A literature review of the association between wear rate and osteolysis in total hip arthroplasty

Harris, 1995, The problem is osteolysis, Clin Orthop, 311, 46 Klapperich, 1999, Failure of a metal-on-metal total hip arthroplasty from progressive osteolysis, J Arthroplasty, 14, 877, 10.1016/S0883-5403(99)90042-6 Yoon, 1998, Osteolysis in association with a total hip arthroplasty with ceramic bearing surfaces, J Bone Joint Surg Am, 80, 1459, 10.2106/00004623-199810000-00007 Willert, 1990, Osteolysis in alloarthroplasty of the hip: the role of bone cement fragmentation, Clin Orthop, 258, 108, 10.1097/00003086-199009000-00014 Kobayashi, 1997, Number of polyethylene particles and osteolysis in total joint replacements, J Bone Joint Surg Br, 79, 844, 10.1302/0301-620X.79B5.7602 Dowd, 2000, Characterization of long-term femoral head penetration rates: association with and prediction of ostcolysis, J Bone Joint Surg Am, 82, 1102, 10.2106/00004623-200008000-00006 Livingston, 1997, Complications of total hip arthroplasty associated with the use of an acetabular component with a Hylamer liner, J Bone Joint Surg Am, 79, 1529, 10.2106/00004623-199710000-00010 Sun, 1997, Correlations between oxidation, crosslinking, and wear performance of UHMWPE McKellop, 1999, Development of an extremely wear-resistant ultra high molecular weight polyethylene for total hip replacements, J Orthop Res, 17, 157, 10.1002/jor.1100170203 Rubash, 1999, A new classification system for the management of acetabular osteolysis after total hip arthroplasty, Instr Course Lect, 48, 37 Haddad, 2000, Femoral bone loss in total hip arthroplasty: classification and preoperative planning, Instr Course Lect, 49, 83 Campbell, 1999, Acetabular bone loss during revision total hip replacement: preoperative investigation and planning, Instr Course Lect, 48, 43 Soto, 2000, Clinical and radiographic evaluation of the Harris-Galante cup: incidence of wear and osteolysis at 7 to 9 years follow-up, J Arthroplasty, 15, 139, 10.1016/S0883-5403(00)90022-6 Schmalzried, 1999, The role of acetabular component screw holes and/or screws in the development of pelvic osteolysis, Proc Inst Mech Eng, 213, 147, 10.1243/0954411991534861 Goodman, 1998, Cellular profile and cytokine production at prosthetic interfaces: study of tissues retrieved from revised hip and knee replacements, J Bone Joint Surg Br, 80, 531, 10.1302/0301-620X.80B3.8158 Zicat, 1995, Patterns of osteolysis around total hip components inserted with and without cement, J Bone Joint Surg Am, 77, 432, 10.2106/00004623-199503000-00013 Dumbleton, 1981 Kabo, 1993, In vivo wear of polyethylene acetabular components, J Bone Joint Surg Br, 75, 254, 10.1302/0301-620X.75B2.8444946 Griffith, 1978, Socket wear in Charnley low friction arthroplasty of the hip, Clin Orthop, 137, 37 Charnley, 1975, Rate of wear in total hip replacement, Clin Orthop, 112, 170, 10.1097/00003086-197510000-00021 Livermore, 1990, Effect of femoral head size on wear of the polyethylene acetabular component, J Bone Joint Surg Am, 72, 518, 10.2106/00004623-199072040-00008 Devane, 1999, Assessment of polyethylene wear in total hip replacement, Clin Orthop, 369, 59, 10.1097/00003086-199912000-00007 Pederson, 1998, Prediction of long-term polyethylene wear in total hip arthroplasty based on early wear measurements made using digital analysis, J Orthop Res, 16, 557, 10.1002/jor.1100160506 Devane, 1993, The measurement of polyethylene wear in metal-backed acetabular components Martell, 1997, Determination of polyethylene wear in total hip replacements with use of digital radiographs, J Bone Joint Surg Am, 79, 1635, 10.2106/00004623-199711000-00004 Collier, 2001, An in vitro analysis of the reproductivity and accuracy of two computer-aided methods for radiographically assessing acetabular component wear after total hip arthroplasty, Trans Orthop Res Soc, 26, 164 Devane, 1995, Measurement of polyethylene wear in metal-backed acetabular cups: three dimensional technique, Clin Orthop, 319, 303 Yamaguchi, 1997, Three-dimensional analysis of multiple wear vectors in retrieved acetabular cups, J Bone Joint Surg Am, 79, 1539, 10.2106/00004623-199710000-00011 Sychterz, 1999, Two-dimensional versus three-dimensional radiographic measurements of polyethylene, Clin Orthop, 365, 117, 10.1097/00003086-199908000-00016 Martell, 2000, The performance of 2D vs. 3D computerized wear analysis in the Harris Galante acetabular component Smith, 1999, The influence of weight-bearing on the measurement of polyethylene wear in THA, Clin Orthop, 81, 259 Martell, 2000, The effect of joint loading on acetabular wear measurement in total hip arthroplasty, J Arthroplasty, 15, 512, 10.1054/arth.2000.4336 Schmalzried, 1998, The multifactorial nature of polyethylene wear in-vivo, J Bone Joint Surg Am, 80, 1234, 10.2106/00004623-199808000-00018 Lewis, 2000, Design issues in clinical studies of the in vivo volumetric wear rate of polyethylene bearing components, J Bone Joint Surg Am, 82, 281, 10.2106/00004623-200002000-00012 Polineni, 1997, Effect of sterilization methods on the wear behavior of UHMWPE acetabular components—a hip joint wear simulator study Campbell, 1996, Wear and morphology of ultra-high molecular weight polyethylene wear particles from total hip replacements, Proc Inst Mech Eng, 210, 167, 10.1243/PIME_PROC_1996_210_409_02 Green, 1998, Polyethylene particles of a “critical size” are necessary for the induction of cytokines by macrophages in vitro, Biomaterials, 19, 2297, 10.1016/S0142-9612(98)00140-9 Hall, 1996, Wear in retrieved Charnley acetabular sockets, Proc Inst Mech Eng, 210, 197, 10.1243/PIME_PROC_1996_210_413_02 Sochart, 1999, Relationship of acetabular wear to osteolysis around total hip components inserted with and without cement, Clin Orthop, 363, 135, 10.1097/00003086-199906000-00018 Callaghan, 2000, Charnley total hip arthroplasty with cement: minimum twenty-five year follow-up, J Bone Joint Surg Am, 82, 487, 10.2106/00004623-200004000-00004 Sakalkale, 1999, Minimum 10-year results of a tapered cementless hip replacement, Clin Orthop, 362, 138, 10.1097/00003086-199905000-00022 Shih, 1997, Measurement of polyethylene wear in cementless total hip arthroplasty, J Bone Joint Surg Br, 79, 361, 10.1302/0301-620X.79B3.6630 Devane, 1997, Measurement of polyethylene wear in acetabular components inserted with and without cement, J Bone Joint Surg Am, 79, 682, 10.2106/00004623-199705000-00007 Kim, 1999, Primary total hip arthroplasty with the AML total hip prosthesis, Clin Orthop, 360, 147, 10.1097/00003086-199903000-00018 Barrack, 1997, Pelvic lysis and polyethylene wear at 5–8 years in an uncemented total hip, Clin Orthop, 335, 211, 10.1097/00003086-199702000-00020 Wan, 1996, Natural history of femoral focal osteolysis with proximal ingrowth smooth stem implant, J Arthroplasty, 11, 718, 10.1016/S0883-5403(96)80011-8 Han, 1999, Effect of polyethylene wear on osteolysis in cementless primary total hip arthroplasty, J Arthroplasty, 14, 714, 10.1016/S0883-5403(99)90227-9 Maloney, 1999, Fixation, polyethylene wear and pelvic osteolysis in primary total hip replacement, Clin Orthop, 369, 157, 10.1097/00003086-199912000-00016 Perez, 1998, Polyethylene wear and periprosthetic osteolysis in metal-backed acetabular components with cylindrical liners, J Arthroplasty, 13, 1, 10.1016/S0883-5403(98)90068-7 Sychterz, 2000, Comparison of in vivo wear between polyethylene liners articulating with ceramic and cobalt-chrome femoral heads, J Bone Joint Surg Br, 82, 948, 10.1302/0301-620X.82B7.9885 Yamaguchi, 1999, Deformation of the acetabular polyethylene liner and the backside gap, J Arthroplasty, 14, 464, 10.1016/S0883-5403(99)90102-X Kim, 1999, Primary total hip arthroplasty with a cementless porous-coated anatomic total hip prosthesis: 10–12 year results of a prospective and consecutive series, J Arthroplasty, 14, 538, 10.1016/S0883-5403(99)90074-8 Graeter, 1998, Early osteolysis with Hylamer acetabular liners, J Arthroplasty, 13, 464, 10.1016/S0883-5403(98)90016-X Nashed, 1995, Are cementless acetabular components the cause of excess wear and osteolysis in total hip arthroplasty, Clin Orthop, 317, 19 Goodman, 1998, In vitro, in vivo, and tissue retrieval studies on particulate debris, Clin Orthop, 352, 25, 10.1097/00003086-199807000-00005 Goodman, 1997, Loosening and osteolysis of cemented joint arthroplasties, Clin Orthop, 337, 149, 10.1097/00003086-199704000-00017 van der Vis, 1998, Short periods of oscillating fluid pressure directed at a titanium-bone interface in rabbits lead to bone lysis, Acta Orthop Scand, 69, 5, 10.3109/17453679809002345 Schmalzried, 1992, Periprosthetic bone loss in total hip arthroplasty: the role of polyethylene wear debris and the concept of the effective joint space, J Bone Joint Surg Am, 74, 849, 10.2106/00004623-199274060-00006 Kadoya, 1998, Wear and osteolysis in total joint replacements, Acta Orthop Scand, 278, 1 Astion, 1996, The porous-coated anatomic total hip prosthesis: failure of the metal-backed acetabular component, J Bone Joint Surg Am, 78, 755, 10.2106/00004623-199605000-00016 Manley, 1998, Fixation of acetabular cups without cement in total hip arthroplasty: a comparison of three different implant surfaces at a minimum duration of follow-up of five years, J Bone Joint Surg Am, 80, 1175, 10.2106/00004623-199808000-00011 Capello, 1997, Hydroxyapatite-coated total hip femoral components in patients less than fifty years old: clinical and radiographic results after five to eight years of follow-up, J Bone Joint Surg Am, 79, 1023, 10.2106/00004623-199707000-00008 Scott, 2000, Factors contributing to rapid wear and osteolysis in hips with modular acetabular bearings made of hylamer, J Arthroplasty, 15, 35, 10.1016/S0883-5403(00)91103-3 Bauer, 1999, The pathology of total joint arthroplasty: II. mechanisms of implant failure, Skeletal Radiol, 28, 483, 10.1007/s002560050552 Kurtz, 1999, Simulation of initial frontside and backside wear rates in modular acetabular component with multiple screw holes, J Biomech, 32, 967, 10.1016/S0021-9290(99)00043-3 Oonishi, 1995, Long term clinical results of THR: clinical results of THR of an alumina head with a cross-linked UHMWPE cup, Orthop Surg Traum, 38, 1255 Grobbelaar, 1978, The radiation improvement of polyethylene prostheses: a preliminary study, J Bone Joint Surg Br, 60, 370, 10.1302/0301-620X.60B3.681412 Wroblewski, 1996, Prospective clinical and joint simulator studies of a new total hip arthroplasty using alumina ceramic heads and cross-linked polyethylene cups, J Bone Joint Surg Br, 78, 280, 10.1302/0301-620X.78B2.0780280 Chen, 1996, An algorithm for estimating the accuracy of polyethylene wear, J Orthop Surg, 13, 59, 10.1186/s13018-018-0762-9 Dorr, 1995, Ten years of experience with porous acetabular components for revision surgery, Clin Orthop, 319, 191 Sychterz, 1997, Radiographic evaluation of penetration by the femoral head into the polyethylene liner over time, J Bone Joint Surg Am, 79, 1040, 10.2106/00004623-199707000-00010