Behavior of ultra-high performance fiber reinforced concrete columns under pure axial loading

Bache HH. Compact reinforced composite: basic principles. CBL report no. 41, Aalborg Portland, Aalborg; 1987. 87 p. Aarup, 1998, Fiber reinforced high performance concrete for precast applications, 113 Graybeal BA. Material property characterization of ultra-high performance concrete. Report no. FHWA-HRT-06-103. U.S. Department of Transportation; 2006. 176 p. Graybeal, 2007, Compressive behaviour of ultra-high performance fiber reinforced concrete, ACI Mater J, 104, 146 Nielsen C. Ultra high strength steel fiber reinforced concrete – Part I. Report no. 323. Kongens Lyngby: Technical University of Denmark; 1995. 187 p. Aarup, 2005, Slender CRC columns, Nordic Concr Res, 80 Heimann, 2013, Reliability of heavily loaded compression members of UHPC (in German), Concr Reinf Concr, 108, 2 Empelmann M, Teutsch M, Steven G. Load bearing behaviour of UHPFRC columns (in German). Report KaF-2008-20. Institut für Baustoffe, Massivbau und Brandschutz (iBMB), Technischen Universität Braunschweig; 2008. 2 p. Redaelli, 2014, Experimental and numerical study on the use of high-strength and ultra-high performance fiber reinforced concrete in columns, 1 Zohrevand, 2011, Behavior of ultrahigh-performance concrete confined by fiber-reinforced polymers, ASCE J Struct Eng, 23, 1727 Guler, 2013, Axial capacity and ductility of circular UHPC-filled steel tube columns, Mag Concr Res, 65, 898, 10.1680/macr.12.00211 Heshe G, Nielsen CV. Subtask 1.4 – behaviour in compression, triaxial stress state and short columns. Report EU264-Compressit Aalborg Portland, Aalborg; 1992. 51 p. Sugano, 2007, Study of new RC structures using ultra-high-strength fibre-reinforced concrete (UFC) – the challenge of applying 200MPa UFC to earthquake resistant building structures, J Adv Concr Technol, 5, 133, 10.3151/jact.5.133 Steven, 2014, UHPFRC-columns with high-strength longitudinal reinforcement (in German), Concr Reinf Concr, 109, 344 Empelmann, 2008, Expanding the application range of RC columns by the use of UHPC, 461 CSA. CSA A23.3-14 – design of concrete structures. Mississauga: Canadian Standards Association; 2014. Bonneau, 1997, Mechanical properties and durability of two industrial reactive powder concretes, ACI Mater J, 94, 286 ASTM. ASTM C1609/C1609M-12. Standard test method for flexural performance of fibre-reinforced concrete (using beam with third-point loading). West Conshohocken. ASTM International; 2010. 9 p. Yalcin, 2000, Inelastic analysis of reinforced concrete columns, Comput Struct, 77, 539, 10.1016/S0045-7949(99)00228-X ACI Committee 318. ACI 318-11 – building code requirements for structural concrete. Farmington Hills: American Concrete Institute; 2011. Mander, 1988, Theoretical stress–strain model for confined concrete, ASCE J Struct Eng, 114, 1804, 10.1061/(ASCE)0733-9445(1988)114:8(1804) Razvi, 1999, Confinement model for high strength concrete, ASCE J Struct Eng, 125, 281, 10.1061/(ASCE)0733-9445(1999)125:3(281) Aoude H. Structural behaviour of steel fiber reinforced concrete members. PhD thesis. Montreal: Department of Civil Engineering: McGill University; 2008. 269 p. Cusson, 1995, Stress–strain model for confined high strength concrete, ASCE J Struct Eng, 121, 468, 10.1061/(ASCE)0733-9445(1995)121:3(468) Légeron, 2003, Uniaxial confinement model for normal and high strength concrete columns, ASCE J Struct Eng, 129, 241, 10.1061/(ASCE)0733-9445(2003)129:2(241) Sheikh, 1982, Analytical model for concrete confinement in tied columns, ASCE J Struct Div, 108, 2703, 10.1061/JSDEAG.0006100 Popovics, 1973, A numerical approach to the complete stress–strain curve of concrete, Cem Concr Res, 3, 583, 10.1016/0008-8846(73)90096-3