A review of wind turbine bearing condition monitoring: State of the art and challenges

Global Wind Energy Council. Global Wind Report Annual Market Update. 2013 Sheng S, Veers P. Wind Turbine Drivetrain Condition Monitoring – An Overview. Presented at the Mechanical Failures Prevention Group: Applied Systems Health Management Conference 2011 Virginia Beach, Virginia. May 10 – 12; 2011 Stadler, 2013, Premature bearing failures in Industrial Gearboxes Renewable Energy World Magazine. Analyzing gearbox failure and preventing it .March/April; 2015. Fischer, 2012, Reliability-centered maintenance for wind turbines based on statistical analysis and practical experience, IEEE Trans Energy Convers, 27, 10.1109/TEC.2011.2176129 Li, 2015, Reliability assessment of generic geared wind turbines by GTST-MLD model and Monte Carlo simulation, Renew Energy, 83, 222, 10.1016/j.renene.2015.04.035 Igba, 2015, Performance assessment of wind turbine gearboxes using in-service data: current approaches and future trends, Renew Sustain Energy Rev, 50, 144, 10.1016/j.rser.2015.04.139 Pérez, 2013, Wind turbine reliability analysis, Renew Sustain Energy Rev, 23, 463, 10.1016/j.rser.2013.03.018 Sheng S, Keller J, Glinsky C. Gearbox reliability collaborative update. Sandia Reliability Workshop Albuquerque. August 13-14; 2013. NREL/PR-5000-60141 Kusiak, 2012, Analyzing bearing faults in wind turbines: a data-mining approach, Renew Energy, 48, 110, 10.1016/j.renene.2012.04.020 Amirat Y. Choqueuse V, Benbouzid M. Wind turbine bearing failure detection using generator stator current homopolar component ensemble empiric al mode decomposition IEEE. IEEE IECON. Montreal, Canada. 2012. p.3937–42 Tchakoua, 2014, Wind Turbine Condition Monitoring: State-of-the-Art Review, New Trends, and Future Challenges, Energies, 7, 2595, 10.3390/en7042595 Wind Energy Update. 7th annual wind Energy Operations & Maintenance Dallas Summit. Texas, USA, 14-15 April 2015. Márquez, 2012, Condition Monitoring of Wind Turbines: Techniques and Methods, Renewable Energy, 46, 169, 10.1016/j.renene.2012.03.003 Sharma, 2013, Condition Monitoring of Wind Turbines: A Review, International Journal of Scientific Engineering Research, Volume 4 Verbruggen, 2009, Condition Monitoring: Theory and Practice, 2009, Wind Turbine Condition Monitoring Workshop, 8 Yang, 2010, Cost Effective Condition Monitoring For Wind Turbines, IEE Transactions on Industrial Electronics, 57 Dupuis, 2010, Application of Oil Debris Monitoring For Wind Turbine Gearbox Prognostics and Health Management, Annual Conference of the Prognostics and Health Management Society Whittle M. Wind Turbine Generator Reliability: An Exploration of the Root Causes of Generator Bearing Failures, Durham theses, Durham University. 2013 Available at Durham E-Theses Online: 〈http://etheses.dur.ac.uk/9422/〉 Tian, 2011, Condition based maintenance optimization for wind power generation systems under continuous monitoring, Renewable Energy, 36, 1502, 10.1016/j.renene.2010.10.028 Verbruggen TW. Wind Turbine Operation & Maintenance based on Condition Monitoring WT-Ω. April 2003 ECN-C--03-047 Costinas S, Diaconescu I, Fagarasanu J. Wind Power Plant Condition Monitoring. Proceedings of the 3rd WSEAS Int. Conf. on Energy Planning, Energy Saving, Environmental Education. ISSN: 1790-5095. ISBN: 978-960-474-093-2 Rogers AL, Manwell JF, Wright S. Wind Turbine Acoustic Noise. White paper. 2002/2006. Renewable Energy Research Laboratory Department of Mechanical and Industrial Engineering. University of Massachusetts at Amherst. Amherst, MA 01003. 413-545-4359 〈www.ceere.org/rerl〉 National Instruments Products for Wind Turbine Condition Monitoring. White Paper. Publish Date: Nov 13, 2014 〈http://www.ni.com/white-paper/7676/en/〉 accessed on November 25, 2014. Niknam, 2013, Analysis of Acoustic Emission Data for Bearings subject to Unbalance, Int. J. Prognost. Health Manag., 4, 1 Kharche PP, Kshirsagar SV. Review of Fault Detection in Rolling Element Bearing. International Journal of Innovative Research in Advanced Engineering (IJIRAE) ISSN: 2349-2163 Volume 1 Issue 5 (June 2014). 〈http://ijirae.com〉 L.B. Tjernberg P. Wennerhag. Wind Turbine Operation and Maintenance Elforsk report 12:41. October; 2012 Yang, 2014, Wind turbine condition monitoring: technical and commercial challenges, Wind Energy Special Issue: Cond Monit, 17, 673, 10.1002/we.1508 Urbanek, 2014, Integrated modulation intensity distribution as a practical tool for condition monitoring, Appl. Acoust, 77, 184, 10.1016/j.apacoust.2013.08.020 Toms, 2014 Sheng S. Report on wind turbine subsystem reliability ─ a survey of various database National Renewable Energy Laboratory. NREL/PR-5000-59111. 2013 Koulocheris, 2013, Vibration Signals and Condition Monitoring for Wind Turbines, Engineering, 5, 948, 10.4236/eng.2013.512116 Shakya, 2013, Vibration-based fault diagnosis in rolling element bearings: ranking of various time, frequency and time-frequency domain data-based damage identification parameters, Int J Cond Monit, 3 Guo, 2012, Wind Turbine Tower Vibration Modeling and Monitoring by the Nonlinear State Estimation Technique (NSET), Energies, 5, 5279, 10.3390/en5125279 Yang, 2003, 12-14 Siegel D, Ly C, Lee J. Evaluation of Vibration-Based Health Assessment and Diagnostic Techniques for Helicopter Bearing Components AIAC14 Fourteenth Australian International Aerospace Congress. Seventh DSTO International Conference on Health Usage Monitoring. 2011 Sheng S. Wind Turbine Gearbox Condition Monitoring Round Robin Study – Vibration Analysis National Renewable Energy Laboratory.Technical Report NREL/TP-5000-54530. July; 2102 Pérez, 2015 Liu X, Leimbach KR, Hartmann D, Höffer R. Signal analysis using wavelets for structural damage detection applied to wind energy converters. In: Proceedings of the 14th International Conference on Computing in Civil and Building Engineering. Moscow, Russia. 27–29 June; 2012 Yang Q, An D. EMD and Wavelet Transform Based Fault Diagnosis for Wind Turbine Gear Box Hindawi Publishing Corporation. Advances in Mechanical Engineering Volume 2013.http://dx.doi.org/10.1155/2013/212836, Article ID 212836, 9 pages Al-Ahmar, 2008, Wind Energy Conversion Systems Fault Diagnosis Using Wavelet Analysis, Int Rev Electric Eng, 3, 646 Watson, 2010, Condition monitoring of the power output of wind turbine generators using wavelets, IEEE Trans Energy Convers, 25, 715, 10.1109/TEC.2010.2040083 Oh, 2012, Precursor monitoring approach for reliability assessment of cooling fans. Springer, LLC 2009, J Intell Manuf, 23, 173, 10.1007/s10845-009-0342-2 Elforjani, 2010, 47, 350 Eftekharnejad, 2011, The application of spectral kurtosis on Acoustic Emission and vibrations from a defective bearing, Mech Syst Signal Process, 25, 266, 10.1016/j.ymssp.2010.06.010 Kilundu, 2011, Cyclostationarity of Acoustic Emissions (AE) for monitoring bearing defects, Mech Syst Signal Process, 25, 2061, 10.1016/j.ymssp.2011.01.020 Elforjani, 2012, Detecting AE Signal from Natural Degradation of Slow Speed Rolling Element Bearings, Cond Moni Mach Non-Station Operat, 61 Nienhaus K, Boos FD, Garate K, Baltes R. Development of Acoustic Emission (AE) based defect parameters for slow rotating roller bearings. In: Proceedings of the 25th International Congress on Condition Monitoring and Diagnostic Engineering IOP Publishing Journal of Physics: Conference Series 364 2012 012034 doi: 10.1088/1742-6596/364/1/012034. Sandoval, 2013, Acoustic emission-based early fault detection in tapered roller bearings, Ingenieria e Investig, 33, 5, 10.15446/ing.investig.v33n3.41032 Jian, 2013, Detection of Bearing/Rail Defects for Linear Motion Stage Using Acoustic Emission, Int J Precision Eng Manuf, 14, 2043, 10.1007/s12541-013-0256-y Towsyfyan H, Raharjo P, Gu F, Ball A. Characterization of Acoustic Emissions from Journal Bearings for Fault Detection NDT. Telford, UK. 10th-12th September; 2013, Jia H, Wu X, Liu X, Liu C, Wang Z. Analysis and Research of Acoustic Emission Signal of Rolling Element Bearing Fatigue. Advances in Acoustic Emission Technology: Proceedings of the World Conference on Acoustic Emission-2013, Springer Proceedings in Physics 158, DOI 10.1007/978-1-4939-1239-1_15 Law, 2013, An Approach to Monitoring the Thermomechanical Behavior of a Spindle Bearing System Using Acoustic Emission (AE), Energy. Int J Precision Eng Manufg, 14, 1169, 10.1007/s12541-013-0159-y Ali, 2014, Acoustic emission technique in condition monitoring and fault diagnosis of gears and bearings, Int J Acad Res, 6, 133 Cárcel, 2014, Use of Spectral Kurtosis for Improving Signal to Noise Ratio of Acoustic Emission Signal from Defective Bearings, ASM Int, 14, 363 Chacon, 2015, A novel approach for incipient defect detection in rolling bearings using acoustic emission technique, Appl Acoust, 89, 88, 10.1016/j.apacoust.2014.09.002 Renaudin, 2010, Natural roller bearing fault detection by angular measurement of true instantaneous angular speed, Mech Syst Signal Process, 24, 1998, 10.1016/j.ymssp.2010.05.005 Holweger, 2012, Non-destructive subsurface damage monitoring in bearings failure mode using fractal dimension analysis, Ind Lubr Tribol, 64/3, 132, 10.1108/00368791211218650 Neti P, Zhang P, Shah M, Younsi K. Electrical Signature Analysis Based Online Monitoring of Drive-trains for Doubly-fed Wind Generators. In: Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society 2012 doi: 10.1109/IECON.2012.6388934. Whittle, 2013, Bearing currents in wind turbine generators, J Renew Sustain Energy, 5, 053128, 10.1063/1.4822048 Harlişca C, Szabó L, Frosini L, Albini A. Diagnosis of Rolling Bearings Faults in Electric Machines through Stray Magnetic Flux Monitoring. In: Proceedings of the 8th International Symposium On Advanced Topics In Electrical Engineering. 23 25 May; 2013 Amirat, 2013, EEMD-based wind turbine bearing failure detection using the generator stator current homopolar component, Mech Syst Signal Process, 41, 667, 10.1016/j.ymssp.2013.06.012 Oberg, 2013, Electrical monitoring of crack propagation during quasi-static loading and ballistic impact of alumina plates, J Eur Ceram Soc, 33, 2663, 10.1016/j.jeurceramsoc.2013.04.013 Romanenko A, Ahola J, Muetze A, Niskanen V. Study of incipient bearing damage monitoring in variable-speed drive systems Conference: EPE. ECCE Europe, At Lappeenranta, Finland. 2014 Machado, 2014, Diagnosis of faults in the bearings by electrical measures and numerical simulations, Mechanics Industry, 15, 383, 10.1051/meca/2014053 Uluyol O, Parthasarathy G, Foslien W, Kim K. Power Curve Analytic for Wind Turbine Performance Monitoring and Prognostics Annual Conference of the Prognostics and Health Management Society. 2011. Kim SY, Ra IH, Kim SH. Design of wind turbine fault detection system based on performance curve SCIS-ISIS. Kobe, Japan. 20-24 November; 2012 Guo P. Wind Turbine Generator Bearing Condition Monitoring with NSET Method Conference: Control and Decision Conference (CCDC). 2012 doi: 10.1109/CCDC.2012.6244033.24th Chinese Yang, 2013, Wind turbine condition monitoring by the approach of SCADA data analysis, Renew Energy, 53, 365e376, 10.1016/j.renene.2012.11.030 Astolfi, 2014, Fault Prevention and Diagnosis Through SCADA Temperature Data Analysis of an Onshore Wind Farm, Diagnostyka, 15 Shahriar, 2015, 143 Bai, 2011, The Condition Monitoring of Large Slewing Bearing Based on Oil Analysis Method, Vols 474-476, 716 Jiang, 2012, Failure Analysis of Rolling Bearing Based on Oil Monitoring Techniques with Mechanics Basis, Vol. 164, 401 Jiang X, Liu F, Zhao P. Gearbox Non-ferrous Metal Bearing Wear Condition Monitoring Based on Oil Analysis. In: Helen Zhang, David Jin (Eds.), Applied Mechanics and Materials Vol 164. Trans Tech Publications. Switzerland. 2012. p. 73–76 doi: 10.4028/www.scientific.net/AMM.164.73. Miao, 2011, Identification of multiple characteristic components with high accuracy and resolution using the zoom interpolated discrete Fourier transform, Meas Sci Technol, 22, 10.1088/0957-0233/22/5/055701 Jayaswal, 2011, New Trends In Wind Turbine Condition Monitoring System, Int J Emerg Trends Eng Dev, 3, 133 Abdussiam S, Ahmed M, Raharjo P, Gu F, Ball AD. Time Encoded Signal Processing and Recognition of incipient bearing faults conference. In: Proceedings of the 17th International Conference on Automation and Computing, ICAC 2011.Huddersfield, United Kingdom. September 10; 2011. Source: DBLP Ziani, 2012, Bearing Fault Diagnosis Using Neural Network and Genetic Algorithms with the Trace Criterion, Condition Monit Mach Non-Station Operat, 89, 10.1007/978-3-642-28768-8_10 Waters, 2013, Targeting Faulty Bearings for an Ocean Turbine Dynamometer, Int J Prognost Health Manag, 021 T. Liu J. Lee P. Singh G. Liu. Using acceleration measurements and neuro-fuzzy systems for monitoring and diagnosis of bearings Proc SPIE 8916, 2013, 10.1117/12.2035880.10 M. Sarvajith B. Shah S. Kulkarni S. Jana. Condition Monitoring of Rolling Element Bearing Using Wavelet Transform and Support Vector Machine Conference: NCCM 2013. Roulias, 2013, A Statistical Feature utilising Wavelet Denoising and Neighblock Method for Improved Condition Monitoring of Rolling Bearings, Italian Assoc Chem Eng P. Borghesani P. Pennacchi S. Chatterton. The relationship between kurtosis- and envelope-based indexes for the diagnostic of rolling element bearings Politecnico di Milano, Dipartimento di Meccanica, Via la Masa 1, 20156 Milano, Italy, Mechanical Systems and Signal Processing 43 s 1–2 2014 25 43 doi: 10.1016/j.ymssp.2013.10.007.01 C.K.E. Nizwan S.A. Ong M.F.M. Yusof M.Z. Baharom. A wavelet decomposition analysis of vibration signal for bearing fault detection IOP Conference Series Materials Science and Engineering 50 1. 2013 doi: 10.1088/1757-899X/50/1/012026.11 H.S. Kumar. ANN based evaluation of performance of wavelet transform for condition monitoring of rolling element bearing Conference: ICoNDM-2013, Chennai. Volume: 64. 2013. p. 805–14 Sun, 2013, Fault diagnosis of rolling bearing based on wavelet transform and envelope spectrum correlation, J Vib Control, 19, 924, 10.1177/1077546311435348 W. Li Z. Huang H. Lin K. Ding. Envelope analysis by wavelet-filter based spectral kurtosis for bearing health monitoring Conference: Instrumentation and Measurement Technology Conference (I2MTC) , IEEE International. 2013 Zhao M, Lin J, Xu X, Lei Y. Tacholess envelope order analysis and its application to fault detection of rolling element bearings with varying speeds. School of Mechanical Engineering, Xi׳an Jiaotong University, Xi׳an 710049, China. Sensors. 01/2013. 13(8):10856-10875. DOI: 10.3390/s130810856 Source: PubMed Sun, 2014, Wind turbine fault detection using multiwavelet denoising with the data-driven block threshold, Appl Acoust, Volume 77, 122, 10.1016/j.apacoust.2013.04.016 Liang, 2014, Intelligent bearing fault detection by enhanced energy operator, Expert Syst Appl, Volume 41, 7223, 10.1016/j.eswa.2014.05.026 Unala, 2014, Fault diagnosis of rolling bearings using a genetic algorithm optimized neural network, Measurement, Volume 58, 187, 10.1016/j.measurement.2014.08.041 Dybala, 2014, Rolling bearing diagnosing method based on Empirical Mode Decomposition of machine vibration signal, Appl Acoust, Volume 77, 195, 10.1016/j.apacoust.2013.09.001 F. Dalvand S. Shokohi A. Kalantar H. Bevrani. Time-Domain Bearing Condition Monitoring in Induction Motors Using Instantaneous Frequency of Motor Voltage Conference: Smart Grid Conference, At Iran, Tehran. 2014 Ma, 2014, Fault Monitoring and Classification Method of Rolling Bearing Based on KICA and LSSVM, Adv Mater Res, 971-973, 476, 10.4028/www.scientific.net/AMR.971-973.476 Shakya, 2014, A novel methodology for online detection of bearing health status for naturally progressing defect. Department of Mechanical Engineering, Indian Institute of Technology Delhi, New Delhi 110016, India, J Sound Vib, 333, 5614, 10.1016/j.jsv.2014.04.058 Ahn, 2014, Fault Detection of a Roller-Bearing System through the EMD of a Wavelet Denoised Signal, 14, 15022 Zimroz, 2014, Diagnostics of bearings in presence of strong operating conditions non-stationarity—A procedure of load-dependent features processing with application to wind turbine bearings, Mech Syst Signal Process, 46, 16, 10.1016/j.ymssp.2013.09.010 Wang, 2014, Rolling element bearing fault diagnosis via fault characteristic order (FCO) analysis, Mech Syst Signal Process, 45, 139, 10.1016/j.ymssp.2013.11.011 Khanam, 2014, Fault Size Estimation in the Outer Race of Ball Bearing Using Discrete Wavelet Transform of the Vibration Signal, Procedia Technol, 14, 12, 10.1016/j.protcy.2014.08.003 Saidi, 2014, Application of higher order spectral features and support vector machines for bearing faults classification, ISA Trans, 3 Zareia, 2014, Vibration analysis for bearing fault detection and classification using an intelligent filter, Mechatronics, 24, 151, 10.1016/j.mechatronics.2014.01.003 Liu, 2014, A fault diagnosis method based on local mean decomposition and multi-scale entropy for roller bearings, 75, 67 Guo, 2014, Envelope extraction based dimension reduction for independent component analysis in fault diagnosis of rolling element bearing, J Sound Vib, 333, 2983, 10.1016/j.jsv.2014.02.038 Ali, 2015, Application of empirical mode decomposition and artificial neural network for automatic bearing fault diagnosis based on vibration signals, Appl Acoust, 89, 16, 10.1016/j.apacoust.2014.08.016 Caesarendra, 2015, Moodie CAS. Application of the largest Lyapunov exponent algorithm for feature extraction in low speed slew bearing condition monitoring, Mechanica System Signal Process, 50–51, 116, 10.1016/j.ymssp.2014.05.021 Ming, 2015, Envelope calculation of the multi-component signal and its application to the deterministic component cancellation in bearing fault diagnosis, Mech Syst Signal Process, 50–51, 70, 10.1016/j.ymssp.2014.05.033 Shakya, 2015, Bearing diagnosis based on Mahalanobis–Taguchi–Gram–Schmidt method, Volume 337, 342 Dempsey, 2011, Investigation of Bearing Fatigue Damage Life Prediction Using Oil Debris Monitoring, NASA/TM, 217117 S. Butler F. O’Conno D. Farren J.V. Ringwood. A Feasibility Study into Prognostics for the Main Bearing of A Wind Turbine. In: Proceedings of the IEEE International Conference on Control Applications (CCA), Dubrovnik, Croatia. 1092 1097. 3-5 October; 2012 Lau BCP, Ma EWM. Review of Offshore Wind Turbine Failures and Fault Prognostic Methods IEEE MU3270.Prognostics & System Health Management Conference (PHM-2012 Beijing), 2012 X. Chen Z. Shen Z. He C. Sun Z. Liu. Remaining Life Prognostics of Rolling Bearing Based on Relative Features and Multivariable SVM Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science published online 11; 2013, 10.1177/0954406212474395. January Soualhi, 2014, Bearing Health Monitoring Based on Hilbert--Huang Transform, Support Vector Machine, and Regression, IEEE Trans Instrum Meas Boškoskia, 2015, Bearing fault prognostics using Rényi entropy based features and Gaussian process models, Mech Syst Signal Process, 52–53, 327, 10.1016/j.ymssp.2014.07.011 Ali, 2015, Accurate bearing remaining useful life prediction based on Weibull distribution and artificial neural network, Mech Syst Signal Process, 56–57, 150 Fourth Annual Wind Farm Data Management and Analysis: Turning Big Data into Business Value. 18-20 November 2014. Swissotel Bremem, Germany. Igba, 2014, Effect of preventive maintenance intervals on reliability and maintenance costs of wind turbine gearboxes, Wind Energy, 18, 2013, 10.1002/we.1801 Juárez, 2013, Development of the wind power in Brazil: political, social and technical issues, Renew Sustain Energy Rev, 39, 828, 10.1016/j.rser.2014.07.086 Kusiak, 2013, Prediction, operations, and condition monitoring in wind energy, Energy, 60, 1, 10.1016/j.energy.2013.07.051