Characterization and investigation of the deformation behavior of porous magnesium scaffolds with entangled architectured pore channels

Amirkhani, 2012, Effects of pore geometry and loading direction on deformation mechanism of rapid prototyped scaffolds, Acta Mater., 60, 2778, 10.1016/j.actamat.2012.01.044 Bobe, 2013, In vitro and in vivo evaluation of biodegradable, open-porous scaffolds made of sintered magnesium W4 short fobers, Acta Biomater., 9, 8611, 10.1016/j.actbio.2013.03.035 Bobyn, 1992, Producing and avoiding stress shielding: laboratory and clinical observations of noncemented total hip arthroplasty, Clin. Orth. Rel. Res., 274, 79, 10.1097/00003086-199201000-00010 Brydon, 2005, Simulation of the densification of real open-celled foam microstructures, J. Mech. Phys. Solids, 53, 2638, 10.1016/j.jmps.2005.07.007 Cheng, 2012, Compression deformation behavior of Ti–6Al–4V alloy with cellular structures fabricated by electron beam melting, J. Mech. Bahav. Biomed., 16, 153, 10.1016/j.jmbbm.2012.10.005 Cox, 2013, Anisotropic mechanical properties of amorphous Zr-based foams with aligned, elongated pores, Acta Mater., 61, 5937, 10.1016/j.actamat.2013.06.028 Cheng, 2016, A novel open-porous magnesium scaffold with controllable microstructures and properties for bone regeneration, Sci. Rep., 6, 1 D’Angelo, 2013, Influence of the loading direction on the mechanical behavior of ceramic foams and lattices under compression, Acta Mater., 61, 5525, 10.1016/j.actamat.2013.06.009 Fenner, 2012 Gibson, 2005, Biomechanics of cellular solids, J. Biomech., 38, 377, 10.1016/j.jbiomech.2004.09.027 Gibson, 1997 Harders, 2005, Influence of cell wall shape and density on the mechanical behavior of 2D foam structures, Acta Mater., 53, 1335, 10.1016/j.actamat.2004.11.025 He, 2012, Porous titanium materials with entangled wire structure for load-bearing biomedical applications, J. Mech. Bahav. Biomed., 5, 16, 10.1016/j.jmbbm.2011.09.016 Henderson, 2014, Magnesium alloys as a biomaterial for degradable craniofacial screws, Acta Biomater., 10, 2323, 10.1016/j.actbio.2013.12.040 Hollister, 2005, Porous scaffold design for tissue engineering, Nat. Mater., 4, 518, 10.1038/nmat1421 Jiang, 2014, A new approach to the fabrication of porous magnesium with well-controlled 3D pore structure for orthopedic applications, Mater. Sci. Eng. C, 43, 317, 10.1016/j.msec.2014.07.033 Jiang, 2015, Porous titanium with entangled structure filled with biodegradable magnesium for potential biomedical applications, Mater. Sci. Eng. C, 47, 142, 10.1016/j.msec.2014.11.014 Karageorgiou, 2005, Porosity of 3D biomaterial scaffolds and osteogenesis, Biomaterials, 26, 5474, 10.1016/j.biomaterials.2005.02.002 Kim, 2012, Biomimetic scaffold for tissue engineering, Adv. Funct. Mater., 22, 2446, 10.1002/adfm.201103083 Korner, 2004, Endogenous particle stabilization during magnesium integral foam production, Adv. Eng. Mater., 6, 385, 10.1002/adem.200405147 Li, 2013, Novel magnesium alloys developed for biomedical applications: a review, J. Mater. Sci. Technol., 29, 489, 10.1016/j.jmst.2013.02.005 Luxner, 2007, Numerical simulations of 3D open cell structures-influence of structural irregularities on elasto-plasticity and deformation localization, Int. J. Solids Struct., 44, 2990, 10.1016/j.ijsolstr.2006.08.039 Meille, 2012, Mechanical properties of porous ceramics in compression: on the transition between elastic, brittle, and cellular behavior, J. Eur. Ceram. Soc., 32, 3959, 10.1016/j.jeurceramsoc.2012.05.006 Miled, 2007, Particle size effect on EPS lightweight concrete compressive strength: experimental investigation and modelling, Mech. Mater., 39, 222, 10.1016/j.mechmat.2006.05.008 Nguyen, 2011, A novel manufacturing route for fabrication of topologically-ordered porous magnesium scaffolds, Adv. Eng. Mater., 13, 872, 10.1002/adem.201100029 O’Brien, 2011, Biomaterials & scaffolds for tissue engineering, Mater. Today, 14, 88, 10.1016/S1369-7021(11)70058-X Renger, 2005, Vacuum foaming of magnesium slurries, Adv. Eng. Mater., 7, 117, 10.1002/adem.200400191 Seyedraoufin, 2013, Synthesis, microstructure and mechanical properties of porous Mg-Zn scaffolds, J. Mech. Bahav. Biomed., 21, 1, 10.1016/j.jmbbm.2013.01.023 Song, 2012, Peculiar formation mechanism of a plateau stress region during dynamic compressive deformation of porous carbon steel with oriented cylindrical pores, Acta Mater., 60, 149, 10.1016/j.actamat.2011.11.001 Sotomayor, 2014, Role of cell regularity and relative density on elastoplastic compression response of 3D open-cell foam core sandwich structure generated using Voronoi diagrams, Acta Mater., 78, 301, 10.1016/j.actamat.2014.06.051 Staiger, 2006, Magnesium and its alloys as orthopedic biomaterials: a review, Biomaterials, 27, 1728, 10.1016/j.biomaterials.2005.10.003 Tan, 2009, Study on compression behavior of porous magnesium used as bone tissue engineering scaffolds, Biomed. Mater., 4, 1, 10.1088/1748-6041/4/1/015016 Timoshenko, 1961 Wen, 2004, Compressibility of porous magnesium foam: dependency on porosity and pore size, Mater. Lett., 58, 357, 10.1016/S0167-577X(03)00500-7 White, 2012, The effect of processing variables on morphological and mechanical properties of supercritical CO2 foamed scaffolds for tissue engineering, Acta Biomater., 8, 61, 10.1016/j.actbio.2011.07.032 Xie, 2006, Vibration-damping capacity of lotus-type porous magnesium, Mater. Sci. Eng. A, 417, 129, 10.1016/j.msea.2005.10.061 Yamada, 1999, Processing of an open-cellular AZ91 magnesium alloy with a low density of 0.05g/cm3, J. Mater. Sci. Lett., 18, 1477, 10.1023/A:1006677930532 Zhang, 2014, Preparation and mechanical property of a novel 3D porous magnesium scaffold for bone tissue engineering, Mater. Sci. Eng. C, 42, 362, 10.1016/j.msec.2014.05.044 Zhou, 2004, Mechanisms and mechanics of compressive deformation in open-cell Al foams, Mech. Mater., 36, 781, 10.1016/j.mechmat.2003.05.004 Zhu, 1997, Analysis of the elastic properties of open-cell foams with tetrakaidecahedral cells, J. Mech. Phys. Solids, 45, 319, 10.1016/S0022-5096(96)00090-7 Zhu, 2001, Effects of cell irregularity on the elastic properties of 2D Voronoi honeycombs, J. Mech. Phys. Solids, 49, 857, 10.1016/S0022-5096(00)00046-6