Estimation of mean tree height using small-footprint airborne LiDAR without a digital terrain model
Tóm tắt
In order to estimate mean tree height using small-footprint airborne light detection and ranging (LiDAR) data, a digital terrain model (DTM), which is a continuous elevation model of the ground surface, is usually required. However, generating accurate DTMs in mountainous forests using only the LiDAR data is laborious and time consuming, because it requires human-assisted methods, especially in the forests with poor laser penetration rates. Based on our previous finding that a hypothetical continuous surface model passing through the predominant tree tops (hereafter, called the “top surface model” or TSM) might be nearly parallel to a DTM, we assumed that the vertical difference between the TSM and the ground return was the mean tree height. According to this assumption, we propose a new methodology that does not require a DTM to estimate mean tree height. This method completely, automatically, and directly estimates mean tree height (MTH
E) from the LiDAR data without requiring a regression analysis using reference data. From the relationships between the MTH
E and the observed mean tree height (MTH
O) in different hinoki cypress forests, we demonstrate that this method effectively estimates the mean tree height with nearly 1-m accuracy.
Tài liệu tham khảo
Evans JS, Hudak AT (2007) A multiscale curvature algorithm for classifying discrete return LiDAR in forested environments. IEEE Trans Geosci Remote Sens 45:1029–1038
Gobakken T, Næsset E (2004) Estimation of diameter and basal area distributions in coniferous forest by means of airborne Laser Scanner Datao. Scand J For Res 19:529–542
Hodgson ME, Jensen JR, Schmidt L, Shill S, Davis B (2003) An evaluation of LIDAR- and IFSAR-derived digital elevation models in leaf-on conditions with USGS Level 1 and Level 2 DEMs. Remote Sens Environ 84:295–308
Hollaus M, Wagner W, Eberhöfer C, Karel W (2006) Accuracy of large-scale canopy heights derived from LiDAR data under operational constraints in a complex alpine environment. ISPRS J Photogramm Remote Sens 60:323–338
Hyyppä J, Kelle O, Lehikoinen M, Inkinen M (2001) A segmentation based method to retrieve stem volume estimates from 3-D tree height models produced by laser scanners. IEEE Trans Geosci Remote Sens 39:969–975
Hyyppä J, Hyyppä H, Leckie D, Gougeon F, Yu X, Maltamo M (2008) Review of methods of small-footprint airborne laser scanning for extracting forest inventory data in boreal forests. Int J Remote Sens 29:1339–1366
Kraus K, Pfeifer N (1998) Determination of terrain models in wooded areas with airborne laser scanner data. ISPRS J Photogramm Remote Sens 53:193–203
Lee HS, Youman NH (2003) DTM extraction of Lidar returns via adaptive processing. IEEE Trans Geosci Remote Sens 41:2063–2069
Lim K, Treitz P, Baldwin K, Morrison I, Green J (2003) Lidar remote sensing of biophysical properties of tolerant northern hardwood forests. Can J Remote Sens 29:648–678
Maltamo M, Eerikäinen K, Pitkänen J, Hyyppä J, Vehmas M (2004) Estimation of timber volume and stem density based on scanning laser altimetry and expected tree size distribution functions. Remote Sens Environ 90:319–330
Matsue K, Ito T, Naito K (2006) Estimating forest resources using airborne LiDAR-Estimating stand parameters of Sugi (Cryptomeria japonica D Don) and Hinoki (Chamaecyparis obtsusa Endl.) stands with differing densities. J Jpn Soc Photogramm Remote Sens 45:4–13 (in Japanese with English summary)
Næsset E (2002) Predicting forest stand characteristics with airborne scanning laser using a practical two-stage procedure and field data. Remote Sens Environ 80:88–99
Næsset E, Gobakken T (2005) Estimating forest growth using canopy metrics derived from airborne laser scanner data. Remote Sens Environ 96:453–465
Næsset E, Økland T (2002) Estimating tree height and tree crown properties using airborne scanning laser in a boreal nature reserve. Remote Sens Environ 79:105–115
Otsu N (1979) A threshold selection method from gray-level histogram. IEEE Trans System Man Cybernet 8:62–66
Packalén P, Maltamo M (2006) Predicting the plot volume by tree species using airborne laser scanning and aerial photographs. For Sci 52:611–622
Patenaude G, Hill RA, Milne R, Gaveau DLA, Briggs BBJ, Dawson TP (2004) Quantifying forest above ground carbon content using LiDAR remote sensing. Remote Sens Environ 93:368–380
Persson A, Holmgren J, Soderman U (2002) Detecting and measuring individual trees using an airborne laser scanner. Photogramm Eng Remote Sens 68:925–932
Popescu SC, Wynne RH, Nelson RF (2002) Estimating plot-level tree heights with lidar: local filtering with a canopy-height based variable window size. Comput Electr Agric 37:71–95
Saito M, Katoh M (2004) Periodic change of hinoki (Chamaecyparis obtusa Sieb.) plantation on Terasawayama experimental forest—1997 and 2003 forest inventory data comparison. Bull Shinshu Univ AFC No. 2, pp 67–74 (in Japanese with English summary)
Takahashi T, Yamamoto K, Takenaka C, Umemura T (2000) The effect of topographical factors on tree height growth. Nagoya Univ For Sci 19:49–53 (in Japanese with English summary)
Takahashi T, Yamamoto K, Senda Y, Tsuzuku M (2005a) Estimating individual tree heights of sugi (Cryptomeria japonica D. Don) plantations in mountainous areas using small-footprint airborne LiDAR. J For Res 10:135–142
Takahashi T, Yamamoto K, Senda Y, Tsuzuku M (2005b) Predicting individual stem volumes of sugi (Cryptomeria japonica D. Don) plantations in mountainous areas using small-footprint airborne LiDAR. J For Res 10:305–312
Takahashi T, Yamamoto K, Miyachi Y, Senda Y, Tsuzuku M (2006) The penetration rate of laser pulses transmitted from a small-footprint airborne LiDAR: a case study in closed canopy, middle-aged pure sugi (Cryptomeria japonica D. Don) and hinoki cypress (Chamaecyparis obtusa Sieb. et Zucc.) stands in Japan. J For Res 11:117–123
Wagner W, Eberhöfer C, Hollaus M, Summer G (2004) Robust filtering of airborne laser scanner data for vegetation analysis. Int Arch Photogramm Remote Sens Spat Inform Sci 36:56–61