Investigation on the effects of front-cavity on flame location and thermal performance of a cylindrical micro combustor
Tài liệu tham khảo
Chia, 2007, The development of a micropower (micro-thermophotovoltaic) device, J. Power Sources, 165, 455, 10.1016/j.jpowsour.2006.12.006
Alipoor, 2016, Asymmetric hydrogen flame in a heated micro-channel: role of Darrieus-Landau and thermal-diffusive instabilities, Int. J. Hydrogen Energy, 41, 20407, 10.1016/j.ijhydene.2016.09.099
Ju, 2011, Microscale combustion: technology development and fundamental research, Prog. Energy Combust. Sci., 37, 669, 10.1016/j.pecs.2011.03.001
Ganji, 2013, Numerical estimation of blowout, flashback, and flame position in MIT micro gas-turbine chamber, Chem. Eng. Sci., 104, 857, 10.1016/j.ces.2013.09.056
E, 2016, Numerical investigation on hydrogen/air non-premixed combustion in a three-dimensional micro combustor, Energy Convers. Manage., 124, 427, 10.1016/j.enconman.2016.07.048
Khu, 2011, Effect of finite heat input on the power performance of micro heat engines, Energy, 36, 2686, 10.1016/j.energy.2011.02.009
Jiang, 2017, Refractory material based frequency selective emitters/absorbers for high efficiency and thermal stable thermophotovoltaics, Sol. Energy Mater. Sol. Cells, 163, 98, 10.1016/j.solmat.2017.01.022
Jiménez, 2017, Propagation of symmetric and non-symmetric lean hydrogen–air flames in narrow channels: influence of heat losses, Proc. Combust. Inst., 36, 559, 10.1016/j.proci.2016.06.066
Rana, 2017, Prediction of flame speed and exergy analysis of premixed flame in a heat recirculating cylindrical micro combustor, Energy, 126, 658, 10.1016/j.energy.2017.03.063
Li, 2017, Stability study of a nonlinear thermoacoustic combustor: effects of time delay, acoustic loss and combustion-flow interaction index, Appl. Energy, 199, 217, 10.1016/j.apenergy.2017.04.074
Wang, 2011, Instability of flame in micro combustor under different external thermal environment, Exp. Therm. Fluid Sci., 35, 1451, 10.1016/j.expthermflusci.2011.06.003
Stazio, 2016, Combustion in micro-channels with a controlled temperature gradient, Exp. Therm. Fluid Sci., 73, 79, 10.1016/j.expthermflusci.2015.09.020
Wan, 2014, A numerical investigation on combustion characteristics of H2/air mixture in a micro combustor with wall cavities, Int. J. Hydrogen Energy, 39, 8138, 10.1016/j.ijhydene.2014.03.116
Su, 2015, Numerical investigation of a novel micro combustor with double-cavity for micro-thermophotovoltaic system, Energy Convers. Manage., 106, 173, 10.1016/j.enconman.2015.09.043
Ran, 2015, Numerical investigations on characteristics of methane catalytic combustion in micro-channels with a concave or convex wall cavity, Energy Convers. Manage., 97, 188, 10.1016/j.enconman.2015.03.058
Pan, 2017, Experimental study on premixed methane-air catalytic combustion in rectangular micro channel, Appl. Therm. Eng., 117, 1, 10.1016/j.applthermaleng.2017.02.008
Lu, 2016, Hetero-/homogeneous combustion of premixed hydrogen-oxygen mixture in a micro-reactor with catalyst segmentation, Int. J. Hydrogen Energy, 41, 12387, 10.1016/j.ijhydene.2016.06.043
Peng, 2018, Investigations on effects of wall thickness and porous media on the thermal performance of a non-premixed hydrogen fueled cylindrical micro combustor, Energy Convers. Manage., 155, 276, 10.1016/j.enconman.2017.10.095
Pan, 2015, Hydrogen/oxygen premixed combustion characteristics in micro porous media combustor, Appl. Energy, 160, 802, 10.1016/j.apenergy.2014.12.049
Zhao, 2015, Effect of choked outlet on transient energy growth analysis of a thermoacoustic system, Appl. Energy, 160, 502, 10.1016/j.apenergy.2015.09.078
Zhao, 2015, Numerical investigation of the effect of distributed heat sources on heat-to-sound conversion in a T-shaped thermoacoustic system, Appl. Energy, 144, 204, 10.1016/j.apenergy.2015.01.091
E, 2016, Field synergy analysis of the micro-cylindrical combustor with a step, Appl. Therm. Eng., 93, 83, 10.1016/j.applthermaleng.2015.09.028
Zhao, 2016, Entropy-involved energy measure study of intrinsic thermoacoustic oscillations, Appl. Energy, 177, 570, 10.1016/j.apenergy.2016.05.142
Bagheri, 2014, Effects of bluff body shape on the flame stability in premixed micro-combustion of hydrogen-air mixture, Appl. Therm. Eng., 67, 266, 10.1016/j.applthermaleng.2014.03.040
Hosseini, 2014, Investigation of bluff-body micro-flameless combustion, Energy Convers. Manage., 88, 120, 10.1016/j.enconman.2014.08.023
Tang, 2015, Numerical study of premixed hydrogen/air combustion in a micro planar combustor with parallel separating plates, Int. J. Hydrogen Energy, 40, 2396, 10.1016/j.ijhydene.2014.12.018
Su, 2016, Numerical study on a multiple-channel micro combustor for a micro-thermophotovoltaic system, Energy Convers. Manage., 120, 197, 10.1016/j.enconman.2016.04.088
Yang, 2014, Development of micro- thermophotovoltaic power generator with heat recuperation, Energy Convers. Manage., 78, 81, 10.1016/j.enconman.2013.10.040
Rana, 2014, Thermodynamics of premixed combustion in a heat recirculating micro combustor, Energy, 68, 510, 10.1016/j.energy.2014.02.070
Wan, 2016, Effect of the length of a plate flame holder on flame blowout limit in a micro-combustor with preheating channels, Combust. Flame, 170, 53, 10.1016/j.combustflame.2016.05.015
Chen, 2017, Effect of heat recirculation on the combustion stability of methane-air mixtures in catalytic micro-combustors, Appl. Therm. Eng., 115, 702, 10.1016/j.applthermaleng.2017.01.031
Jiang, 2013, Entropy generation analysis of H2/air premixed flame in micro combustors with heat recuperation, Chem. Eng. Sci., 98, 265, 10.1016/j.ces.2013.05.038
Li, 2009, Development of 1D model for the analysis of heat transport in cylindrical micro combustors, Appl. Therm. Eng., 29, 1854, 10.1016/j.applthermaleng.2008.09.007
Bagheri, 2015, Impacts of inner/outer reactor heat recirculation on the characteristic of micro-scale combustion system, Energy Convers. Manage., 105, 45, 10.1016/j.enconman.2015.07.056
Yan, 2015, Numerical study of the geometrical parameters on CH4/air premixed combustion in heat recirculation micro combustor, Fuel, 159, 45, 10.1016/j.fuel.2015.06.069
Hossain, 2015, Thermal and chemical structures formed in the micro burner of miniaturized hydrogen-air jet flames, Proc. Combust. Inst., 35, 3413, 10.1016/j.proci.2014.08.008
Lee, 2008, Stability limits of premixed micro flames at elevated temperatures for portable fuel processing devices, Int. J. Hydrogen Energy, 33, 232, 10.1016/j.ijhydene.2007.08.029
Jiang, 2015, Development of a high-temperature and high-uniformity micro planar combustor for thermophotovoltaics application, Energy Convers. Manage., 103, 359, 10.1016/j.enconman.2015.06.083
Li, 2009, Characterization of wall temperature and radiation power through cylindrical dump micro-combustors, Combust. Flame, 156, 1587, 10.1016/j.combustflame.2009.05.003
Li, 2009, Study on premixed combustion in cylindrical micro combustors: transient flame behavior and wall heat flux, Exp. Therm. Fluid Sci., 33, 764, 10.1016/j.expthermflusci.2009.01.012
Pan, 2007, Effects of major parameters on micro-combustion for thermophotovoltaic energy conversion, Appl. Therm. Eng., 27, 1089, 10.1016/j.applthermaleng.2006.07.038
Jejurkar, 2010, Numerical characterization of a premixed flame based annular microcombustor, Int. J. Hydrogen Energy, 35, 9755, 10.1016/j.ijhydene.2010.06.017
Yang, 2015, Combustion process and entropy generation in a novel microcombustor with a block insert, Chem. Eng. J., 274, 231, 10.1016/j.cej.2015.04.034
Wan, 2015, Flame-anchoring mechanisms of a micro cavity-combustor for premixed H2/air flame, Chem. Eng. J., 275, 17, 10.1016/j.cej.2015.04.011
Saad, 2015, A three-dimensional computational model of H2–air premixed combustion in non-circular micro-channels for a thermo-photovoltaic (TPV) application, Appl. Energy, 152, 47, 10.1016/j.apenergy.2015.04.068
Li, 2017, Combustion characteristics of non-premixed methane micro-jet flame in coflow air and thermal interaction between flame and micro tube, Appl. Therm. Eng., 112, 296, 10.1016/j.applthermaleng.2016.10.082
Ferrari, 2014, Thermophotovoltaic energy conversion: Analytical aspects, prototypes and experiences, Appl. Energy, 113, 1717, 10.1016/j.apenergy.2013.08.064
Lei, 2016, Combustion and direct energy conversion inside a micro-combustor, Appl. Therm. Eng., 100, 348, 10.1016/j.applthermaleng.2016.01.162
Çengel, 2015
Xue, 2005, Microthermophotovoltaics power system for portable mems devices, Nanoscale Microscale Thermophys. Eng., 9, 85, 10.1080/10893950590913431
Yang, 2005, Effect of wall thickness of micro-combustor on the performance of micro-thermophotovoltaic power generators, Sens. Actuators A, 119, 441, 10.1016/j.sna.2004.10.005
Jiang, 2015, Entropy generation analysis of fuel lean premixed CO/H2/air flames, Int. J. Hydrogen Energy, 40, 5210, 10.1016/j.ijhydene.2015.02.082
Wang, 2016, Entropy generation analysis of fuel premixed CH4/H2/air flames using multistep kinetics, Int. J. Hydrogen Energy, 41, 20744, 10.1016/j.ijhydene.2016.08.103
Akhtar, 2017, Investigation of energy conversion and flame stability in a curved microcombustor for thermo-photovoltaic (TPV) applications, Appl. Energy, 192, 134, 10.1016/j.apenergy.2017.01.097
Ji, 2014, Nonorthogonality analysis of a thermoacoustic system with a premixed V-shaped flame, Energy Convers. Manage., 85, 102, 10.1016/j.enconman.2014.05.060
Chen, 2017, Numerical study of dynamic response of a jet diffusion flame to standing waves in a longitudinal tube, Appl. Therm. Eng., 112, 1070, 10.1016/j.applthermaleng.2016.10.152
Norton, 2004, A CFD study of propane/air microflame stability, Combust. Flame, 138, 97, 10.1016/j.combustflame.2004.04.004
Li, 2016, Fundamental flame characteristics of premixed H2-air combustion in a planar porous micro combustor, Chem. Eng. J., 283, 1187, 10.1016/j.cej.2015.08.056