A novel approach to model effects of surface roughness parameters on wear

Archard, 1953, Contact and rubbing of flat surfaces, J. Appl. Phys., 24, 981, 10.1063/1.1721448 Bowden, 1942, Mechanism of metallic friction, Nature, 150, 197, 10.1038/150197a0 Greenwood, 1996, Contact of nominally flat surfaces, Proc. R. Soc. A, 295, 300, 10.1098/rspa.1966.0242 Chang, 1987, An elastic–plastic model for the contact of rough surfaces, ASME J. Tribol., 109, 257, 10.1115/1.3261348 Zhao, 2000, An asperity micro-contact model incorporating the transition from elastic deformation to fully plastic flow, ASME J. Tribol., 122, 86, 10.1115/1.555332 Chang, 1988, Static friction coefficient model for metallic rough surfaces, ASME J. Tribol., 110, 57, 10.1115/1.3261575 Kogut, 2004, A static friction model for elastic–plastic contacting rough surfaces, ASME J. Tribol., 126, 34, 10.1115/1.1609488 Zhang, 2008, An asperity-based mathematical model for the boundary lubrication of nominally flat metallic contacts, Lubr. Sci., 20, 1, 10.1002/ls.49 Bhushan, 1996 Polycarpou, 1999, Analytical approximations in modelling contacting tough surfaces, ASME J. Tribol., 121, 25, 10.1115/1.2833926 McCool, 1992, Non-Gaussian effects in micro-contact, J. Mach. Tools Manuf., 32, 115, 10.1016/0890-6955(92)90068-R Chang, 2012, Effects of negative skewness of surface roughness on the contact and lubrication of nominally flat metallic surface, Proc. Inst. Mech. Eng. J. Eng. Tribol., 227, 559, 10.1177/1350650112465365 Kotwal, 1996, Contact analysis of non-Gaussian surfaces for minimum static and kinetic friction and wear, Tribol. Trans., 39, 890, 10.1080/10402009608983609 Johansson, 1994, Numerical simulation of contact pressure evolution in fretting, J. Tribol., 116, 247, 10.1115/1.2927205 Kucharski, 1994, Finite-elements model for the contact of rough surfaces, Wear, 177, 1, 10.1016/0043-1648(94)90112-0 Põdra, 1999, Simulating sliding wear with finite element method, Tribol. Int., 32, 71, 10.1016/S0301-679X(99)00012-2 T.A. Maxian, T.D. Brown, D.R. Pedersen, J.J. Callaghan, Adaptive Finite Element Modeling of Long-Term Polyethylene Wear in Total Hip Arthroplasty. Hambli, 2001, Blanking tool wear modeling using the finite element method, Int. J. Mach. Tools Manuf., 41, 1815, 10.1016/S0890-6955(01)00024-4 McColl, 2004, Finite element simulation and experimental validation of fretting wear, Wear, 256, 1114, 10.1016/j.wear.2003.07.001 Beheshti, 2010, A Thermodynamic approach for prediction of wear coefficient under unlubricated sliding condition, Tribol. Lett., 38, 347, 10.1007/s11249-010-9614-4 Leonard, 2012, A numerical and experimental investigation of fretting wear and a new procedure for pretting wear maps, Tribol. Trans., 55, 313, 10.1080/10402004.2012.654598 Ghosh, 2013, A stress based damage mechanics model to simulate fretting wear of Hertzian line contact in partial slip, Wear, 307, 87, 10.1016/j.wear.2013.08.008 Sellgren, 2003, A finite element-based model of normal contact between rough surfaces, Wear, 254, 1180, 10.1016/S0043-1648(03)00332-6 Pei, 2005, Finite element modeling of elasto-plastic contact between rough surfaces, J. Mech. Phys. Solids, 53, 2385, 10.1016/j.jmps.2005.06.008 Komvopoulos, 1992, Elastic finite element analysis of multi-asperity contacts, J. Tribol., 114, 823, 10.1115/1.2920955 Majumdar, 1991, Fractal model of elastic–plastic contact between rough surfaces, J. Tribol. Trans. ASME, 113, 1, 10.1115/1.2920588 Whitehouse, 1970, The properties of random surfaces of significance in their contact, Proc. R. Soc. Lond. A: Math. Phys. Sci., 316, 97, 10.1098/rspa.1970.0068 Patir, 1978, A numerical procedure for random generation of rough surfaces, Wear, 47, 263, 10.1016/0043-1648(78)90157-6 Tayebi, 2004, Modeling the effect of skewness and kurtosis on the static friction coefficient of rough surfaces, Tribol. Int., 37, 491, 10.1016/j.triboint.2003.11.010 Totten, 2004, 88 Xie, 1996, The prediction of friction and wear when a soft surface slides against a harder rough surface, Wear, 196, 21, 10.1016/0043-1648(95)06830-9 Rabinowicz, 1965, Effect of abrasive particle size on wear, Wear, 8, 381, 10.1016/0043-1648(65)90169-9 De Pellegrin, 2009, Wear mechanisms and scale effects in two-body abrasion, Wear, 266, 13, 10.1016/j.wear.2008.05.015 Roy Chowdhury, 1979, An analysis of changes in surface topography during running-in of plain bearings, Wear, 57, 331, 10.1016/0043-1648(79)90107-8 Rowe, 1975, Running-in of plain bearings, Wear, 34, 1, 10.1016/0043-1648(75)90303-8 Masouros, 1977, A model for wear and surface roughness during the running-in of bearings transients, Wear, 45, 375, 10.1016/0043-1648(77)90028-X Jeng, 2004, Changes of surface topography during running-in process, J. Tribol., 126, 620, 10.1115/1.1759344 Stout, 1977, Analytical techniques in surface topography and their application to a running-in experiment, Wear, 43, 99, 10.1016/0043-1648(77)90046-1 Sedriks, 1964, The effect of work-hardening on the mechanics of cutting in simulated abrasive processes, Wear, 7, 451, 10.1016/0043-1648(64)90137-1 Komvopoulos, 1985, The mechanism of friction in boundary lubrication, J. Tribol., 107, 452, 10.1115/1.3261108 Jeng, 2000, Changes of surface topography during wear for surfaces with different height distributions, Tribol. Trans., 43, 749, 10.1080/10402000008982404 Chilamakuri, 1998, Contact analysis of non-Gaussian random surfaces, Proc. Inst. Mech. Eng. Part J: J. Eng. Tribol., 212, 19, 10.1243/1350650981541868 Bayer, 2002 Henein, 2015, In situ measuring technique in engine cylinders, Tribol. Lubr. Technol., 46 Lacey, 1991, The calculation of wear coefficients for plastic contacts, Wear, 145, 367, 10.1016/0043-1648(91)90142-H