.0.CO;2-2
Baker, 2017, Polyaniline nanofibers: broadening applications for conducting polymers, Chem Soc Rev, 46, 1510, 10.1039/C6CS00555A
Li, 2002, Novel Multifunctional Polymers from Aromatic Diamines by Oxidative Polymerizations, Chem Rev, 102, 2925, 10.1021/cr010423z
Li, 2008, Self-Stabilized Nanoparticles of Intrinsically Conducting Copolymers from 5-Sulfonic-2-Anisidine, Small, 4, 1201, 10.1002/smll.200701002
Li, 2008, Facile High-Yield Synthesis of Polyaniline Nanosticks with Intrinsic Stability and Electrical Conductivity, Chem Eur J, 14, 10309, 10.1002/chem.200801025
Li, 2009, Facile Optimal Synthesis of Inherently Electroconductive Polythiophene Nanoparticles, Chem Eur J, 15, 6446, 10.1002/chem.200900181
Li, 2010, Efficient and Scalable Synthesis of Pure Polypyrrole Nanoparticles Applicable for Advanced Nanocomposites and Carbon Nanoparticles, J Phys Chem C, 114, 19244, 10.1021/jp107435b
Li, 2007, Synthesis Film-Forming and Electronic Properties of o-Phenylenediamine Copolymers Displaying an Uncommon Tricolor, Macromolecules, 40, 1489, 10.1021/ma062463g
Li, 2004, The Preparation of Polyaniline Waterborne Latex Nanoparticles and Their Films with Anti-Corrosivity and Semi-Conductivity, Colloids Surfaces A, 248, 111, 10.1016/j.colsurfa.2004.08.077
Hashemi, 2018, The use of an electrocatalytic redox electrolyte for pushing the energy density boundary of a flexible polyaniline electrode to a new limit, Nano Energy, 44, 489, 10.1016/j.nanoen.2017.11.058
Bobacka, 2006, Conducting Polymer-Based Solid-State Ion-Selective Electrodes, Electroanalysis, 18, 7, 10.1002/elan.200503384
Bobacka, 1999, Plasticizer-Free All-Solid-State Potassium-Selective Electrode Based on Poly(3-octylthiophene) and Valinomycin, Anal Chim Acta, 385, 195, 10.1016/S0003-2670(98)00667-9
Mosayebzadeh, 2014, Preparation of a Solid-State Ion-Selective Electrode Based on Polypyrrole Conducting Polymer for Magnesium Ion, J Iran Chem Soc, 11, 447, 10.1007/s13738-013-0317-2
Xing, 2017, Determination of Sulfate in Seawater by a Novel All-Solid-State Sulfate Sensor with H2SO4 Doped Polyaniline as Sensitive Membrane, Int J Electrochem Sci, 12, 1506, 10.20964/2017.02.52
Shishkanová, 2017, Influence of Surface Properties on the Deposition of a Polyaniline Film and Detection of Tumor Markers, Chem Papers, 71, 489, 10.1007/s11696-016-0067-6
Glanc-Gostkiewicz, 2017, A Textile Based Polypyrrole Chloride Sensor for Agricultural Use, Multidisciplinary Digital Publishing Inst Proc, 1, 430
Kang, 1990, Polypyrrole modified electrode as a nitrate sensor, Bull Korean Chem Soc, 11, 124
Sun, 1997, Nitrate ion-selective sensor based on electrochemically prepared conducting polypyrrole films, Electroanalysis, 9, 494, 10.1002/elan.1140090612
Li, 2005, Facile Synthesis and Highly Reactive Silver Ion Adsorption of Novel Microparticles of Sulfodiphenylamine and Diaminonaphthalene Copolymers, Chem Mater, 17, 5411, 10.1021/cm050813s
Li, 2004, Facile Synthesis of Poly(1,8-diaminonaphthalene) Microparticles with a Very High Silver-ion Adsorbability by a Chemical Oxidative Polymerization, Acta Mater, 52, 5363, 10.1016/j.actamat.2004.07.042
Li, 2013, Ultra-Sensitive Chemosensors for Fe(III) and Explosives based on Highly Fluorescent Oligofluoranthene, Chem Sci, 4, 1970, 10.1039/c3sc22107e
Li, 2015, Efficient Synthesis of Oligofluoranthene Nanorods with Tunable Functionalities, Chem Sci, 6, 7190, 10.1039/C5SC03041B
Li, 2015, Interfacial Chemical Oxidative Synthesis of Multifunctional Polyfluoranthene, Chem Sci, 6, 2087, 10.1039/C4SC03890H
Huang, 2012, Synthesis and Strong Heavy-Metal Ion Sorption of Copolymer Microparticles from Phenylenediamine and Its Sulfonate, J Mater Chem, 22, 17685, 10.1039/c2jm32361c
Li, 2012, Interfacial Synthesis and Functionality of Self-Stabilized Polydiaminonaphthalene Nanoparticles, Chem Eur J, 18, 9877, 10.1002/chem.201200860
Lü, 2007, Synthesis and Heavy-Metal-Ion Sorption of Pure Sulfophenylenediamine Copolymer Nanoparticles with Intrinsic Conductivity and Stability, Chem Eur J, 13, 6009, 10.1002/chem.200700233
Huang, 2006, Rapid and Effective Adsorption of Lead Ions on Fine Poly(phenylenediamine) Microparticles, Chem Eur J, 12, 4341, 10.1002/chem.200501070
Li, 2009, Powerful Reactive Sorption of Silver(I) and Mercury(II) onto Poly(o-phenylenediamine) Microparticles, Langmuir, 25, 1675, 10.1021/la802410p
Li, 2009, Strong Adsorbability of Mercury Ions on Aniline/Sulfoanisidine Copolymer Nanosorbents, Chem Eur J, 15, 4573, 10.1002/chem.200802431
Li, 2010, Redox Sorption and Recovery of Silver Ions as Silver Nanocrystals on Poly(aniline-co-5-sulfo-2-anisidine) Nanosorbents, Chem Eur J, 16, 10113, 10.1002/chem.201000506
Chen, 2014, Heavy Metal Ions Removal by Nano-Sized Spherical Polymer Brushes, Chin J Polym Sci, 32, 432, 10.1007/s10118-014-1398-9
Liu, 2017, Fluorescent Detection of Cu(II) by Chitosan-based AIE Bioconjugate, Chin J Polym Sci, 35, 365, 10.1007/s10118-017-1876-y
Wang, 2010, Adsorption of Humic Substances by Macro Weakly basic Ion-Exchange Resin and Their Effects on Removal of Cu2+ and Pb2+, Chin J Polym Sci, 28, 427, 10.1007/s10118-010-9050-9
Huang, 2013, Advanced Solid-Contact Ion Selective Electrode Based on Electrically Conducting Polymers, Chin J Anal Chem, 40, 1454, 10.1016/S1872-2040(11)60572-0
Cadogan, 1992, All-Solid-State Sodium-Selective Electrode Based on a Calixarene Ionophore in a Poly(vinyl chloride) Membrane with a Polypyrrole Solid Contact, Anal Chem, 64, 2496, 10.1021/ac00045a007
Michalska, 1994, All Solid-State Hydrogen Ion-Selective Electrode Based on a Conducting Poly(pyrrole) Solid Contact, Analyst, 119, 2417, 10.1039/an9941902417
Michalska, 1997, All-Solid-State Potentiometric Sensors for Potassium and Sodium Based on Poly(pyrrole) Solid Contact, Microchem J, 57, 59, 10.1006/mchj.1997.1489
Bobacka, 1993, Potentiometric Response of Poly(3-octylthiophene) Poly(3-methylthiophene) and Polythiophene in Aqueous Solutions, Talanta, 40, 1437, 10.1016/0039-9140(93)80223-E
Bobacka, 1999, Potential Stability of All-Solid-State Ion-Selective Electrodes Using Conducting Polymers as Ion-to-Electron Transducers, Anal Chem, 71, 4932, 10.1021/ac990497z
Yu, 2011, An All-Solid-State Cd2+-Selective Electrode with a Low Detection Limit, Sens Actuators B, 155, 919, 10.1016/j.snb.2011.01.052
Yu, 2012, A Highly Selective Solid-Contact Electrode for Ag+ Based on a Monoazathiacrown Ether Ionophore, Chin Chem Lett, 23, 488, 10.1016/j.cclet.2011.12.016
Michalska, 2003, All-Solid-State Calcium Solvent Polymeric Membrane Electrode for Low-Level Concentration Measurements, Anal Chem, 75, 141, 10.1021/ac025916y
Sutter, 2004, Solid-Contact Polymeric Membrane Electrodes with Detection Limits in the Subnanomolar Range, Anal Chim Acta, 523, 53, 10.1016/j.aca.2004.07.016
Sutter, 2006, Response Behavior of Poly(vinyl chloride)- and Polyurethane-Based Ca2+-Selective Membrane Electrodes with Polypyrrole- and Poly(3-octylthiophene)-Mediated Internal Solid Contact, Electroanalysis, 18, 19, 10.1002/elan.200503373
Chumbimuni-Torres, 2006, Solid Contact Potentiometric Sensors for Trace Level Measurements, Anal Chem, 78, 1318, 10.1021/ac050749y
Rubinova, 2007, Solid-Contact Potentiometric Polymer Membrane Microelectrodes for the Detection of Silver Ions at the Femtomole Level, Sens Actuators B, 121, 135, 10.1016/j.snb.2006.09.007
Ju, 2012, All-Solid-State Zn2+-Selective Electrodes for Wastewater Measurements, Adv Mater Res, 441, 564, 10.4028/www.scientific.net/AMR.441.564
Mensah, 2014, Nanomolar Detection Limits of Cd2+, Ag+, and K+ Using Paper-Strip Ion-Selective Electrodes, Anal Chem, 86, 7269, 10.1021/ac501470p
Li, 2017, All-Solid-State Carbonate-Selective Electrode based on Screen-Printed Carbon Paste Electrode, Meas Sci Technol, 28, 10.1088/1361-6501/aa52a9
Armas, 2018, Ready-to-use single-strip paper based sensor for multiplex ion detection, Sens Actuators B, 255, 1781, 10.1016/j.snb.2017.08.194
Jarvis, 2016, Poly(3-octylthiophene) as Solid Contact for Ion-Selective Electrodes: Contradictions and Possibilities, J Solid State Electrochem, 20, 3033, 10.1007/s10008-016-3340-2
Michalska, 2006, Tailoring Solution Cast Poly(3,4-dioctyloxythiophene) Transducers for Potentiometric All-Solid-State Ion-Selective Electrodes, Electroanalysis, 18, 763, 10.1002/elan.200503466
Michalska, 2008, Method of Achieving Desired Potentiometric Responses of Polyacrylate-based Ion-Selective Membranes, Anal Chem, 80, 3921, 10.1021/ac8000622
Michalska, 2010, Experimental Study on Stability of Different Solid Contact Arrangements of Ion-Selective Electrodes, Talanta, 82, 151, 10.1016/j.talanta.2010.04.012
Rzewuska, 2008, Composite Polyacrylate−Poly(3,4-ethylenedioxythiophene) Membranes for Improved All-Solid-State Ion-Selective Sensors, Anal Chem, 80, 321, 10.1021/ac070866o
Wang, 2012, All-Solid-State Blood Calcium Sensors based on Screen-Printed Poly(3,4-Ethylenedioxythiophene) as the Solid Contact, Sens Actuators B, 173, 630, 10.1016/j.snb.2012.07.064
Xu, 2013, A Miniature All-Solid-State Calcium Electrode Applied to In Situ Seawater Measurement, Meas Sci Technol, 24, 10.1088/0957-0233/24/12/125105
Anastasova-Ivanova, 2010, Development of Miniature All-Solid-State Potentiometric Sensing System, Sens Actuators B, 146, 199, 10.1016/j.snb.2010.02.044
Jasinski, 2015, Potentiometric Solid-Contact Multisensor System for Simultaneous Measurement of Several Ions, Electroanalysis, 27, 745, 10.1002/elan.201400585
Urbanowicz, 2017, Simultaneous Determination of Na+, K+, Ca2+, Mg2+ and Cl− in Unstimulated and Stimulated Human Saliva Using All Solid State Multisensor Platform, Electroanalysis, 29, 2232, 10.1002/elan.201700149
Wagner, 2013, Durable PEDOT:PSS Films Obtained from Modified Water-Based Inks for Electrochemical Sensors, Sens Actuators B, 181, 694, 10.1016/j.snb.2013.02.051
Vanamo, 2014, Electrochemical Control of the Standard Potential of Solid-Contact Ion-Selective Electrodes Having a Conducting Polymer as Ion-to-Electron Transducer, Electrochim Acta, 122, 316, 10.1016/j.electacta.2013.10.134
Vanamo, 2016, New Signal Readout Principle for Solid-Contact Ion-Selective Electrodes, Anal Chem, 88, 4369, 10.1021/acs.analchem.5b04800
Cuartero, 2016, Electrochemical ion transfer with thin films of poly(3-octylthiophene), Anal Chem, 88, 6939, 10.1021/acs.analchem.6b01800
Guzinski, 2015, Equilibration time of solid contact ion-selective electrodes, Anal Chem, 87, 6654, 10.1021/acs.analchem.5b00775
Jeszke, 2017, Investigation of Poly(3,4-ethylenedioxythiophene) Deposition Method Influence on Properties of Ion-Selective Electrodes Based on Bis(benzo-15-crown-5) Derivatives, Electrochim Acta, 246, 424, 10.1016/j.electacta.2017.05.197
Li, 2017, An All-Solid-State Polymeric Membrane chloride ion-selective Electrode with Nanowires Poly(3,4-ethylenedioxythiophene) as Solid Contact, Int J Electrochem Sci, 12, 11715, 10.20964/2017.12.44
Sjöberg, 2016, Paper-based potentiometric ion sensors constructed on ink-jet printed gold electrodes, Sens Actuators B, 224, 325, 10.1016/j.snb.2015.10.051
Szucs, 2016, Ion-selective Electrodes with 3D Nanostructured Conducting Polymer Solid Contact, Electroanalysis, 28, 778, 10.1002/elan.201500465
Ivanko, 2021, Conjugated redox polymer with poly(3,4-ethylenedioxythiophene) backbone and hydroquinone pendant groups as the solid contact in potassium-selective electrodes, Sens Actuators B, 329, 10.1016/j.snb.2020.129231
Ruecha, 2017, Fully Inkjet-Printed Paper-based Potentiometric Ion-Sensing Devices, Anal Chem, 89, 10608, 10.1021/acs.analchem.7b03177
Vázquez, 2004, Solution-Cast Films of Poly(3,4-ethylenedioxythiophene) as Ion-to-Electron Transducers in All-Solid-State Ion-Selective Electrodes, Sens Actuators B, 97, 182, 10.1016/j.snb.2003.08.010
Park, 2021, A Highly Stable and Flexible Ca2+ Ion-Selective Sensor Based on Treated PEDOT:PSS Transducing Layer, IEEE Sensors J
Yu, 2011, A Solid-Contact Pb2+-Selective Electrode Using Poly(2-methoxy-5-(2′-ethylhexyloxy)-p-phenylene vinylene) as Ion-to-Electron Transducer, Anal Chim Acta, 702, 195, 10.1016/j.aca.2011.06.049
He, 2015, Influence of Hydrophobization of the Polyazulene Ion-to-Electron Transducer on the Potential Stability of Calcium-Selective Solid-Contact Electrodes, Sens Actuators B, 207, 918, 10.1016/j.snb.2014.10.048
He, 2016, Electropolymerized Hydrophobic Polyazulene as Solid-contacts in Potassium-selective Electrodes, Analyst, 141, 2990, 10.1039/C5AN02664D
Kuznetsova, 2005, A Papaverine-Selective Electrode with Ion-To-Electron Transducer Based on the Conducting Polymer Poly(α-naphthylamine), Pharmaceutical Chem J, 39, 97, 10.1007/s11094-005-0092-1
Pandey, 2002, Electrochemical Synthesis of Tetra-Phenylborate Doped Polypyrrole and Its Applications in Designing a Novel Zinc and Potassium Ion Sensor, Electroanalysis, 14, 427, 10.1002/1521-4109(200203)14:6<427::AID-ELAN427>3.0.CO;2-X
Kisiel, 2018, Rectifying effect for ion-selective electrodes with conducting polymer solid contact, Synth Met, 246, 246, 10.1016/j.synthmet.2018.10.019
Michalska, 2004, An Experimental Study of Membrane Materials and Inner Contacting Layers for Ion-Selective K+ Electrodes with a Stable Response and Good Dynamic Range, Anal Chem, 76, 2031, 10.1021/ac0353132
Michalska, 2005, Improvement of analytical characteristic of calcium selective electrode with conducting polymer contact. The role of conducting polymer spontaneous charge transfer processes and their galvanostatic compensation, Electroanalysis, 17, 400, 10.1002/elan.200403173
Pawłowski, 2006, Galvanostatic Polarization of All-Solid-State K+-Selective Electrodes with Polypyrrole Ion-to-Electron Transducer, Electroanalysis, 18, 1339, 10.1002/elan.200603553
Pandey, 2018, Synthesis and characterization of dendritic polypyrrole silver nanocomposite and its application as a new urea biosensor, J Appl Polym Sci, 135, 45705, 10.1002/app.45705
Kisiel, 2010, Polypyrrole Microcapsules as a Transducer for Ion-Selective Electrodes, Electrochem Commun, 12, 1568, 10.1016/j.elecom.2010.08.035
Yin, 2012, Qin WA Solid-Contact Pb2+-Selective Polymeric Membrane Electrode with Nafion-Doped Poly(pyrrole) as Ion-to-Electron Transducer, J Solid State Electrochem, 16, 499, 10.1007/s10008-011-1358-z
He, 2017, Pre-Polarized Hydrophobic Conducting Polymer Solid-Contact Ion-Selective Electrodes with Improved Potential Reproducibility, Anal Chem, 89, 2598, 10.1021/acs.analchem.6b04885
Jaworska, 2017, Polypyrrole Nanospheres-Electrochemical Properties and Application as a Solid Contact in Ion-Selective Electrodes, Electroanalysis, 29, 123, 10.1002/elan.201600554
Abbaspour, 2017, Carbon Nanotube Composite Coated Stainless Steel Disk Electrode with Polypyrrole Film as Ion-to-electron Transducer for the Determination of Hg (II), Anal Bioanal Electrochem, 9, 614
Jaworska, 2017, Polypyrrole Nanoparticles Based Disposable Potentiometric Sensors, Electroanalysis, 29, 2766, 10.1002/elan.201700441
Yu, 2017, Electrosynthesized Polypyrrole/Zeolite Composites as Solid Contact in Potassium Ion-Selective Electrode, Electrochim Acta, 228, 66, 10.1016/j.electacta.2017.01.009
Lindfors, 2010, Polyaniline Nanoparticle-Based Solid-Contact Silicone Rubber Ion-Selective Electrodes for Ultratrace Measurements, Anal Chem, 82, 9425, 10.1021/ac102099p
Huang, 2015, A novel All-Solid- State Ammonium Electrode with Polyaniline and Copolymer of Aniline/2,5-Dimethoxyaniline as Transducers, J Electroanal Chem, 741, 87, 10.1016/j.jelechem.2014.12.041
Ramanjaneyulu, 2017, Development of a New All Solid Contact Cs+ Ion Selective Electrode, J Radioanal Nucl Chem, 313, 581, 10.1007/s10967-017-5318-7
El-Rahman, 2015, Design of a stable solid-contact ion-selective electrode based on polyaniline nanoparticles as ion-to-electron transducer for application in process analytical technology as a real-time analyzer, Sens Actuators B, 208, 14, 10.1016/j.snb.2014.11.009
Liu, 2017, A Solid-Contact Pb2+-Selective Electrode Based on Electrospun Polyaniline Microfibers Film as Ion-to-Electron Transducer, Electrochim Acta, 231, 53, 10.1016/j.electacta.2017.01.162
Lindfors, 2007, Potassium-selective electrodes with stable and geometrically well-defined internal solid contact based on nanoparticles of polyaniline and plasticized poly(vinyl chloride), Anal Chem, 79, 8571, 10.1021/ac071344b
Abramova, 2016, Solid contact ion sensor with conducting polymer layer copolymerized with the ion-selective membrane for determination of calcium in blood serum, Anal Chim Acta, 943, 50, 10.1016/j.aca.2016.09.017
Holness FB, Price AD. Design and fabrication of conductive polyaniline transducers via computer controlled direct ink writing. Electroact Polym Actuat Dev (EAPAD) Int Soc Opt Photo 2017;10163:1016320.
Ceresa, 2001
Lakshmi, 2009, Chimeric Polymers Formed from a Monomer Capable of Free Radical Oxidative and Electrochemical Polymerisation, Chem Commun, 19, 2759, 10.1039/b821409c
Azevedo, 2013, Molecularly Imprinted Polymer-Hybrid Electrochemical Sensor for the Detection of β-Estradiol, Ind Eng Chem Res, 52, 13917, 10.1021/ie302999j
Akbulut, 2011, Microplates with Adaptive Surfaces, ACS Comb Sci, 13, 646, 10.1021/co200073w
Berti, 2010, Quasi-monodimensional Polyaniline Nanostructures for Enhanced Molecularly Imprinted Polymer-based Sensing, Biosens Bioelectron, 26, 497, 10.1016/j.bios.2010.07.063
He, 2015, In Situ Formation of Dual-Phase Thermosensitive Ultrasmall Gold Nanoparticles, Chem Eur J, 21, 10220, 10.1002/chem.201406670
Khripoun, 2006, Nitrate-Selective Solid Contact Electrodes with Poly(3-octylthiophene) and Poly(aniline) as Ion-to-Electron Transducers Buffered with Electron-Ion-Exchanging Resin, Electroanalysis, 18, 1322, 10.1002/elan.200603532
Lindfors, 2004, Stability of the Inner Polyaniline Solid Contact Layer in All-Solid-State K+-Selective Electrodes Based on Plasticized Poly(vinyl chloride), Anal Chem, 76, 4387, 10.1021/ac049439q
Bandodkar, 2013, Tattoo-Based Potentiometric Ion-Selective Sensors for Epidermal pH Monitoring, Analyst, 138, 123, 10.1039/C2AN36422K
Michalska, 2009, Silver and lead all-plastic sensors-polyaniline vs. poly(3,4-ethyledioxythiophene) solid contact, J Solid State Electrochem, 13, 99, 10.1007/s10008-008-0563-x
Vázquez, 2002, Influence of Oxygen and Carbon Dioxide on the Electrochemical Stability of Poly(3,4-Ethylenedioxythiophene) Used as Ion-to-Electron Transducer in All-Solid-State Ion-Selective Electrodes, Sens Actuators B, 82, 7, 10.1016/S0925-4005(01)00983-2
Bobacka, 2003, Potentiometric Ion Sensors Based on Conducting Polymers, Electroanalysis, 15, 366, 10.1002/elan.200390042
Veder, 2011, Water Uptake in the Hydrophilic Poly(3,4-ethylenedioxythiophene): Poly(styrene Sulfonate) Solid-Contact of All-Solid-State Polymeric Ion-Selective Electrodes, Analyst, 136, 3252, 10.1039/c1an15267j
Veder, 2012, An Electrochemical Impedance Spectroscopy/Neutron Reflectometry Study of Water Uptake in the Poly(3,4-Ethylenedioxythiophene): Poly(Styrene Sulfonate)/Polymethyl Methacrylate-Polydecyl Methacrylate Copolymer Solid-Contact Ion-Selective Electrode, Electroanalysis, 24, 140, 10.1002/elan.201100524
Lindfors, 2009, Light sensitivity and potential stability of electrically conducting polymers commonly used in solid contact ion-selective electrodes, J Solid State Electrochem, 13, 77, 10.1007/s10008-008-0561-z
Guzinski, 2017, Solid Contact pH Sensor without CO2 Interference with a Super Hydrophobic PEDOT-C14 as Solid Contact: the Ultimate “Water Layer” Test, Anal Chem, 89, 8468, 10.1021/acs.analchem.7b02009
Pathiranage, 2017, Role of Polythiophenes as Electroactive Materials, J Polym Sci Part A: Polym Chem, 55, 3327, 10.1002/pola.28726
Abbaspour, 2010, A Highly Selective and Sensitive Disposable Carbon Composite PVC-based Membrane for Determination of Lead Ion in Environmental Samples, J Hazard Mater, 174, 656, 10.1016/j.jhazmat.2009.09.101
Abbaspour, 2004, Carbon Composition PVC based Membrane in a Highly Selective and Sensitive Coated Wire Electrode for Silver Ion, Anal Chim Acta, 525, 91, 10.1016/j.aca.2004.07.074
Abbaspour, 2006, Platinum Electrode Coated with a Bentonite-Carbon Composite as an Environmental Sensor for Detection of Lead, Anal Bioanal Chem, 386, 1559, 10.1007/s00216-006-0727-4
Suzuki, 2005, Flow resistance of a liquid droplet confined between two hydrophobic surfaces, Microsystem Technol, 11, 1107, 10.1007/s00542-005-0510-z
Mattinen, 2011, Impedance Study of the Ion-to-Electron Transduction Process for Carbon Cloth as Solid-Contact Material in Potentiometric ion sensors, Electrochim Acta, 56, 10683, 10.1016/j.electacta.2011.07.082
Cincy, 2017, Fabrication of a Flexible Carbon Cloth based Solid Contact Iodide Selective Electrode, Anal Methods, 9, 2947, 10.1039/C7AY00733G
Tutulea-Anastasiu, 2013, A Solid-Contact Ion Selective Electrode for Copper(II) Using a Succinimide Derivative as Ionophore, Sensors, 13, 4367, 10.3390/s130404367
Eren, 2014, Potentiometric Monitoring of Cobalt in Beer Sample by Solid Contact Ion Selective Electrode, J Food Drug Anal, 22, 413, 10.1016/j.jfda.2014.03.003
Skripnikova, 2017, Towards Stabilization of the Potential Response of Mn(III) Tetraphenylporphyrin-Based Solid-State Electrodes with Selectivity for Salicylate Ions, J Solid State Electrochem, 21, 2269, 10.1007/s10008-017-3575-6
Fayose, 2017, Single Strip Solid Contact Ion Selective Electrodes on a Pencil-Drawn Electrode Substrate, Anal Methods, 9, 1213, 10.1039/C6AY02860H
Paczosa-Bator, 2012, All-Solid-State Selective Electrodes Using Carbon Black, Talanta, 93, 424, 10.1016/j.talanta.2012.02.013
Paczosa-Bator, 2014, Effects of Type of Nanosized Carbon Black on the Performance of an All-Solid-State Potentiometric Electrode for Nitrate, Microchim Acta, 181, 1093, 10.1007/s00604-014-1216-7
Paczosa-Bator, 2014, Potentiometric Sensor Platform Based on a Carbon Black Modified Electrodes, Int J Electrochem Sci, 9, 2816, 10.1016/S1452-3981(23)07970-1
Ivanova, 2013, Potassium-Selective Solid Contact Electrodes with Poly(amidoacid) Cu(I) Complex Electron-Ion Exchanging Resin and Different Sorts of Carbon Black in the Transducer Layer, Sens Actuators B, 186, 589, 10.1016/j.snb.2013.06.072
Paczosa-Bator, 2013, Potentiometric Sensors with Carbon Black Supporting Platinum Nanoparticles, Anal Chem, 85, 10255, 10.1021/ac402885y
Paczosa-Bator, 2015, Carbon-Supported Platinum Nanoparticle Solid-State Ion Selective Electrodes for the Determination of Potassium, Anal Lett, 48, 2773, 10.1080/00032719.2015.1045594
Vamvakaki, 1996, Solid-Contact Ion-Selective Electrode with Stable Internal Electrode, Anal Chim Acta, 320, 53, 10.1016/0003-2670(95)00524-2
Weber, 2017, Solid Contact Ion Selective Electrodes for In Situ Measurements at High Pressure, Anal Chem, 89, 4803, 10.1021/acs.analchem.7b00366
Lonsdale, 2017, Effect of Ordered Mesoporous Carbon Contact Layer on the Sensing Performance of Sputtered RuO2 Thin Film pH Sensor, Talanta, 164, 52, 10.1016/j.talanta.2016.11.020
Lai, 2007, Ion-Selective Electrodes with Three-Dimensionally Ordered Macroporous Carbon as the Solid Contact, Anal Chem, 79, 4621, 10.1021/ac070132b
Hu, 2014, Ion-Selective Electrodes with Colloid-Imprinted Mesoporous Carbon as Solid Contact, Anal Chem, 86, 7111, 10.1021/ac501633r
Hu, 2016, A Disposable Planar Paper-Based Potentiometric Ion-Sensing Platform, Angew Chem Int Ed, 55, 7544, 10.1002/anie.201603017
Hu, 2018, Paper-Based All-Solid-State Ion-Sensing Platform with a Solid Contact Comprising Colloid-Imprinted Mesoporous Carbon and a Redox Buffer, ACS Appl Nano Mater, 1, 293, 10.1021/acsanm.7b00151
Lan, 2014, Paper-Based Potentiometric Ion Sensing, Anal Chem, 86, 9548, 10.1021/ac5018088
Hu, 2015, All-Solid-State Reference Electrodes Based on Colloid-Imprinted Mesoporous Carbon and Their Application in Disposable Paper-based Potentiometric Sensing Devices, Anal Chem, 87, 2981, 10.1021/ac504556s
Lewenstam, 2017, All-solid-state reference electrode with heterogeneous membrane, Anal Chem, 89, 1068, 10.1021/acs.analchem.6b02762
Ye, 2015, Using sp2-C Dominant Porous Carbon Sub-Micrometer Spheres as Solid Transducers in Ion-Selective Electrodes, Electrochem Commun, 50, 60, 10.1016/j.elecom.2014.10.014
Fouskaki, 2008, Fullerene-Based Electrochemical Buffer Layer for Ion-Selective Electrodes, Analyst, 133, 1072, 10.1039/b719759d
Mousavi, 2009, All-Solid-State Potassium Ion-Selective Electrode with Conducting Polymer Doped with Carbon Nanotubes and C60 as the Ion-to-Electron Transducing Layers, ECS Trans, 19, 19, 10.1149/1.3118534
Li, 2015, An All-Solid-State Polymeric Membrane Pb2+-Selective Electrode with Bimodal Pore C60 as Solid Contact, Anal Chim Acta, 876, 49, 10.1016/j.aca.2015.03.038
Crespo, 2008, Ion-Selective Electrodes Using Carbon Nanotubes as Ion-to-Electron Transducers, Anal Chem, 80, 1316, 10.1021/ac071156l
Ampurdanés, 2009, Determination of choline and derivatives with a solid-contact ion-selective electrode based on octaamide cavitand and carbon nanotubes, Biosens Bioelectron, 25, 344, 10.1016/j.bios.2009.07.006
Hernández, 2010, Determination of Calcium Ion in Sap Using Carbon Nanotube-based Ion-Selective Electrodes, Analyst, 135, 1979, 10.1039/c0an00148a
Song, 2015, A Solid-Contact Pb2+-Selective Electrode with Carbon Nanotubes by Electrodeposition as Ion-To-Electron Transducer, Electrochem, 83, 402, 10.5796/electrochemistry.83.402
Sakač, 2017, Determination of Anionic Surfactants in Real Samples Using a Low-Cost and High Sensitive Solid Contact Surfactant Sensor with MWCNTs as the Ion-to-Electron Transducer, Anal Methods, 9, 2305, 10.1039/C7AY00099E
Parra, 2009, Ion-Selective Electrodes Using Multi-Walled Carbon Nanotubes as Ion-to-Electron Transducers for the Detection of Perchlorate, Analyst, 134, 1905, 10.1039/b908224g
Hajduković, 2017, A Functionalized Nanomaterial based, New, Solid State Cationic-Surfactant-Selective Sensor with Fast Response and Low Noise, Sens Actuators B, 251, 795, 10.1016/j.snb.2017.05.067
Jaworska, 2014, Spray-Coated All-Solid-State Potentiometric Sensors, Analyst, 139, 6010, 10.1039/C4AN01277A
Guo, 2012, Micro Solid-Contact Ion-Selective Electrode Using a Carbon Nanotube Tower as Ion-to-Electron Transducer and Conductive Substrate, Electroanalysis, 24, 2045, 10.1002/elan.201200348
Jaworska, 2016, Optimizing Carbon Nanotubes Dispersing Agents from the Point of View of Ion-selective Membrane Based Sensors Performance-Introducing Carboxymethylcellulose as Dispersing Agent for Carbon Nanotubes Based Solid Contacts, Electroanalysis, 28, 947, 10.1002/elan.201500609
Mousavi, 2009, Poly(3,4-Ethylenedioxythiophene)(PEDOT) Doped with Carbon Nanotubes as Ion-to-Electron Transducer in Polymer Membrane-Based Potassium Ion-Selective Electrodes, J Electroanal Chem, 633, 246, 10.1016/j.jelechem.2009.06.005
Lenik, 2018, Construction of a glassy carbon ibuprofen electrode modified with multi-walled carbon nanotubes and cyclodextrins, Sens Actuators B, 255, 2282, 10.1016/j.snb.2017.09.034
Abbaspour, 2007, Carbon Nanotube Composite Coated Platinum Electrode for Detection of Cr(III) in Real Samples, Talanta, 71, 887, 10.1016/j.talanta.2006.05.085
Abbaspour, 2011, Carbon Nanotube Composite Coated Platinum Electrode for Detection of Ga(III), J Hazard Mater, 185, 101, 10.1016/j.jhazmat.2010.09.002
Ghaedi, 2011, Influence of multiwalled carbon nanotubes on the response performance of carbon paste iodide ion selective electrode based on iron (II) phthalocyanine, Int J Electrochem Sci, 6, 6074, 10.1016/S1452-3981(23)19663-5
Mousavi, 2011, Comparison of Multi-Walled Carbon Nanotubes and Poly(3-Octylthiophene) as Ion-to-Electron Transducers in All-Solid-State Potassium Ion-Selective Electrodes, Electroanalysis, 23, 1352, 10.1002/elan.201000747
Mahmoud, 2015, Carbon Nanotubes Versus Polyaniline Nanoparticles; Which Transducer Offers More Opportunities for Designing a Stable Solid Contact Ion-Selective Electrode, J Electroanal Chem, 755, 122, 10.1016/j.jelechem.2015.07.045
Hussein, 2017, Stable Glycopyrronium Bromide Solid Contact Ion Selective Potentiometric Sensors Using Multi-Walled Carbon Nanotubes Polyaniline Nanoparticles and Polyaniline Microparticles as Ion-to-Electron Transducers: A comparative study, Sens Actuators B, 247, 436, 10.1016/j.snb.2017.03.021
Yuan, 2015, All-Solid-State Potentiometric Sensors with a Multiwalled Carbon Nanotube Inner Transducing Layer for Anion Detection in Environmental Samples, Anal Chem, 87, 8640, 10.1021/acs.analchem.5b01941
Rius-Ruiz, 2011, Potentiometric Strip Cell Based on Carbon Nanotubes as Transducer Layer: Toward Low-Cost Decentralized Measurements, Anal Chem, 83, 8810, 10.1021/ac202070r
Novoselov, 2004, Electric Field Effect in Atomically Thin Carbon Films, Science, 306, 666, 10.1126/science.1102896
Geim, 2007, The Rise of Graphene, Nat Mater, 6, 183, 10.1038/nmat1849
Yang, 2017, Ultrafast Delamination of Graphite into High-Quality Graphene Using Alternating Currents, Angew Chem Int Ed, 56, 6669, 10.1002/anie.201702076
Strauss, 2018, A Simple Route to Porous Graphene from Carbon Nanodots for Supercapacitor Applications, Adv Mater, 30, 1704449, 10.1002/adma.201704449
Sun, 2017, Three-dimensional holey-graphene/niobia composite architectures for ultrahigh-rate energy storage, Science, 356, 599, 10.1126/science.aam5852
Li, 2016, Efficient Preparation and Characterization of Functional Graphene with Versatile Applicability, J Harbin Inst Technol (New Series), 23, 1
Chen, 2013, Graphene Materials for Electrochemical Capacitors, J Phys Chem Lett, 4, 1244, 10.1021/jz400160k
Xie, 2020, Review: Layer-Number Controllable Preparation of High-Quality Graphene for Wide Applications, J Harbin Inst Technol (New Series), 27, 136
Qin, 2018, A Top-Down Strategy toward SnSb In-Plane Nanoconfined 3D N-Doped Porous Graphene Composite Microspheres for High Performance Na-Ion Battery Anode, Adv Mater, 30, 1704670, 10.1002/adma.201704670
Huang, 2018, Three-dimensional sandwich-structured NiMn2O4@reduced graphene oxide nanocomposites for highly reversible Li-ion battery anodes, J Power Sources, 378, 677, 10.1016/j.jpowsour.2018.01.029
Smith, 2018, Negative Differential Resistance and Steep Switching in Chevron Graphene Nanoribbon Field-Effect Transistors, IEEE Electron Device Lett, 39, 143, 10.1109/LED.2017.2772865
Llinas, 2018, Field-effect transistors with parallel arrays of atomically precise graphene nanoribbons, Bull Am Phys Soc
Zhan, 2016, Determination of lead (II) by adsorptive stripping voltammetry using a glassy carbon electrode modified with β-cyclodextrin and chemically reduced graphene oxide composite, Microchim Acta, 183, 1169, 10.1007/s00604-016-1754-2
Ali, 2017, In situ integration of graphene foam–titanium nitride based bio-scaffolds and microfluidic structures for soil nutrient sensors, Lab Chip, 17, 274, 10.1039/C6LC01266C
Yu, 2016, Highly sensitive electrochemical determination of sulfate in PM 2.5 based on the formation of heteropoly blue at poly-l-lysine-functionalized graphene modified glassy carbon electrode in the presence of cetyltrimethylammonium bromide, Chem Eng J, 294, 122, 10.1016/j.cej.2016.02.063
Song, 2016, Recent Advances in Electrochemical Biosensors Based on Graphene Two-Dimensional Nanomaterials, Biosens Bioelectron, 76, 195, 10.1016/j.bios.2015.07.002
Xu, 2017, Nanocomposites of Graphene and Graphene Oxides: Synthesis Molecular Functionalization and Application in Electrochemical Sensors and Biosensors. A review, Microchim Acta, 184, 1, 10.1007/s00604-016-2007-0
Cinti, 2017, Graphene-Based Screen-Printed Electrochemical (Bio)sensors and Their Applications: Efforts and Criticisms, Biosens Bioelectron, 89, 107, 10.1016/j.bios.2016.07.005
Zhu, 2017, An Overview of Carbon Nanotubes and Graphene for Biosensing Applications, Nano-Micro Lett, 9, 25, 10.1007/s40820-017-0128-6
Li, 2008, Processable Aqueous Dispersions of Graphene Nanosheets, Nat Nanotechnol, 3, 101, 10.1038/nnano.2007.451
Li, 2012, All-Solid-State Potassium-Selective Electrode Using Graphene as the Solid Contact, Analyst, 137, 618, 10.1039/C1AN15705A
Ping, 2011, Development of an All-Solid-State Potassium Ion-Selective Electrode Using Graphene as the Solid-Contact Transducer, Electrochem Commun, 13, 1529, 10.1016/j.elecom.2011.10.018
Liu, 2020, Thiol-functionalized reduced graphene oxide as self-assembled ion-to-electron transducer for durable solid-contact ion-selective electrodes, Talanta, 208, 10.1016/j.talanta.2019.120374
Tang, 2012, All-Solid-State Nitrate-Selective Electrode and its Application in Drinking Water, Electrochim Acta, 81, 186, 10.1016/j.electacta.2012.07.073
Hernández, 2012, Reduced Graphene Oxide Films as Solid Transducers in Potentiometric All-Solid-State Ion-Selective Electrodes, J Phys Chem C, 116, 22570, 10.1021/jp306234u
Liang, 2015, A Simple Approach for Fabricating Solid-Contact Ion-Selective Electrodes Using Nanomaterials as Transducers, Anal Chim Acta, 853, 291, 10.1016/j.aca.2014.10.033
Ganjali, 2015, All Solid State Graphene Based Potentiometric Sensors for Monitoring of Mercury Ions in Waste Water Samples, Int J Environ Res, 9, 333
Ping, 2012, Application of Electrochemically Reduced Graphene Oxide on Screen-Printed Ion-Selective Electrode, Anal Chem, 84, 3473, 10.1021/ac203480z
Pu, 2016, Preparation and Evaluation of a Stable Solid State Ion Selective Electrode of Polypyrrole/Electrochemically Reduced Graphene/Glassy Carbon Substrate for Soil Nitrate Sensing, Int J Electrochem Sci, 11, 4779, 10.20964/2016.06.7
Li, 2020, An integrated all-solid-state screen-printed potentiometric sensor based on a three-dimensional self-assembled graphene aerogel, Microchem J, 159, 10.1016/j.microc.2020.105453
Shvedene, 2015, Reduced Graphene Oxide in the Construction of Solid-State Bromide-Selective Electrode, J Anal Chem, 70, 378, 10.1134/S1061934815030193
Zhou, 2009, Controlled Synthesis of Large-Area and Patterned Electrochemically Reduced Graphene Oxide Films, Chem Eur J, 15, 6116, 10.1002/chem.200900596
Guo, 2009, A Green Approach to the Synthesis of Graphene Nanosheets, ACS Nano, 3, 2653, 10.1021/nn900227d
Xia, 2009, Measurement of the Quantum Capacitance of Graphene, Nat Nanotechnol, 4, 505, 10.1038/nnano.2009.177
El-Kady, 2012, Laser Scribing of High-Performance and Flexible Graphene-Based Electrochemical Capacitors, Science, 335, 1326, 10.1126/science.1216744
Vivekchand, 2008, Graphene-Based Electrochemical Supercapacitors, J Chem Sci, 120, 9, 10.1007/s12039-008-0002-7
Stoller, 2008, Graphene-Based Ultracapacitors, Nano Lett, 8, 3498, 10.1021/nl802558y
Collins, 2011, Claisen Rearrangement of Graphite Oxide: A Route to Covalently Functionalized Graphenes, Angew Chem Int Ed, 50, 8848, 10.1002/anie.201101371
Jaworska, 2012, Critical Assessment of Graphene as Ion-to-Electron Transducer for All-Solid-State Potentiometric Sensors, Talanta, 97, 414, 10.1016/j.talanta.2012.04.054
Huang, 2013, Layered MoS2–Graphene Composites for Supercapacitor Applications with Enhanced Capacitive Performance, Int J Hydrogen Energy, 38, 14027, 10.1016/j.ijhydene.2013.08.112
Bissett, 2015, Characterization of MoS2-Graphene Composites for High-Performance Coin Cell Supercapacitors, ACS Appl Mater Interfaces, 7, 17388, 10.1021/acsami.5b04672
Toth, 2016, Asymmetric MoS2/Graphene/Metal Sandwiches: Preparation, Characterization, and Application, Adv Mater, 28, 8256, 10.1002/adma.201600484
Yang, 2017, Atomic-level molybdenum oxide nanorings with full-spectrum absorption and photoresponsive properties, Nat Commun, 8, 1559, 10.1038/s41467-017-00850-8
Kang, 2017, Strain-Gradient Effect in Gas Sensors Based on Three-Dimensional Hollow Molybdenum Disulfide Nanoflakes, ACS Appl Mater Interfaces, 9, 43799, 10.1021/acsami.7b14262
Zhuang, 2018, Three-dimensional molybdenum disulfide/graphene hydrogel with tunable heterointerfaces for high selective Hg(II) scavenging, J Colloid Interface Sci, 514, 715, 10.1016/j.jcis.2017.12.082
Ma, 2017, Growth of Worm-Like and Flower-Like Molybdenum Disulfide on Graphene Nanosheets for Sensitive Determination of Dopamine, Int J Electrochem Sci, 12, 7365, 10.20964/2017.08.48
Zeng, 2017, A solid-contact potassium-selective electrode with MoO2 microspheres as ion-to-electron transducer, Anal Chim Acta, 982, 72, 10.1016/j.aca.2017.05.032
Zeng, 2016, Solid-contact K+-Selective Electrode Based on Three-Dimensional Molybdenum Sulfide Nanoflowers as Ion-to-Electron Transducer, Sens Actuators B, 234, 80, 10.1016/j.snb.2016.04.153
Brent, 2014, Productionof few-layer phosphorene by liquid exfoliation of black phosphorus, Chem Commun, 50, 13338, 10.1039/C4CC05752J
Zhuge, 2019, Functionalized black phosphorus nanocomposite for biosensing, ChemElectroChem, 6, 1129, 10.1002/celc.201801439
Li, 2021, Recent advances in black phosphorus-based electrochemical sensors: a review, Anal Chim Acta, 1170, 10.1016/j.aca.2021.338480
Kou, 2017, Solid-contact Ca2+-selective electrodes based on two-dimensional black phosphorus as ion-to- electron transducers, RSC Adv, 7, 43905, 10.1039/C7RA07743B
Shao, 2019, Two-dimensional MXene nanosheets (types Ti3C2Tx and Ti2CTx) as new ion-to-electron transducers in solid-contact calcium ion-selective electrodes, Microchim Acta, 186, 750, 10.1007/s00604-019-3878-7
Mendecki, 2018, Conductive metal–organic frameworks as ion-to-electron transducers in potentiometric sensors, ACS Appl Mater Interfaces, 10, 19248, 10.1021/acsami.8b03956
Qiu, 2019, Recent advances in the rational synthesis and sensing applications of metal-organic framework biocomposites, Coord Chem Rev, 387, 60, 10.1016/j.ccr.2019.02.009
Lenar, 2019, Ruthenium dioxide nanoparticles as a high-capacity transducer in solid-contact polymer membrane-based pH-selective electrodes, Microchim Acta, 186, 777, 10.1007/s00604-019-3830-x
Lenar, 2019, Ruthenium dioxide as high-capacitance solid-contact layer in K+ -selective electrodes based on polymer membrane, J Electrochem Soc, 166, 1470, 10.1149/2.0481915jes
Lenar, 2019, Poly(3-octylthiophene-2,5-diyl)-Nanosized ruthenium dioxide composite material as solid-contact layer in polymer membrane-based K+-selective electrodes, Electrochim Acta, 322, 134718, 10.1016/j.electacta.2019.134718
Lenar, 2021, Potentiometric Sensor with High Capacity Composite Composed of Ruthenium Dioxide and Poly(3,4-ethylenedioxythiophene) Polystyrene Sulfonate, Materials, 14, 1891, 10.3390/ma14081891
Lenar, 2021, High Capacity Nanocomposite Layers Based on Nanoparticles of Carbon Materials and Ruthenium Dioxide for Potassium Sensitive Electrode, Materials, 14, 1308, 10.3390/ma14051308
Al-Hardan, 2021, Calcium ion-selective electrode based on the facile synthesis of CuO over Cu wires, J Mater Sci Mater Electron, 32, 20240, 10.1007/s10854-021-06527-9
Maksymiuk, 2020, Unintended Changes of Ion-Selective Membranes Composition—Origin and Effect on Analytical Performance, Membranes, 10, 266, 10.3390/membranes10100266
Belyustin, 1992, Glass electrodes: a new generation, Sens Actuators B, 10, 61, 10.1016/0925-4005(92)80012-M
Vlasov, 1979, Lead-selective electrodes based on lead and silver sulfides, J Anal Chem USSR, 34, 1175
Vlasov, 1987, Ion-selective chalcogenide glass electrodes, Ion-selective Electrode Rev, 9, 5